100 pc screw, black for racks, 6mm
Tilbehør til industrikabinetter og rackskabe
Subcategories
Tilbehør til industrikabinetter og rackskabe
Black nuts for cabinets and rack
Plug-in nuts for cabinets and racks
Dimensions: Footprint 13 x 12mm
Dimensions: Screw height 5mm
Dimensions: Clip height 10mm
Dimensions: Clip lock 8mm
Measurements: Plate thickness on post 2mm
Thread: M6
NOTE. Only 6mm nut with clip for RACK post - additional purchase if necessary. counterpart - RACK-SCREW
RACK screws and nuts for rack cabinet
Note: 6mm screws and nuts
RACK screw for rack cabinet
Note: 6mm screw - fits to RACK-NUT
19 "12U High Rack cabinets
glass front door
rear door of steel plate
Removable side panels
bottom and roof plate with ventilation holes
4 x 19 inch profiles with height declaration
Doors can be placed both Left and right-hanging
cable entry in top and bottom
front door, back door and side panels with locks
Delivered ready for use
Maximum load weight: 500 kg
fully removable
Maximum installation depth: ± 500 mm
600x600x635mm (BXDXH)
Black
Rack cabinets are shipped with freighter!
Black 19" rack cabinet at 12U
Wall mounting
Glasfront
Handles and lock for 635 x 600 x 600mm, built-in dimensions are 500 x 518mm
120 x 120 mm blæser, 12 VDC blæser med kuglelejer med termoregulering,
Supply Voltage 12 Vdc
Height 40mm
DC Operation DC
Width 40mm
Depth 20mm
Power Consumption 2.04W
Maximum Current 170mA
Air Flow 21.6m³/h
Dimensions 40 x 40 x 20mm
Noise Level 33dB
Fan Speed 9000rpm
Bearing Type CeraDyna C
Cooling fan 12V 0.40A
4-wire, 4-pin
90 x 90 x 25mm
Compact 12V LED strobe light with high visibility for security alarm systems
Cable Length 3m
Input 2-wire cable
Voltage 12V
Rated Current 120mA
Flashing Frequency 90/min
Power Consumption 1 Watt
Operating Temperature -50° C to +105° C
Operating Humidity 5% to 95% (Non-Condensing)
Dimensions Height 73.5mm, Diameter 45.5mm
Weight 110g
120 x 120 x 25mm.
Tachometer
Ball bearings
3-Pin
12VDC 4.8W
153m³/h
12 VDC fan with ball bearings
30 x 30 x10mm
22dBA or more
0.96W
8000 RPM max.
3pin Molex
40 x 40 x 10mm
12 VDC fan with ball bearings
6000rpm
25dB
Without thermoregulation
UL, CUL, TUV, CE
Molex connector
60 x 60 x 25 mm fan
12 VDC fan
0,15A / 1.8W power consumption
With ball bearings
With thermoregulation
3 pin / molex
80 x 80 x 15 mm
12 VDC fan
Ball bearings
Tachometer
0.95m³/min
34dB-A
7-13.8V
70m³/h, 35dBA, 1.7W
80x80x25 mm.
without thermoregulation
ball bearings
Fan
12 VDC
DELIVERED WITHOUT GRILL!
90 x 90 x 25 mm fan
built-in thermo sensor
Automatic speed control determined by temperature
12 VDC 3.12 watts
with ball bearings
3 pole with taco pulses for motherboard (yellow)
Molex 4 pole for ATX PSU 12VDC
ARCTIC F9 PWM - indsats med blæser
Outdoor 19" rack cabinet of 15 units
Double wall with 10 mm insulation
Option: 2 x Blower module with digital temperature gauge
External dimensions: 840x600x600 (H x BXD)
Maximum depth of equipment: 400 mm
The cabinet is delivered assembled.
RACK CABINETS ARE SENT BY CARRIER
19” rack cabinet, 15U high, 80cm deep, /m 2 doors
Dimensions: Height 860mm, width 600mm, height 800mm
Max. load is 800kg
Weight: 44kg
Removable sides, with key lock
Front and back door with lock
4 x wheels included
4 x adjustable feet included
Can be completely separated
RACK CABINETS WILL BE SENT BY CARRIER!
