Switch

2 port mechanical switch to VGA
Max. Resolution 2048x1536
Push buttons on front
1 x i/o - vga female
2 x A/B - VGA female
Works both ways
Recommended only for test use
Remember! there is no screen emulation as it is mechanical!

2-port KVM switch
1 x DVI 1.0 inch (from each PC)
1 x USB BM 2.0 (from each PC)
3 x USB 2.0 for mouse and keyboard on the control side
Sound in and out
EDID support
Resolution up to 3840x2160 @ 30HZ (NOTE 30HZ!)
Change from button on the front
Cables must be purchased, available in several lengths
Can function as a DVI or USB switch, requires supplied power supply

Connect up to 5 PCs or HDMI sources to 1 monitor
Remote control included
Switching with push button or remote control for HDMI 1.4 and HDCP 1.2
Resolution up to 1080i / 1080p
Power supply included 5VDC / 1.2A

Automatic VGA choice between two PCs.
Automatically switches to the input with the highest priority
Priority selected by switch
With EDID emulation
Resolution up to 1920 x 1440

Remote switch for 2 PCs and 1 HDMI monitor.
Button on the front or remote control can be used to select the PC input.

Automatic VGA choice between two PCs.
Switches to input the selected priority
Slide Switch to the priority choice
Resolution up to 1920 x 1440 points
Up to 65 meters from the box to the monitor

Ideel til undervisningsbrug, hvor flere pc’er skal tilsluttes en projektor eller skærm

Composite Video Switch
8 Input BNC Hier to 1 Output BNC He
Supports lower power consumption at full load below 500 mA
AC / DC Adapter- 12 VDC, 300 mA
Video Distortion: 0 .5 DB
Remote control IR
for wall mounting
175 x 81 x 25 mm

4K@60Hz 4 to 4 HDMI MATRIX. Video crossover
4 x HDMI 2.0 up to 4K @ 60Hz (YUV4:4:4)
Supports 3D video and HDR10
Bandwidth up to 18 GBPS
HDCP 1.4/2.2 input and output
4 X HDMI inputs
4 X HDMI outputs
4 X SPDIF audio outputs for amplifier - Dolby
Choose any input for any output
Front-operated, via IR, RS232, IP control, WEB GUI control
USB port for FW update
Dimensions: 216 x 105 x 34 mm
Operating temperature: -5 - +45°C

Mix HDMI video from 2 sources of 1 screen
PIP image in image
PBP image in picture
Screen layout (lock) function
Multi-format 2 in 1 out-switch
2-channel HDMI Video Swappable
Scales Resolution Up or Down
Up to 4K UHD (3840 x 2160 @ 30Hz, 4: 4: 4)
Audio out as Analog and Toslink SPDIF
Supports more than 40 Presets
Complete Video Control of Brightness, Contrast, Saturation, Tint, etc
OSD / IR / Button / Serial Interface
HDCP Compatible, 3D Video and Blu-Ray
Plug-N Play - System, No Software Installation
Supply: 12VDC

Perfect table box to the meeting room for viewing on a large screen
can be mounted under the table
6 x video inputs selected for 1 x output
4 x HDMI input
1 x DisplayPort
1 x VGA + audio
1 x HDMI output for local monitor
1 x RJ45 for remote receiver with HDMI out (extras)
Sending of CAT6a cable up to 100m in HD 1080p
4K UHD (3840 x 2160) up to 70m
Front panel push button and IR remote control or serial or GUI control
EDID and HDCP function
USB 2.0 port for Pass Through
Size: 135 x 100 x 40 mm

4 x HDMI inputs to 4 x HDMI outputs
Viewing the screens 4 are summarized on a screen
display screen 1 distributed over 4 skærme
Can used with DVI adapters

DP manual switch with pushbuttons.
Wall mountable.
Plastic cabinet.
2 ports (1 x In / Out, 2 x Switch).
40x26.5x42.5mm.

300 MHz (-3 dB) RGB video bandwidth
Compatible with VGA-QXGA and HDTV component video signals
Buffered throughput for input 1
ID bits from inputs 1 and 2 are routed to the output
Auto-input switching
Contact closing of remote control
REFURBISHED!

VGA and Audio Matrix, 2 in 4 out
2 x VGA inputs to 4 x VGA outputs
All inputs can be routed out of outputs
Possibility of scanning
Remote control included
Can be operated from the front
Resolution up to 1920 x 1440 points
AC adapter included

HDMI Matrix over IP.
Video Wall configuration
Setup with DIP switches (TX-RX Pair)
Max 24 transmitters and 96 receivers (contact us for buying TX or RX units separately.) < br> HDMI 1.3, HDCP 1.3.
HDMI loop out to the local monitor
Resolution 1080p @ 60/50/30/25 / 24Hz, 720p @ 60 / 50Hz.
point to point over Cat 6. Maximum . 100meter. Point to many Hotels can be supplied via PoE (802.3af) or 12VDC 1A (PSU included).
Power Consumption: 2.5W.
Switch must support protocol: IGMP Snooping or IFMP.
Delay: 120ms
Operating temperature: 0 ~ 40 ° C.

4 ports mechanical switch to the VGA Printing Front-
1 x I / O - VGA female to 4 x A / B / C / D - VGA
she works both ways
recommended only for test use

Choose one of five HDMI signal input sources and send to a HDMI display.
manually or with the remote control to select the input signals.
30 / 36bit color depth.
Supports High Definition Audio: Dolby TrueHD, DTS-HD Master Audio
Auto signal enhancement feature can improve signal quality after long distance transmission
resolution up to 4K @ 30Hz
Supports 3D
Transferring CEC
Dimensions: 115 x 62 x 25 mm
Power supply: 5VDC / 1A supplied

Controller / video wall / splitter
Input: 1x Display Port, 1x HDMI + 1 Loopout, 1x DVI
Output: 4x HDMI
Supports HDMI, DVI, Display Port, VGA and YPbPr signals
4K / 2K HDMI
4K image split in 4 x HDMI outputs
PIP (picture in picture) and POP (side by side) multi function
HDMI audio
Supports YPbPr video via VGA input port as well as DVI-D, VGA & amp; HDMI by DVI-I input port
High end 3D motion
Managing via remote or RS232port

HDMI, HDCP and DVI compatible 32 x 32 MATRIX
Modular - input and output modules
Input and output modules can be mixed and added to 8 × 8 input module and output module
4 input and 4 output modules with HDMI, DVI
VGA module is only input
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA
480i to 1080p and 4K2K @ 24/25/30 Hz
Control of the matrix via the front panel, RS-232, Telnet, WebGUI controls
10 available preset settings
3 EDID modes: Standard, Dynamic and Manuel
Power supply with redundancy
HDMI cable up to 15 m
HDbaset 5Play ™ convergence support HD video, HD audio, PoC
Ethernet and IR / RS-232 control