Products

RACK screw for rack cabinet

Note: 6mm screw - fits to RACK-NUT

20 stk. møtrikker til 19” rackskabe og industrikabinetter

19 "temperature gauge with fan control of the 4 built-in fans
Suitable for regulating the temperature in rack cabinets
No speed control.

1U blæserindsats med 4 stk. blæsere til forbedring af luftcirkulationen i rackkabinet. 
Front-afbryder til tænd og sluk af de 4 stk. blæsere
Ingen hastighedsregulering af blæserne 

Plug-in nuts for cabinets and racks
Dimensions: Footprint 13 x 12mm
Dimensions: Screw height 5mm
Dimensions: Clip height 10mm
Dimensions: Clip lock 8mm
Measurements: Plate thickness on post 2mm
Thread: M6

NOTE. Only 6mm nut with clip for RACK post - additional purchase if necessary. counterpart - RACK-SCREW

Temperature gauge with 2 x 230VAC outlet for fan control
230VAC outlets are ON/OFF
Instant fan speed
suitable for regulating the temperature in rack cabinet

Industrial 850 Watt ATX power supply
Efficiency: 80+ Gold
Fully modular cables
1 x 24-pin Motherboard
2 x 4 + 4-pin CPU
6 x 6 + 2 -pin PCI
14 x SATA
5 x MOLEX
1 x Floppy
MTBF: 100,000 hours

48V DC ATX with 12V connector for P4, 2U
These power supplies can be used where the ordinary mains voltage (230 VAC) is not available - eg. in cars or on ships.
There can be supplied three types with +12 V, +24 V or -48 VDC input.
is equipped with EMI filter.

Dimensions: 510 W ATX with P4, PCI-Express and SATA

Dimensions: H 70 x W 100 x D 240

48V DC ATX

400 W ATX til 24 VDC

300 W ATX til 2U 19" rackkabinetter

Input voltage: 90-264Vac
Input frequency: 47-63Hz
Input current: 115Vac @ 6A, 230Vac @ 3A
80 Plus Bronze
Internal 4 cm fan with IEC 62368 standard vents opening
Short circuit protection on all outputs
Working temperature: 0°C to 50°C
Storage temperature: -20°C to + 80°C
Efficiency: 80 Plus Bronze Working humidity: 85% RH non-condensing
Storage humidity: 95% RH non-condensing
CE, FC, Tüv, E190414
Dimension (L x W x H): 190 x 100 x 40.5 (mm)

300W SFX, with auto detection of AC

Dimensions: H 64 x W 125 x D 100

300 W ATX PSU with P4
Auto 110V/230V
20 pins
Ball bearing DC fan
Low noise
Dimensions: H 86 x W 150 x D 140

180 W ITX with P4 connector

Dimensions: W 82 x L 150 x H 40mm

Transient protection for 10/100 Mbps network

4kV to ground.

2 x RJ45 female

Ground wire is to be connected.

12V DC ATX

Transient protection for 10/100Mbit networks. 4kV to earth.
Transmits PoE voltage.
2 x RJ45 female.
Ground wire must be connected.

1200 W ATX med P4, PCI-Express og SATA
VOLTAGE：90～264VAC
FREQUENCY： 47～63HZ
INPUT CURRENT：15 (RMS) FOR 120 VAC / 8A (RMS) FOR 230 VAC
INRUSH CURRENT：40A MAX. FOR 120 VAC / 80A MAX. FOR 230 VAC
PFC CAN REACH THE TARGET OF 95% @230VAC, FULL LOAD
HOLD UP TIME：WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 12mS IN REGULATION LIMIT AT NORMAL INPUT VOLTAGEEFFICIENCY：TYPICAL 80-85% AT 25℃ 115V FULL LOAD
POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
OVER POWER PROTECTION：TRIP POINT TOTAL POWER MIN. 110%, MAX. 150%
OVER VOLTAGE PROTECTION：+5V→5.8V～6.7V, 3.3V→3.6V～4.3V, +12V→13.2V～15V
OVER CURRENT PROTECTOIN: +3.3V→37.4~51A, +5V→37.4~51A, +12V→110~150A
SHORT CIRCUIT ：+5V、-5V、+12V、-12V、+3.3V
RESTART AFTER PROTECTION
TEMPERATURE RANGE：OPERATING 0℃～40℃
LEAKAGE CURRENT: 1.5MA MAX. AT NOMINAL VOLTAGE VAC
EMI NOISE FILTER : FCC CLASS B , CISPR22 CLASS B
SAFETY : TO MEET UL, CUL, TUV, CCC
REMOTE ON/OFF CONTROL
160x150x86(mm)

Transient protection for 10/100/1000 Mbit networks

10kV to ground.

2 x RJ45 female.

Ground wire should be connected. 

The diverter surge to ground
Acc. IEC 6100042 standard
Have mini USB plug for 5VDC power supply to "Pin18" - not included
HDMI pin18 is + 5VDC from the HDMI source.

Kassebonprinter med auto klipper

Kassebonprinter med auto klipper

Adapter fra 2½” harddisk til 3½” kabel

Trigger til at åbne pengeskuffer med Epson, Citizen eller Star interface

Trigger to open cash drawers with Epson, Citizen or Star interface

Med indbygget touch skærm og bon printer

PS2 keyboard with magnetic card reader and key.

Program for key macro is on DANBIT FTP Server

Log in to www.danbit.dk.

