See which connector you need for your solution before you buy. See the list of the four antenna connectors beneath the picture. You are always welcome to contact us if you have any questions.
In this category you will find antennas that can be used to connect to your router. You will find a selection ranging from antennas for 4G routers to 2.4GHz.
There are 58 products.
Vulkaniseringstape/ isoleringsbånd til vandtætte samlinger, 19 mm x 5 meter
Outdoor 2.4GHz directional panel antenna 12 dBi
N she stick
Vertical spread is 28 degrees
Horizontal spread is 65 degrees
Wall bracket included
90 x 215 x 20mm
2.4GHz omnidirectional antenna
Gain: 8dBi
Plug: N female
Outdoors and indoors
Mast bracket included
360 degrees horizontal
10 degrees vertical
Temperature: -40 - +70°C
Length: 45cm
Vulkaniseringstape/ isoleringsbånd til vandtætte samlinger, 38 mm x 5 meter
Remaining stock
Outdoor Panel antenna, MIMO type
2 pcs. 11dBi omni antennas in the same housing
MIMO is the Multi-in, Multi-out principle
Vertical spread is 9 degrees
Horizontal spread is 90 degrees
Designed to minimize phasing of the radio signal
Mast strips included
2 x N female connector
Samleled til 2 antenner i ét, 3 x N (hunstik)
7 dBi mobilantenne på fod med 2 meter kabel og SMA han stik
Outdoor 5GHz Panel Antenna
Gain: 18dBi (16dB passive gain)
10 degrees radiation
Temperature: -40 - +70°C
Mast mount with tilt
Wall bracket with tilt
Dimensions: 27 x 21 cm
2.4GHz Panel antenna
Gain: 18dBi (16dB passive gain)
30/20 degree radiation
Plug: N-female
Mast mount with tilt
Dimensions: 27 x 21 cm
Beslag til montage af WiFi antenner
LTE 3G 2G GSM antenna on magnetic base
3.5 dBi
Waterproof - IP65 tight
SMA male connector (sleeve + pin)
3.5m cable
600 - 900 / 1700 - 2600
Dimensions: height 110 mm, foot diameter 30 mm
Access Point antenna for 2.4 / 5.8GHz
9 dBi High Gain
Indoors
Dual Band
Hard plastic - black
50 ohms
RP SMA male (brass) connector
Length: 39cm
Cracked joint
Steel whip antenna for Access Point
Magnetic foot
Dual Band 2.5GHz / 5.8GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
RP-SMA male / RSMA male connector
Dimensions: 150 mm, Ø30 mm foot
Converting cable from CRC9 to N
Suitable for connection of external antenna for router
RG174, 50 Ohm
100dB per 100meter at 2GHz
CRC9 male
N male
2 meters
Udendørs retningsbestemt panelantenne, 8 dBi
Vertikal spredning er 30 grader
Horisontal spredning er 75 grader
Vægbeslag medfølger
N hun stik
107 x 94 x 30mm
Vandal secure GSM dome dome antenna for hollow mounting
Quad band - 850/900/1800/1900 / 2170MHz
With 2.5 meters RG 174U cable - SMA he
ABS plastic - with rubber seal Ø47 x 15mm, M10 thread, 12mm
bandwidth ± 90/280 MHz
Gain 2,5dBi
vertical
Max wind speed 200km/h
Converting cable from CRC9 to N
Suitable for connection of external antenna for router
RG174, 50 Ohm
100dB per 100meter at 2GHz
CRC9 male
N male
5 meter
Tilbehør: 1 stk. justérbart beslag til WLAN-PANEL8 og 12
Outdoor directional panel antenna, 18 dBi
Vertical spread is 18 degrees
Horizontal spread is 35 degrees
Mast bracket included
N she stick
Dimensions: 290 x 209 x 35mm
GSM Antenna to 5 dBi
Magnetic
2.5M cable
SMA male connector
antenna, from the foot 23 cm
Operating temperature: -40 ° to + 85 °
Directional antenna - Yagi Type
2 bands 800-960 / 1700-2500MHz
angle: Horizontal 65 °, Vertical 55 °
11 DBI Outdoor logperiodisk
20 cm COAX cable with N- Type He
Dim: 446 x 210 x 65 mm
Weight: 900g
Max. Wind speed: 60 m / second
DC Ground - Transient Protection
Material: ABS
Masters with angle adjustment included
GSM 12dBi panel antenne med 1,8 m kabel mål 23 x 9 cm
Beslag / kit fastmontering af panel antenner
Sælges inkl. skruer i et sæt med 2 stk. kit
Rustfri stål
LTE Panel antenna, indoor/outdoor
2 x N-female connector
35° horizontal and 32° vertical radiation
IP67
Temperature: -20° ~ +75°C
Impedance, 50 ohms
Max power: 50 Watt
Frequency band: 698-806MHz / 824-894MHz / 925-960MHz / 1710-1885MHz / 1920-1980MHz / 2110-2170MHz / 2500-2690MHz
Dimensions: 473 x 252 mm
Weight: 1.4kg
Mast bracket included
Mounting bracket for omni antennas, double
For 50mm pipe diameter
4 pcs. pipe clamp
2 pcs. steel braces
4 pcs. nuts and washers
2 pcs. screws for fixing the antenna
