We have a very large selection of load cells for tension and compression, torque measurement for steady and rotating items.
There are load cells in many designs and weight classes. Contact our sales personnel for guidance and prices. Do you have special requirements we will be happy to look into this. We can also offer load cells for projects.
Note: It is a very small selection you will find on our website ..
Subcategories
There are 46 products.
Top-class load cell - proven construction
Available in weight classes from 1.1 - 223Kn (100kg - 22 ton)
proprietary interface Temperature compensated strain Gauges
Performance for 0.03%
eccentric load compensated
Low deflection
0.0008% / ° F (0.0015% / ° C) temp. Effect on output
Barometric Compensation
Shunt calibration
E74 NIST trackable voltage and compression calibration (optional)
3-axis - ForceX, ForceY, ForceZ Load cell
3 x Strain Gauge Bridges
Series from 10n to 500 KN Power Area
Current model is for 120kN
Compact Size
Low Cross Talk
mV/V output
Temperature compensated
Made in Aluminum - De-stressed material
3-axis Load cell with 3 outlets
simultaneous measurement of pressure and torque perpendicular to the pressure axis
Pressure axis works according to the same specifications Standard model
pressure stiffness and torque stiffness are both very high due to the Low Profile construction.
Explosion-proof Load Cell
EX certified - hermetically sealed
load cells for tension and compression, 2 ton
Suitable for the oil industry and the like.
Loop-powered with 4-20mA outputs signal
Precision: 0.05%
Mini button cell for pressure measurement - sealed.
Available in 8 weight classes
superior to any other button cell
integrated temperature compensation
Improved eccentric load rejection
multi-point calibration
integrated loading button
Small diameter
environmental supplies
heat-treated stainless steel
Standard cell m / M8 x 1.25 gevind; Full load = 20 Kg
Tryck cellrad m / M20 x 1,5 gänga; Full belastning = 1000 kg
Load cell for tension - button cell model
capacities from 0.01 KN to 100 kN (2.25 LBF to 22.5K LBF)
Overload protected
Temperature compensated
small diameter
Environmental sealed IP60 or IP65
Stainless Steel
16-bit strain gauge / weighing bridge amplifier - datalogger
With temperature compensation
Excitation sense 2.5VDC
Bridge input: +/- 8mV Version: 16mV and 32mV
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc.: Software to configure, download, plotting, analysis and an alarm (not supplied)
Configurable alarm controls
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
S-type load cell
impedance input: 410 ohm
Iimpedance output: 350 ohms
Exitation: 10 - 15V
4-wire
Thread in top and bottom: M8 x 1 , 25 mM
Full load = 100kg
Overload: max. 150%
Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg
Load Cell for measuring torque on axle
can sit between power source and load
suitable for measuring electric cars etc.
capacity from 100Nm to 10kNm
simultaneous voltage and frequency on the output
Option with digital output via USB
Order required max. power and output format
Load Cell series for the hard environment
the series is from 12.5n to 445Kn
current model is to 111Kn
Temperature compensated Strain Gauge
%FS: 0.03% High Output: 4mV/V For high accuracy
very low Deflection
made of stainless steel
Hermetical environmental sealed
Weigh-pin to shackle or the like. For crane etc.
Designed pins or bolts for a load
stainless steel
used with fork arms or shafts to monitor loads
capacity up to 3.000k lbf. (1,360 MT)
custom Designs
Get Offer on This Product
Mechanical dimensions and Weight Need
