Remote control/Measurement/Alarm via GSM

GSM controllers in this group are well suited for remote monitoring and control of facilities for mobile network equipment, vehicle monitoring, environmental monitoring and food control, etc.

GSM remote monitoring works over the mobile network . They use 2G and 3G (phase out), GPRS and 4G (LTE) and 5G. GSM controllers are not only used in places without Ethernet connection, but where the connection via the mobile network is...

GSM controllers in this group are well suited for remote monitoring and control of facilities for mobile network equipment, vehicle monitoring, environmental monitoring and food control, etc.

GSM remote monitoring works over the mobile network . They use 2G and 3G (phase out), GPRS and 4G (LTE) and 5G. GSM controllers are not only used in places without Ethernet connection, but where the connection via the mobile network is mandatory. Several GSM controllers have a built-in WEB server for easy setup, and do not need a special software. Some GSM controllers have MTM protocols such as HTTP record with XML / JSON status files, and HTTP API commands and both data collector and remote control, although they do not have public static IP address.

Some GSM controllers are set up using SMS commands. Some support email client with TLS encryption to send email alert under alarm conditions. Along with emails, the warning can also be sent as standard SMS. GSM controllers have standard analog inputs for DC voltage measurements, as well as digital inputs for contact monitoring and several have 1-Wire interface that supports up to 8 sensors.
Relays can be activated either remotely via SMS or HTTP API or locally.

HTTP content can be sent periodically or at previously set alarm conditions. This is very useful in client-server systems for GSM GPRS remote monitoring and control as part of SCADA computer systems.

Remote control, measurement and alarm via GSM - DANBIT

Remote control/Measurement/Alarm via GSM

There are 33 products.

Showing 1-25 of 33 item(s)

Active filters

Server room monitoring in...

Server room monitoring in real time Temperature, Humidity, Voltage, Smoke, Air, Digital I/O, WEB interface 4G

CPU: 720Mhz/ 4 Core/2GB/Linux v.5.10
10/100 ethernet connection
2 x USB to USB camera, USB FLASH, USB HUb
8 x Analog ports
32 x Digital inputs
8 x Isolated digital outputs max. 24Vdc, 15mA
2 x Relay (NC NO COM) max. 10A for AC, 9~30V for DC voltage
LTE slot modem (modem purchased separately)
1 x Audio-Video output & input
SBNP v1, v2c, v3
OpenVPN, SSL, HTTPS
DHCP, HTTP, DynDNS, SMTP, RADIUS, Syslog, NTP server, HTTP request
API
Notification E-mail, phone call, SNMP, WEB to SMS, SMS Link
Logging SD, USB Flash, E-mail, FTP
power supplies single/redundant 24-48Vdc, 230Vac (contact sales regarding versions)

Price Call for price
Product code: REMOTE-MON
On the way in  
  • 1-wire temperature and...

    1-wire temperature and humidity sensor, -20 - + 60 ° C, 10 - 90% RH, 1 meter cable

    1-wire communications - several sensors can be connected to the same unit
    ± 3.0% relative humidity accuracy
    ± 0.4% relative temperature accuracy
    12 bit resolution for humidity measurement
    14 bit resolution for temperature measurement
    Calibrated digital output
    Eksellent long-term stability
    Each sensor has its own unique 64-bit serial number

    Price 625.00 DKK
    Product code: TSH202
    Physically in stock  
  • 8dBi LTE Omni antenna, 700...

    8dBi LTE Omni antenna, 700 - 2700MHz. Dome for hole mounting. 1.5 meter cable with SMA male. Vandal safe

    Vandal-proof and waterproof dome antenna
    The LTE band 700-2700MHz (including GSM, 3G and 4G)
    VSWR: <=1.5
    Passive gain: 7-8 dBi
    Polarization: Vertical
    Nominal power: 50W
    Input impedance: 50 Ohm
    Cable length: 1.5 meters
    Cable type: RG174
    Connector type: SMA male
    Weight of antenna: 57g
    360° Omnidirectional
    Center hole mounting

    Price 980.00 DKK
    Product code: GSM-ANTOMNI8-LTE
    Physically in stock  
  • GSM alarm with SMS. Battery...

    GSM alarm with SMS. Battery backup. 2 x Digital inputs, 2 x Relay outputs. 3G/4G. 9 - 36VDC

    GSM/3G/4G LTE
    2 x digital input, compatible dry contact and wet contact, supports EOL connection;
    2 x relay outputs (240VAC@3A)
    One relay output can be switched on/off by sending an SMS text
    The second relay output can be switched on for 4 minutes if inputs are activated
    Supports input status recovery, external power failure alarm via SMS texts
    Must be programmed with USB cable to PC
    9~36VDC supply voltage and power source output for external device
    Up to 3 users can receive alarm and daily report SMS
    Up to 5 users can receive alarm calls;
    Free SMS APP
    Rechargeable backup battery and power monitoring alarm
    Metal housing, IP30
    Operating temperature: -10 - +70°C
    Dimensions: 70 x 88 x 30 mm
    Wall installation and DIN
    Whip antenna with magnetic base 3m cable included

    Price 1,422.00 DKK
    Product code: GSM-ALARM130-K
    Physically in stock