1 port serial port server via Single Mode fiber, RS232 / RS422 / RS485, up to 30km. Korenix JETPORT 5601F-S
External COM port via Ethernet and Internet - for fiber cable network switch
Device server with single mode fiber and RS232 / 422/485 port
REMAINDER SALE
1 port compact 10/100 TX to 100FX media converter
LLF color detection technique
Compliance with IEEE 802.3 / IEEE 802.3u standards /
IEEE 802.3x standards
Supports 19" 3U 16 slots chassis mounting, Rack-1001/1002
JetCon 1501T 10 / 100Base-TX to 100Base-FX, ST connector,
Multi-mode 2KM
Limited stock!
The JetCon 1501 Fast Ethernet Media Converter series is designed to convert 10 / 100Base TX signals to 100Base-FX signals. They extend the connection range of the Ethernet device to send & receive data via fiber cable without performance degradation. The JetCon 1501 series uses store-and-forward technology in the switching converter. They will filter out abnormal packets to keep network performance, support data forwarding. rate up to 148810 pps at full wire speed. The JetCon 1501 series supports automatic negotiation & amp; amp; flow control for 10/100 Mbps connection. With the Loss Forwarding technology, the JetCon1501 can detect the broken connection on the RJ-45 port and immediately terminate the disconnection on the fiber port. The JetCon 1501 also has diagnostic LEDs that show power, link, speed and activity so you can quickly detect and correct network problems.
External COM port via Ethernet and Internet - for fiber cable network switch
Device server with single mode fiber and RS232 / 422/485 port
REMAINDER SALE
JetCard 1404i 4 x isolated RS422-485
With 2 KV optical isolation
US SUPPORT
Windows 98/Me/NT/2000/XP/2003, Win 7 32bit
Linux RedHat Enterprise 4.0 (2.6.9)/RedHat Enterprise 3.0 (2.4.21)
RedHat 9.0 (2.4.20)/RedHat 8.0 (2.4.18)/RedHat 7.3 (2.4.18)
RedHat 7.2 (2.4.7)/FC5(2.6.16)/FC3(2.6.9)/ FC2(2.6.5)/FC1(2.4.22)
Mandrake 10.1(2.6.8)/Mandrake 9.2 (2.4.22) Regulat
Network module with digital I / O Korenix JETI / O 6550
Channels: 14/8
Digital inputs: 14 pcs., Logic 0: 0 - 4 V, Logic 1: 5 - 30V
Digital outputs: & nbsp; 8 pcs. Open collector, 5 - 40 V 250mA
Isolation: Optical 2500 VRMS for analog and digital inputs and outputs for the power supply
Magnetic 1500 V from the network interface for the power supply
10/100 Mbit m / RJ45 their connector
Operating temperature: - 25 ° C - 70 ° C
Supports Modbus / TCP, OPC server, SNMP. Software included for configuration
For DIN rail mounting
Supply: 10 - 30 VDC via terminal block, Max 1.92 W
Unmanaged 8 x 10/100Mbit switch
Power redundancy
Broadcast storm packet filter
Event alarm
Dual DC10~48V power inputs
Aluminum case with IP31 grade protection
Operating temperature -25~70oC