19" rack cabinet, 15U high, 60cm deep, for wall mounting
Sound-insulated 19” rack cabinet,
15U high
700 x 800 mm
RACK CABINETS WILL BE SENT BY CARRIER!
19" Sort patchpanel til 16 x RJ45, Cat 5e, UTP
glass door in the front
Back door made of sheet steel
Removable side panels
Bottom and top plate with ventilation holes
4 x 19 inch profile and with height indication
Doors can be fitted with both left and right opening
Cable entry at top and bottom
Front door, rear door and side panels equipped with locks
Delivered ready for use
Maximum load weight: 500 kg
Black
RACK CABINETS WILL BE SENT BY CARRIER! shipping surcharge, contact us for price
Pull out and flip up - Full operation of Server in rack
1U KVM LCD console with 19" screen (16: 9)
1 Ports KVM switch with USB, DVI
Drawer 1U for 19 "Rack mounting
19" 1080p screen, Nordic keyboard and TouchPad
On Screen Display
2 x USB
1 x DVI-D
1 Port: L 463 mm
Pull out and tilt up - Full operation of server in rack
1U KVM LCD console with 19 "screen (16: 9)
1 Ports KVM switch with USB, HDMI
Drawer 1U For 19 "Rack mounting
19" 1080p screen, Nordic keyboard and TouchPad
On Screen display
2 x USB
1 x HDMI
Dim - 1 port: L 463 mm
For rack mounting
1U drawer with 14 "Dual screen
DK keyboard
Touchpad
VGA
USB
Pull out and tilt up - Full operation of Server in rack
1U KVM LCD console with 19" screen (16:9)
1 port KVM switch with USB, DVI
Pull-out drawer 1U for 19” rack mounting
19” 1080p screen, DK keyboard and touchpad
On Screen Display
2 x USB
1 x DVI-D
Dimensions - 1 door: L 463 mm
Pull out and tilt up - Full operation of Server in rack
1U KVM LCD console with 19" screen (16:9)
1 port KVM switch with USB, HDMI
Pull-out drawer 1U for 19” rack mounting
19” 1080p screen, DK keyboard and touchpad
On Screen Display
2 x USB
1 x HDMI
Dimensions - 1 door: L 463 mm
SPECIAL PRICE. Expect highere price on future order
Drive tray with room for keyboard and with Trackball
PS / 2 for USB Adapter included
Buy USB keyboard: Key-Medio-B-U +
or buy PS/2 Keyboard: Key-Medio-B
See our monitors for rack with mounting chassis
Height: 1U 44.4 mm
1U 19" Rackmount
Support Mini-ITX M/B (Max. to 6.7" x 6.7")
For 1U Power Supply ATX max. depth 150mm
2x USB 2.0 in front
ON/OFF switch, RESET in front
Dimensions (W x H x D) 483 x 44 x 220mm
Til rackmontering
1U udtræksskuffe med 14" quad skærm
DK tastatur
Touch-Pad
VGA
USB
1U udtræksskuffe til KEY-MINI-TOUCH
Leveres uden tastatur
Justerbar dybde 520-900mm
Tilbehør til rackskabe
19 "temperature gauge with fan control of the 4 built-in fans
Suitable for regulating the temperature in rack cabinets
No speed control.
1U blæserindsats med 4 stk. blæsere til forbedring af luftcirkulationen i rackkabinet.
