6 ports switch 10/100 RJ45 Redundant PSU - Unmanaged, 9-30VDC
Unmanaged 6 ports industriswitch
6 x RJ45 10/100Mbit
Redundant PSU input.
DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication...
DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication devices that allow data communication between different network devices locally and the World Wide.
The network switch handles the flow of data across a network, also called back bone, by only sending a received network packet to the one or more devices to which the package is intended.
Each network device connected to a switch can be identified using the network address, the IP address, so that the switch can control the flow of traffic that maximizes network security and efficiency.
There are 2 basic versions of Ethernet switches, the simple ones -managed switches that route data to the ports that the telegrams want. The more advanced Ethernet switches are "managed" switches, where there are a lot of setup options to control and optimize the data flow and, not least, increase data security, also in the context of cyber crime protection. A switch can be built up with up to 7 "layers" which each have their task. For example, layer 3 is for controlling IP multicast (IGMP snooping - for example, video distribution), some router functions, IP routing at VLAN configuration.
The network switch is found everywhere and plays an integrated role in most modern Ethernet local area networks (LANs). Medium and large networks contain a number of managed switches. Small and small systems typically use an un-managed switch or the LAN ports that an Intenet Router is equipped with.
An Ethernet switch can be for both PDS cables (RJ45 cables) and optical fiber cables and many Equipped with ports for both cables.
DANBIT offers a host of different network switches, ranging from PoE Switch to industrial 24-port managed switch with built-in SFP ports. See the great selection here.
There are 86 products.
Unmanaged 6 ports industriswitch
6 x RJ45 10/100Mbit
Redundant PSU input.
16 RJ45 Ethernet ports
10/100/1000 Mbps with auto-adjusting MDI/MDI-X
DIN-rail and wall-mounting
Metal enclosure rated at IP30
Dual power input for redundancy
8K MAC address table
Working tempeture -40 to 75 C degrees
12 to 48VDC input
PASSIVE PoE means that the switch supply voltage is on the 4 PSE ports
only used for PoE 802.3af / at PD equipment but ONLY with 48-55VDC supply voltage to the switch
5 port 10 / 100Mbit Switch with 4 PoE ports
4 x PoE RJ45 PASSIVE PoE
1 x RJ45 Uplink
48Watt per PASSIVE PoE port
Supply voltage: 12V DC - 55V
4 port PoE pass through - 10/100/1000Mbit
1 x RJ45 PoE in (data + PoE++) - 95 Watt
Mid-span and End-span
4 x RJ45 PoE out (data + PoE+) - 30 Watt
PoE out pin: +1/2, -3/6
PoE output power, total is max. 75 Watt
PoE input voltage 50 - 57VDC
Temperature: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
Your bracket
RJ45 Cat 5e / 6a
Wall installation to 8-conductor (8P8C)
TIA-568A / B colored Heating installation
No tools are needed, easy installation
Compact 5 port Ethernet switch for 100Mbps
Not Managed
Very economical: max. 2 Watt
Supply voltage: 12 - 48VDC
Can also be powered with 24VDC
With redundant voltage input
Dimensions: 104 x 70 x 30 mm
Weight: 255 grams
IP30, metal housing
DIN bracket