Current transmitter, 0-20mA / 4-20mA, 10 bit resolution, with 1-wire for data collector, 2 x RJ11

0-20mA 4-20mA Transmitter for 1-wire output

2 x RJ11 for daisy chaining

10-bit resolution

0-20mA and 4-20mA, 0.01mA resolution (+/-2%)

Galvanic isolation

IP30 tight

Good long-term stability

Each device has a unique 64 bit serial number

TSA200
1,203.20 SEK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

TSA200 is a 1-wire current loop transmitter with 0-20mA / 4-20mA input range. Current loop input is galvanically isolated from the interface.

The device communicates via a 1-Wire bus. Each sensor has a unique 64-bit serial code. This makes it possible to connect multiple sensors to the same 1-Wire bus.

The 1-wire current transmitter TSA200 has two RJ11 connectors for cascading to the next sensor.

The TSA200 can be connected to almost any industrial sensor with a 0-20/4-20mA output. Output readings in mA can be converted to other units using the offset and multiplier in the controller.

The sensor can be used to measure electrical and non-electrical parameters - liquid levels, air pressure, gas concentration, illumination, acidity (pH), etc.


TSA200 is a passive device, for some sensors an external power supply is needed - typically 12/24/36VDC.


Download technical info from the manufacturer's website:

https://www.teracomsystems.com/sensors/1-wire-current-loop-transmitter-tsa200/

4 other products in the same category:

Teracom monitor and data...

Teracom monitor and data logger program, licensed to 1-10 units, Win7 / 8/10 - FREE

Get your free license key from Teracom
DAQ software for Teracom Ethernet-based measuring devices
User-friendly WEB interface for easy configuration and control
Flexible user access and management
Distributed monitoring units in "client" fashion
Alarm notification
Activity log
Graphics and data display with large visualization
Easy access to raw data, tables, export in CSV format (comma separated)
Database management
Send command to check in "server" and "client" mode
command status log

Price Call for price
Product code: TC-MONITOR-10
Physically in stock  
Quick view
CO2, humidity, and...

CO2, humidity, and temperature multi-sensor. MODBUS RTU RS485 Interface.

Multi sensor for CO2, Temperature and Humidity
Interface: RS485 - MODBUS RTU
LED indicator for status of communication
Long-term stability based on digital signal processing
Self-calibration on fresh air for CO2 measurements
Changeable communication parameters
Non-volatile memory for all settings
Firmware update via the interface
Size: 81 x 81 x 30 mm
Weight: 66g
Supply voltage: 4,5 - 26VDC / Max. 150mA

Price 3,273.60 SEK
Product code: TSM400-4-CPTH
On the way in  
Quick view
Temperature and humidity...

Temperature and humidity sensor with RS485. -20 - +60°C, 5 - 95% RH. Modbus RTU. 12-16bit solution. IP65.

RS485 Modbus RTU kombi sensor
Temperatur: -20 - +60°C +/-0,6°C
Opløsning: 0,1°C 
Humidity (fugt): 5 - 95% rH +/- 5%
Opløsning 0,1%rH
IP65 plasthus, meget robust
Op til 32 sensorer på samme RS485 bus
16 bit ved temperatur
12bit ved fugt
Forsyningsspænding: 4,5 - 26VDC / 25mW
Mål: 74 x 66 x 36 mm

Price 2,539.20 SEK
Product code: TSH330
On the way in  
Quick view
Temperature and moisture...

Temperature and moisture meter with 1-wire. -20 - +60 ° C, 5 - 95%rh. 12-16bit resolution. IP54 Robust House

1-wire Combi Sensor
Temperature: -20 - +60 ° C +/- 0.6 ° C
Resolution: 0.1 ° C
Humidity (Moisture): 5 -95% Rh +/- 5%
Resolution 0.1%Rh
IP54 Plastic housing, very sturdy
Up to 8 sensors on the same 1-wire
16 bits at temperature
12 bits at moisture
Supply Voltage: 4.5 / 25mW
Dimensions: 74 x 66 x 36 mm

Price 2,432.00 SEK
Product code: TSH230
Physically in stock  
Quick view