Front-afbryder til tænd og sluk af de 4 stk. blæsere
Ingen hastighedsregulering af blæserne
Temperature gauge with 2 x 230VAC outlet for fan control
230VAC outlets are ON/OFF
Instant fan speed
suitable for regulating the temperature in rack cabinet
Tilbehør til rackskabe. 1U høj blændplade
19" blindplader til afdækning
Cable holder for 19 "rack cabinet, black
Extraction shelf for mounting in 19 "Rack cabinet, black 1U
shelf Dimensions 482 x 550 x 44 mm (W x D x H)
80cm Distance rails and can be adjusted.
included: adjustable telescopic rails and screws for mounting in 19 "Rack cabinet
19” hylde udført i stål
1U
650 x 495 x 50mm (D x B x H)
Sort
Medfølger: Skruer, møtrikker til montering i 19" rackskab
Praktisk til løse enheder
Sort 19” hylde udført i stål
Praktisk til løse enheder
470 - 600 x 44 mm (1U) (D x H)
Medfølger: Lås med nøgle, justerbare teleskopskinner og skruer til montering i 19” rackskab
Web-based power rail with 2 x 230VAC outlets
2 x C13 sockets, 10A
100~240VAC C14, max 15A
Dimensions: 195 x 88 x 35 mm
Magnetically locked relay output - power saving
2 x Ethernet RJ45
2 x programmable button
Transient protection
Built-in timer
1 x Ammeter
VPN client
Cloud, MQTT etc.
Many useful functions
Supports: HTTP, HTTPS/SSL, TCP/IP, PPPOE, DHCP, DDNS, SNMP v3, SMTP, NTP, TLS.
Supports: Cloud Connect : AWS IOT, GOOGLE Cloud IoT, Microsoft AZURE IOT.
19" Rackmount Standard
Color: Black (Standard), Beige or Custom
System Boards: Pentium 4, Athlon 64
Support ATX M/B (Max. to 12" x 9.6")
Drive Capacity: 1x 3.5" HDD
Power Supply (Optional): 1U Single up to 300W ATX P/S (Rear Installation) Max. Depth 205mm
Cooling: 3x (80mm = 42.5CFM ea.) Fans
Connector Port (Front): 2x USB Ports
Expansion Slots (Optional): 3x Horizontal PCI Slots or
7x Low Profile PCI Slots
‧Indicators: LEDs for Power ON/OFF, LAN, HDD Activity
‧Switch: Power ON/OFF, System Reset
Dimensions (W x H x D): 483 x 88 x 357mm (19.0" x 3.5" x 14.1")
2.5 "Portable SATA SSD / HDD Tray
SATA I / II / III 6G Hard Drives & SSDs
Size: 2.5" (7-9.5mm Height)
Aluminum & amp; metal
DImm: 135 (L) x 102 (W) x 25 (H) mm
OS Support: Microsoft Windows XP / Vista / 7/8/10
20 stk. møtrikker til 19” rackskabe og industrikabinetter
20 stk. skruer til 19” rackskabe og industrikabinetter
24Vdc supply
Power 200 Watt PTC
-45 to 70℃
IP20 classification
40x47x114mm
DIN assembly 35mm
Max. 90% humidity
DELIVERED WITHOUT THERMOSTAT! Must be ordered alongside.
Outdoor 19" rack cabinet of 20 units
100 mm foot (plinth)
Double wall with 10 mm insulation
450 Watt cooler with digital temperature gauge
Option: can be supplied with a heating element.
External dimensions: 1900x600x600 (H x BXD)
Maximum depth of equipment: 400 mm
The cabinet is delivered assembled.
Negotiable in different heights
RACK CABINETS WILL BE SENT BY CARRIER!
With fans, two doors and two removable sides
RACK CABINETS sent by courier!
