2-channel duplex or 4-channel simplex fiber optic bypass switch
Fiber speeds 100 Gbps/40 Gbps/10 Gbps/1 Gbps/100 Mbps
Single Mode with SC connector
Optical Bypass fall back switch
Switch time under 8ms
1dB Insertion loss (through loss)
Very high reliability on critical network links
IP30 sealed metal housing
Supply voltage 9 ~ 48VDC or 24VAC, 0.6Watt
DIN rail and wall mounting
Relay output for power failure warning
Operating temperature: -40 to +75°C
Industrial-grade design
Dimensions: 135 x 87 x 32 mm
In order to protect the critical fiber optic network against failure in the power system, the FIBER-BYPASS-XX series is an ultra-fast automatic recovery solution for fiber networks that cannot withstand interruption if there is a power failure on some critical network switches. Redundant backbone design with FIBER-BYPASS-XX as bypass (fiber switching) can minimize this.
The FIBER-BYPASS-XX series is an industrial grade optical fiber bypass switch with built-in 4 x duplex LC with 2-channel duplex or 4-channel simplex fiber connection with optical bypass function. The optical fiber ports support 100Gbps / 40Gbps / 10Gbps / 1Gbps / 100Mbps fiber connections. FIBER-BYPASS-XX automatically switches optical network traffic to prevent link failure during power loss. It also allows the local network switch to be replaced or removed without network downtime.
Optical fiber routing.
The FIBER-BYPASS-XX series uses fiber-to-fiber technology to achieve ultra-low loss and ultra-fast switching time. Two of the fiber ports are used to connect to two remote fiber switches, and the other two fiber ports are used to connect to the local fiber switch. The FIBER-BYPASS-XX series and the local fiber Ethernet switch are powered from the same power source.
When the system power is on, the FIBER-BYPASS-XX series operates in Normal mode and forwards Ethernet packets between two external fiber switches and the local fiber switch.
When power failure occurs, the FIBER-BYPASS-XX series operates in a switchover mode within 8 milliseconds, directly forwarding Ethernet packet between two external fiber switches and bypassing the local fiber switch.
When system power is restored, network traffic resumes operation between two external fiber switches and local fiber switch.
Can be used as an A:B fiber switch with the control voltage.
Mains adapter - switch mode type
110-240 VAC to 12VDC/1.5A
DC plug: 5.5/2.1 mm
1 meter cable
LINEAR AC / DC power supply for DIN rail mounting
230V to 24VDC 400mA - NO SWITCH MODE
No high frequency noise
Screw terminal
Operating temperature: 0 ° - 40 & nbsp; C For Indoor only use.
4 x 10/100/1G/2.5GBASE-T RJ45 copper ports
2 x 10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X SFP
1 x RJ45-to-RS232 console interface for basic management and setup
DC 9 to 48V input or AC 24V input
DIN-rail and wall-mountable designs
IP30 aluminum case
Temperature -40 to +75 degrees C
2 x digital input (DI)
2 x digital output (DO)
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
IPv4 dynamic routing protocol supports RIPv2 and OSPFv2
IPv6 dynamic routing protocol supports OSPFv3
IPv4/IPv6 hardware static routing
Supports G.8032 ERPS (Ethernet Ring Protection Switching)
IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode
Supports IPv4 IGMP snooping v1, v2 and v3
Supports IPv6 MLD snooping v1 and v2
Switch Management Interfaces
SNMP Management
8 x 10/100 / 1000BASE-T RJ45 Auto-MDI / MDIX Ports
2 x 1000BASE-SX / LX / BX SFP Interface
8 POE Injector Ports with 802.3ay / of
PoE Standard 802.3at
60GB non-blocking
32Mbits Data buffer
IEEE 802.3X pause frame for duplex
IP30 aluminum
Din rail kit and wall mounting
Alarm relay 1A, 24V DC
2 x Digital output (DI)
2 x Digital output (DO) 24v DC, 100mA max
Dimensions: 72 x 107 x 152mm
Weight: 1684g & nbsp;
Supply: 48-56 V DC
Managed PoE Switch with 8 RJ45 and 4 SFP slot
8 x 10/100 / 1000Mbit with PoE ++ (95Watt)
PoE power budget is 360Watt (45Watt per port)
PoE utvidga mode - max. 160 - 200meter
2 x 100 / 1000Mbit SFP slot - for Single- and Multimode SFP module
2 x 10Gbit SFP slot
2 x Digital input
2 x Digital outputs (Open Collector)
IGMP Snooping Seite 128 VLAN interfaces
IEEE 1588v2 Precision Time Protocol (time syncronising)
Operating temperature: -40 - + 75 ° C
Dimensions: 152 x 108 x 77 mm
Weight: 1, 2kg
Supply voltage: 48 - 56VDC (recommended min. 52VDC) 8amp
24 x 10/100/1000Mbit RJ45
4 x RJ45 1000Mbit shared with Port-1 to Port 4
4 x 10Gbit BASE-SR / LR SFP+ slots SFP
IP Stacking up to 6 units
Gigabit TP SFP and 10G SFP + interfaces
Hardware stacking up to 6 units
Switch series stacked in a logical unit
Stacking architecture supports redundant Ring mode
IPv4 IGMP / IPv6 MLD snooping v1, v2 and v3
MVR (Multicast VLAN registration)
Ethernet Ring Protection Switching
Supply voltage: 100 - 240VAC, 21Watt
Dimensions: 440 x 280 x 44 mm (1U)
Operating temperature: 0 - + 50 ° C
DIN bracket
