External accessories for PC upgrades or more functions. We have a large selection of hard drives, memory cards, adapters and expansion cards. Here you can buy loose accessories for more specific solutions. See our subcategories to find the right accessories to what you need, otherwise you are more than welcome to contact our sales department.
Subcategories
There are 160 products.
PCIE to mini PCIE converter w/SIM card socket
3½” floppy to floppy drive
Formatted to 1.44 MB
The price is per. 1 piece. floppy disk
Get a quote if they need to be formatted to 720kB
8GB SLC Industriel flash til SATA, lodret montering
USB 2.0, USB 1.1
Power from USB or AC / DC power adapter
read and write to PCMCIA hard disk, ATA Flash. DOES NOT READ SPECIAL CARDS!
read and write to CF-I, CF-II Smart Memory, Memory Stick, Micro Drive, Multimedia Card, Secure Digital Card and XD
Card use of additional Flash adapter.
Complete Plug and Play
USB Bootable from PCMCIA hard drive (depending on system BIOS support)
Serial ATA bootable from PCMCIA hard drive
Up to 480 Mbit/sec (60 MB/sec) data transfer* for USB 2.0, 10 times the speed of USB 1.1
Up to 1500 Mbit / second (150 MB / sec) data transfer to eSATA
USB version works under Windows 98SE, Me, 2000, XP, 7, 2003, Windows 10
Note! Certain cards are not supported Memory card and Verifone card. Buy the cards together with the reader to be sure!
Will not be returned because card cannot be read. Send any short, then we test whether the reader can read them.
IDE 40 pin to SATA adapter
Mobil SD/ Micro SD kortlæser til Smartphones. Transportabel kortlæser OTG (On The Go) til Smartphones
Mobil SD/ Micro SD kortlæser til Smartphones. Transportabel kortlæser OTG (On The Go) til Smartphones
Vibrationsdæmper til HDD, 2,5 "
Vibrationsdæmper til HDD, 2,5 "
Bootable flash disk for CPU card with DOC socket.
DiskOnFlash modules for 2½” IDE interface
Hard disk for direct connection on the IDE interface. No drivers required.
Disk drives, DVD ± RW (± R DL) / DVD-RAM, 8x / 8x / 5x, USB 2.0, external
128MB Compact Flash for Industrial Use
Card Reader 8-In-One USB 3.0 Bus Powered.
2 x SD and 2 x Micro SD available
SDHC/Micro SDHC to SDHC/Micro SDHC
Compliant with the USB2.0 / 1.1 specification
Support CompactFlash Ultra DMA mode 6
Supports major memory cards including the SDXC
Plug & play simplicity
Auto detect card memory
support USB3.0 Ultra Hi speed transfer 100MB/s
Support 5Gbps Super SpeedU / 480Mbps high speed and full speed transfer rates
Supports bus powered modes
USB3 for SATA 7 + 15 pin adapter cable for SATA2.5 / 3.5 "HDD
Plug & Play and Hot Swap
Used for 2.5" SATA HDD / SSD, 3.5 "SATA HDD (use 12v DC PSU)
Supports: WIN XP, Vista / 7/8 / 8.1 / 10 and Mac
new!
Last in stock
is eol
USB3.0 til IDE/SATA adapter
Til 2½" og 3½" HDD og SSD
Inkl USB3.0 kabel (USB A han til USB B han, 1,2 m)
LED indikator
ON/OFF knap
Forsyning: 12V, 2A
U.2 SFF-8639 NVME / SATA 22 PIN for 1 x M.2 Convert
1 x U.2 SFF-8639 Han connector
1 x SATA 6 GB / S 22 Pin
1 X 67 Pin M.2
SATA / PCIE slot
NVME M.2 can only be used with U.2 SFF-8639 Port
SATA M.2 can only be used with SATA Port
Form factor 2.5"
SATA with backwards compatibility to SATA Rev. 2.0 (3Gb/s)Capacities2120GB
NAND3D
Power Consumption0.195W Idle / 0.279W Avg / 0.642W (MAX) Read / 1.535W (MAX) WriteStorage
temperature -40°C~85°C Operating temperature0°C~70°C
Dimensions 100.0mm x 69.9mm x 7.0mm (2.5”)
Weight 39g (120GB – 2.5”
Vibration operating 2.17G Peak (7–800Hz)
Vibration non-operating
20G Peak (10–2000Hz)
Supports both NVMe and SATA B+M Key (See photo for exact pin layout)
Heat sink for NVMe SSD
USB-C to USB-A and USB-C to USB-C cables included
USB3.1 Gen 2 Type-C on housing
Dimensions: 102x27x11mm
Windows / Mac OS / Linux
1x Source port, 9x Target port
Speed of up to 2 GB per minute (33 MB/s) per port
USB 1.1/2.0/3.0 support
Tested with capacities up to 18 TB
Quick Copy: FAT16/32, exFAT, NTFS, Linux (Ext2/Ext3/Ext4), MAC (HFS, HFSX, HFS+)
Dimensions 17 x 25 x 15 cm