Glass door
rear dove of steel plate
Removable side panels
bottom and roof plate with ventilation holes
4 x 19 inch profiles with height indication
Doors can be placed both left and right-hanging
cable entry In top and bottom
front door, back door and side panels with locks
Delivered ready for use
Maximum load weight: 500 kg
fully removable
Maximum installation depth: ± 900 mm
19 "Black patch panel to 24 x RJ45, Cat 6, UTP
19" Patch panel til SC fiber
Patchpanel til 24 x RJ45 skærmede
Til netværk mellem Server, arbejdsstationer og WAN
RJ45 gennemgangsstik til montage af kabler på både front og bagside
Kabler monteres uden brug af værktøj
19" Patchpanel til LC fiber back-bone
Leveres uden LC-stik - skal tilkøbes
LC gennemgangsstik kan være: S-IND19"LC-M eller S-IND19"LC-S
19" Patchpanel til LC fiber back-bone
Leveres uden LC-stik - skal tilkøbes
LC gennemgangsstik kan være: S-IND19"LC-M eller S-IND19"LC-S
19" Patchpanel til SC fiber back-bone
Leveres uden SC-stik - skal tilkøbes
SC gennemgangsstik kan være: S-IND19"SC-M eller S-IND19"SC-S
19" Patchpanel til ST fiber
Sort 19" rackskab 24U høj, 60cm dyb
Soundproof 19" rack cabinet, 24U high, 88cm deep
2TB 2½ "hard disk in robust plastic housing
IP68 close - waterproof, shockproof
SuperSpeed USB3.0
USB cable included
Supports Windows XP / Vista / 7/8 / 8.1 / 10 Mac OS X 10.6 and subsequent
Powered through USB DC 5V
Operating temperature 5-50 ° C
Beige 19" 2U PC kabinet, 88 mm høj
Plads til 4 X PCI indstikskort
Støvfilter i frontlåge
Stik: PS/2 tastatur, 2 x USB på fronten
Plads til 1 x 5¼”/slim CD-rom drev og 1 x 3,5” eksternt, 1 x 3,5” internt
Medfølger: Skruer til drev og backplane montering
Black 19 ”Shelf made of steel
Practical for loose units
430 - 630 x 88 mm (2U) (d x h)
Supplied: Screws, nuts and fittings for mounting in 19" rack cabinet .
Max load: 25kg
Shelf for fixed mounting in 19 "rack cabinet, 80cm deep, black
Shelf for fixed mounting in 19 "Rack cabinet, black, 2U
Target: 485 x 300 x 88 mm (B x D x H)
max. Loading: 15kg
3 pin to 2 pin adapter with CB-32C connector
Connect 2 pin connections to standard 3 pin fan adapter.
Connect 2 pin connections to standard 3 pin fan adapter.
230 VAC Blæser til 19” rackskab
300 Watt PTC heating element for Temperature control
Has a built-in temperature limiter.
With fan - 45m3/hour
Supply voltage 230VAC
Screw terminals
Ambient temperature: -45 - +70°C
Dimensions: 225 x 110 x 80 mm
DIN bracket
Sort 19" rackskab 32U høj og 80cm dyb m/ aftage
Soundproof 19" rack cabinet, 36U high, 80cm deep w/ detachable door with lock.
Open frame 19" rack cabinet, 37U high, 50cm deep, w/ 2 brake wheels
Industrielt basiskabinet
2x USB 2.0 i fronten
2x store blæser
2x Udskiftelig støvfilter
Silver 19" 3U PC kabinet
132,6 mm høj
bundkort: Micro-ATX, ATX
Monterbar metalhåndtag
Black 3U fan module for 19" rack
With 3 x FAN
ON/OFF switch on the front
Sucks air out of the rack cabinet
For 230VAC - mains cable (IEC) included
Exchangeable filter on the back of the module.
Filter is inserted
Steel house
Black 3U fan module for 19" rack
With 3 x FAN
ON/OFF switch on the front
Blows air into the rack cabinet
Fan speed 2100-2300 rpm
Blower noise 33/35dBA
Fan dimensions 120x120x25
Max. air flow 55/63CFM
Uses AC and 0.08 A
For 230VAC - mains cable (IEC) included
Replaceable filter.
Filter is inserted
Steel house
3½" Bay med udtagelig skuffe.
Til 2½" HDD / SSD i skuffen
Add-on KVM Switch - 4 port with DVI.
KVM switch to S-IND19 "1U-S 1U Control bracket
modular and found in 2 sizes
is an integrated part of drag-out operating console
multi-cable between console and sqm making that sqm is stationary
metal cabinet with DVI and USB B connector
purchase DVI cables and USB cables - multiple lengths
It is 8 ports sqm as shown - Same size, only 4 ports
Web-based remote control of switching on/off via the Internet
Built-in Web Server. Username + Password
MQTT, Cloud, SNMP
APP for Smartphone
Watchdog with ping of stable website (Google etc.)