When you have the item on the screen, DOWNLOADS will be active and you can download technical information.

Optical insulation which ensures the notebook
Seriel RS422/485 PCMCIA/CardBus Controller
Driver for Windows 98, ME, NT 4.0, 2000, XP, VISTA, 7 (32/64BIT), 8 and Linux

Expansion box with 4 pcs. PCI slot. Controller card is PCI Express for the PC.

12VDC power supply and cable included

Expansion box with 4 pcs. PCI slot for full-size cards.
Controller card is PCIE ten PCen

12VDC power supply and cable included

Multimeter with capacity measurement
This is a discontinued model and is EOL!
Cannot be interfaced to PC! (although there is a port for it).

Limited stock!

Multimeter with clear multi display
Note does not have an interface for a PC (although there is a port for it)
EOL product limited stock
DC Voltage: 400mV 0.5% +2dgts 4V to 1000V 0.8% +2dgts
AC Voltage: 4V to 750V 1.5%+3dgts(40~500)
DC Current: 400 to 400 1.0%+2dgts 20A 2.5% +3dgts
AC Current: 400 to 4 1.0% + 5dgts(40~500), 40 to 400 1.5% +5dgts(40~500), 20A 3.0% +4dgts(40~500)
Resistance: 400 to 400, 0.8% +2dgts, 4 1.0% +4dgts
Capacitance: 4 to 400 2.0% + 5dgts,  4 to 40 3.0% + 5dgts 200 5.0% + 5dgts
Frequency: 4 to 4 0.1% + 1dgts
Temperature: -40C ~ 20C 3.0% + 5dgts,  200C ~ 1200C 3.0% + 2dgts
Logic: Three logic level (Low,---, Hi)
Continutiy: Buzzer sounds of Resistance less than 800 
Diode: Yes
hFE: Yes
Signal_out: 1 ~ 10 (13 steps)

PCI Express parallelkort med 2 stk. DB25 stik

PCI Express parallel card with 1. DB25 port
Most drivers up to Win10 available in the Download

8 af de digitale udgange kan trække op til 500mA pr. kanal 

16 optoisolerede indgange, fælles stel (minus) og 16 optoisolerede udgange,

Supports a 32-bit 5 V PCIe Express bus - LOW PROFILE CARD
16-CH isolated digital inputs
16-CH isolated digital outputs - Open-Collector
5000 VRMS optical isolation
Sink current up to 500 mA on each isolated output

Supports a 32-bit 5 V PCI bus
64-CH isolated digital inputs
2500 VRMS optical isolation
Sink current up to 500 mA on each isolated output

16 optoisolerede indgange, fælles stel (minus) og 16 optoisolerede udgange, 

Supports a 32-bit 5 V PCI bus
16-CH isolated digital inputs
16-CH isolated digital outputs - Open-Collector
5000 VRMS optical isolation
Sink current up to 500 mA on each isolated output

With condition detector on all 32 inputs
optoisulated inputs - 2.5kv - Common frame
logic: Low 0-3,2vdc, High: 3.5 - 24VDC

The DB9 Null Modem Adapter converts a standard serial cable into a Null Modem cable

1 piece. DB25 male and 1pc. DB25 female Type 1

1 piece. DB25 male and 1pc. DB25 female Type 3

Device to turn on/off via the Internet.
With Wi-Fi
4 x 230 VAC sockets - IEC C-13
1 x C-14 input.
Web server built-in
Password protected.

Track - 20 x 230 V outlet, built-in power consumption meter.
Can be cascaded with nine slaves.
Ethernet password. logo Email alert for exceeding limits and the errors
1-pole relay output - switcher L

Web-based remote control of switching on/off via the Internet
Built-in Web Server. Username + Password
MQTT, Cloud, SNMP
APP for Smartphone
Watchdog with ping of stable website (Google etc.)
4 x 230 VAC sockets - IEC C-13 output 10A and C-14 input 15A.
Web server built-in - password-protected.
VPN Client
Supports: HTTP, HTTPS/SSL, TCP/IP, PPPOE, DHCP, DDNS, SNMP v3, SMTP, NTP, TLS
Supports: Cloud Connect : AWS IOT, GOOGLE Cloud IoT, Microsoft AZURE IOT
Dimensions: 195 x 116 x 45 mm
Rack fittings are purchased separately

15.6 "Industrial laptop
I5-8265u Gen.8 (Option I7)
8GB RAM, Max.32GB (2400MHz DDR4)
256GB SSD (Option 512GB)
Audio In / Out, 2 Speakers
2 x USB 3.2 Gene 1 Type A
1 x USB 3.2 Gene 2 Type A (Max. 10Gbps)
1 x USB 3.2 Gen 2 type C (max. 10Gbps)
1 x SD Card (SDXC)
1x 10/100 / 1000bit RJ45
1 x VGA
1 x HDMI
1 x RS232 D-Sub, 9 Pin
1 x SIM Card Reader
1 x SmartCard Reader
WiFi
BT V5.0
Battery Li-Ion 7.4V, 7600mAh, approx. Up to 13.5 hours
Options: GPS, 4G LTE, HF RFID / NFC
373 (L) x 273 (W) x 29.5 (h) mm

Webcam built-in
IP5x

Elektronisk kalibreringsværktøj til MW-BEAM100

Microwave barierre, set with transmitter and receiver
Power supplied from 12 - 24VDC
Relay output NC (normal closed)