NTP Server - Atomic clock receives the time from DCF77 in Frankfurt. Extremely accurate time synchronization of Servers / PCs.

NTP Server - Atomic clock for 19 rack mounting.
Signal from DCF77 in Frankfurt (77.5kHz).
Rod antenna with 5 meter cable with BNC male
Additional antenna cable 50 ohm, BNC male/male
Purchase BNC-SAMLE
With network port and serial port
1U for rack mounting
Power is supplied from 230VAC.

ATOMUR-PRO19"
12,579.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

ATOMUR-PRO19 has an external antenna and can be used in places where there are otherwise problems with receiving the signal. ATOMUR-PRO19 can be installed as an SNTP server so that Servers/Clients can retrieve the time via the network. All models receive the DCF77 radio signal at 77.5 KHz from Frankfurt. The range is approx. 2000 km.
Connects to a serial port 9600 bps or network port 10/100 Mbit
Shows time and date on a display as well as reception conditions using a series of LEDs.
Power supply: Has a built-in 230 VAC power supply
Distance from receiver to PC: Can be extended on the BNC connector (antenna port) by up to 2 x K-ATOMUR+50 (RG174U cable á 50 m, 50 ohm) – a total of 100 m.
Software: Windows 2000, XP, 2003, Vista 32/64 and Win 7 as well as Linux using the serial port.

Forsyning
har indbygget 230 VAC strømforsyning
Tilslutning
Tilsluttes en seriel port 9600 bps eller netværksport 10/100 Mbit

4 other products in the same category:

ETH remote control over...

ETH remote control over network. 4 x on / off outputs, 12 x passive input, 4 x RJ45

The ideal choice for Server Room and Server rack monitoring.
4 x potential-free switching relay outputs - 36VDC / 3A switches
Large LED display for power measurement, IP address, sensor data and error reports
4 x Watchdog for monitoring connected PCs (ICMP / TCP)
12 x passive signal inputs - (contact inputs) for Phoenix plugs
4 x RJ45 for temperature / humidity sensors. RS232 / 485, 1 x RJ45 for LAN
Features, limit values, alarm receivers set up on the device via supplied software
2 x 12VDC power supply inputs (redundant)
PoE - Power over Ethernet for 2111-2 the model.
Free APP for Android and iPhone
SNMP Get / Traps (SNMPv1, v2c, v3)

Price 4,498.00 DKK
Product code: ETH-TEMP-2111
On the way in  
Quick view
Atomic clock, GPS...

Atomic clock, GPS controlled time server NTP Server Network. Dual LAN with TCXO

Atomur- controlled GPS time server to the network 32
channel receiver which reduces the risk of signal loss
TCXO (Temperature Compensated X-tal Oscillator) in order to keep the time in the absence of GPS signal
10 / 100BaseT redundantly Ethernet
Low power consumption only 7W
230VAC 50-60Hz 0.1A
Operating temperature 0 to 50 °
Supplied with multi-antenna, wall mount and 30 m RG58 aerial cable

Price 20,244.00 DKK
Product code: ATOMUR-SAT-TRD+
On the way in  
Quick view
Manuel bypass-switch, 6 x...

Manuel bypass-switch, 6 x IEC C13 10A, 1 x IEC C19 16A,

Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C19, 16A 
1 input „von USV“ IEC C20, 16A 
6 x IEC C13 udgange 10A 
1 x IEC C20 16A  Strømforsyning
Lavt internt strømforbrug

Price 3,282.00 DKK
Product code: SW-BPASS6+
On the way in  
Quick view
PDU with power measurement...

PDU with power measurement via network, residual current, 4x Schuko and 16x IEC C13, up to 10/16A, external sensor input

20 ports PDU with individual and total power meters via network
Integrated residual current measurement type A
User interface via web browser with Password
16 x IEC C13 outputs 10A
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support

Price Call for price
Product code: S-IND19"230V20+
On the way in  
Quick view