4 x 230 VAC sockets - IEC C-13 output 10A and C-14 input 15A.
Web server built-in - password-protected.
VPN Client
Supports: HTTP, HTTPS/SSL, TCP/IP, PPPOE, DHCP, DDNS, SNMP v3, SMTP, NTP, TLS
Supports: Cloud Connect : AWS IOT, GOOGLE Cloud IoT, Microsoft AZURE IOT
Dimensions: 195 x 116 x 45 mm
Rack fittings are purchased separately
Compact converter for current measurement and data conversion for IP monitoring systems
Input Terminal Plug 2pins 5mm
Output Terminals RJ11 / RJ12
Power Consumption 100 mW
Dimensions 60×18×18 Mm
Weight 60 g
AT switch to PCs with AT power supply to 4-pole rocker switch to 13 x 19mm
N / OFF 250VAC 6A AT Switch
Load control with on/off and restart options for up to 4 outlets
Built-in temperature sensor
Supports connection of 2 additional sensors and 2 dry contacts
Integration with two 12V devices, such as alarm beacons
Compatibility with USB camera
Option for built-in LTE modem
Dimensions (L x W x H) in mm: 440x44x80
Black 19" server rack cabinet of 42U
2 doors and 2 removable sides
Glass front
Handle and lock
The cabinet has 4 wheels, but can be locked in a fixed position with 4 adjustable feet
2000 x 600 x 1000 mm
Top-mounted fan can be purchased additionally
42U server cabinet
600 x 800 x 2000 mm (WxDxH)
Glass door on the front
removable side panels
Bottom and top plate with ventilation holes
Door can be mounted on the right and left side
cable entry on the bottom and top of the cabinet
front door, back door and side panels with locks
Max. weight 500 kg
Max installation depth: 700mm
RACK CABINETS WILL BE SENT BY CARRIER!
Outdoor 19 "rack cabinet at 42 unit
gun with lock
Space for 1 layer batteries (dimensions: 300 x 650 x 50 mm) Double
top panel dimensions: 735mm x 600mm x 1700mm
temperature: -40 to +55 ℃ ℃
racks sent by courier:
42H black
600mm x 600mm (W x D) external size
Glass front door
Back door made of sheet steel
Removable side panels
Bottom and top plate with ventilation holes
4 x 19 inch profile and with height indication
Doors can be fitted with both left and right opening
Cable entry at top and bottom
Front door, rear door and side panels equipped with locks
Delivered ready for use
Maximum load weight: 500 kg
82KG
DELIVERED ON PALLET contact us regarding shipping price!
42U security cabinet
Single door
3 shelves
Dimensions: 1900 x 750 x 500 mm (HxWxD)
4 mm steel plate for SSF3492 approved as well as Skafor (color blue)
To storage of valuables, weapons or similar
Locks and explosion protected
Adjustable security key lock (incl. 2 keys)
228 kg
Gray
Soundproof 19" rack cabinet, 45U high, 80cm deep
19 "4U ATX cabinet
3x 51/4 approach from front
1x 3.5" Approx from front
4 x 3½ "Internal
1x Slim DVD space Front
PS / 2 ATX Place
USB 3.0 Front
room for 7 full height and full-length card
1x 120mm blows in front PWM
12.5kg
563.7 x 430.0 x 176.0 (mm) with front
19” 4U ATX kabinet. Til montering i 19” rack, med blæser og udskifteligt støvfilter
19" 4U ATX chassis
Industrial cabinet with fan and replaceable dust filter
482 x 177 x 450 (WxHxD)
19” 4U OEM kabinet med ekstra dybde. Til montering i 19” rack, med blæsere og udskifteligt støvfilter
19” 4U ATX kabinet med ekstra dybde. Til montering i 19” rack, med blæsere og udskifteligt støvfilter
19” rackskab, 4U højt, 45cm dybt, til vægmontage
Pc kabinet til vægmontage
Plads til 5 stk. fuldlængde indstikskort + CPU kort
19" blindplader til afdækning
4U pc kabinet til vægmontage
Industrikabinet til ATX-bundkort eller fuldlængde CPU kort