Network products / Wifi / PoE / RJ45-Fiber

Bidirectional SFP module
Single Fiber LC
3KM
TX 1310nm
RX 1550nm

Bidirectional SFP module
Single Fiber LC
3KM
RX 1310nm
TX 1550nm

The data rate of 1.25Gbps to fiber cables
1310nm DFB laser and PIN photodetector for 40km transmission
compatible with SFP MSA and SFF-8472 with duplex LC receptacle
Compatible with SONET OC-24 LR 1 and RoHS
Switch to switch inte race
Router / server interface
+ 3.3V single power supply
Operating temperature: 0 to + 70 ° C
product consists of two SFP modules

Dual data-rate of 1.25Gbps / 1.063Gbps
1310nm FP laser and PIN photodetector for 10km transmission
Compatible with SFP MSA and SFF-8472 with duplex LC receptacle
Compatible with SONET OC-24 LR-1
Switch to switch interface
Router / server interface
+ 3.3V single power supply
Operating temperature: 0 to +70°C

Omni antenna
360 degree horizontal signal
6 degree vertical signal
N-type female
outdoor use
high Operating temperature -40 ~ 70 ° C
for wall and pipe assembly
35 (diameter) x 420 mm
including bracket

Rest storage

2 Ports Repeater to 10 Base2 and 10 Base5 Network
BNC / Aui Ethernet
can convert between Aui and BNC networks.

8 x 10 / 100Mb RJ-45 ports not Managed switch
2 x Gigabit SC uplink ports
Broadcast storm protection
IEEE802.3x Full Duplex, back pressure flow control for Redundant dual DC power inputs
Robust Cabinet
Relay Output Enables Relay
Supports Up to 8K MAC Addresses

8 x RJ45 PoE + 36W Gigabit
2 x SFP 100/1000 Mbit
10K Jumb frames
2M Packet Buffer
16K MAC address table
-40 to + 75 ° C

Managed Gigabit switch til rack montering
8 x RJ45 port 10/100/1000
2 x 100/1000X SFP module
RS-232 DB9 interface for management og setup
110-230VAC indbygget

8 x 10/100/1000Mbit - RJ45 med auto MDI/MDI-X
2 x SFP slot 100/1000Mbit fiber port
IP30 metalkabinet 
DIN rail og vægmontering
Redundant Power input
12 til 48VDC, redundant, med polaritetsbeskyttelse
AC input 24VAC power input er mulig
6000VDC Ethernet ESD beskyttelse
Udvidet temperatur -40 til 75°C
IEEE 802.3az

10 ports 10/100/1000Mbps Fast Ethernet switch + 2 100/1000Mbps SFP slot
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
24Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame Support
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
Redundant Power Input – 12~48VDC
1 Relay Output til Port Break Alarm
IP30 Aluminum kabinet
DIN-Rail og Wall Mount
Temperaturområde: -10° til 70°C

10 port 10/100/1000Mbps switch og 2 port 10Gbps SFP+ fiber slots
Auto MDI/MDI-X Function
Store-and-Forward Switching Architecture
16K MAC Address Table
9,216 bytes Jumbo Frame Support
Surge Protection: 2,000 VDC Support
ESD Protection: 6,000 VDC Support
Redundant Power Input Design: 12~48VDC
1 relæ output til Power Failure Warning
IP30 Rugged Metal Case Design
DIN-Rail and Wall Mount Support
Temperaturområde: -40° to 60° C

8 x 10/100 / 1000Tx RJ45 for PoE + (30W / port) IEEE 802.3at PoE for 2 x 100/1000 SFP ports for Auto MDI / MDI-X Function
Store -and-Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output for Power Failure for IP30 Rugged Metal Case Design for DIN Rail and Wall Mounting at Operating Temperature STD: -10 ° to 70 DEG C

8 x 10/100 / 1000Tx RJ45 for PoE + (30W / port) IEEE 802.3at for 2 x 100/1000 SFP ports for Auto MDI / MDI-X Function for Store-and- Forward Switching Architecture
20Gbps Back-Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC for UL Class I , Division 2 Certified
Supply Voltage: 48 ~ 55VDC
Built-in Relay Output for Power Failure for IP30 Rugged Metal Case Design for DIN Rail and Wall Mounting - Operating Temperature: -40 ° to 75 ° C

8 x 10/100 / 1000Tx RJ45 IEEE 802.3at PoE + 2 x 100/1000 SFP Ports
Auto MDI / MDI-X Function
Store-and-Forward Switching Architecture
20Gbps Back -Plane (Switching Fabric)
8K MAC Address Table
9.6Kbytes Jumbo Frame
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Power Supply : 48 ~ 55VDC
Built-in relay Output for Power Failure
IP30 Rugged Metal Case Design
DIN-Rail and Wall mounting
Operating temperature STD: -10 ° to 70 ° C

Supporter 8-Port 10 / 100Tx
2 Gigabit Combo Ports
6 x RJ45 Port 10 / 100Tx
2 x 10/100/100 RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X
Non-Blocking Switching Fabric
8K MAC Address
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
1 x built-in relay Output for Power Failure warning
IP30 Rugged Metal Case Design
DIN rail and wall mounting
Operating temperature STD: -10 ° to 70 ° C

Supporter 8-Port 10 / 100Tx
2 Gigabit Combo Ports
6 x RJ45 Port 10 / 100Tx
2 x 10/100/100 RJ45
2 x 100/1000 SFP Slots
Supporter Auto MDI / MDI-X
Non-Blocking Switching Fabric
8K MAC Address
Surge Protection: 2,000 VDC
ESD Protection: 6,000 VDC
UL Class I, Division 2 Certified
Redundant Power Input Design: 12 ~ 48VDC
1 x Built-in Relay Output for Power Failure Warning
IP30 Rugged Metal Case Design
DIN Rail and Wall Mounting
Operating Temperature EOT: -40 ° to 75 ° C

Managed switch. 8 x SFP, 2 x RJ45 ports
8 x fiber ports - 100/1000Base-SX / LX mini-GBIC SFP slots
2 x copper ports - 10/100/1000Mbit RJ45
IP30 enclosure
DIN rail and wall mounting
24:02 48V DC, redundant power
Can accept 24VAC
-40 to +75°C operating temperature
Dimensions: 152 x 107 x 72 mm

Managed Gigabit switch. 8 x RJ45, 2 x SFP
8 x 10/100/1000Mbit with RJ45 connectors
2 x 100/1000Mbit to SFP
Supply voltage: 12 - 48VDC redundant
Also accepts 24VAC
Power consumption : max. 10W
DIN rail bracket
1 relay for alerting
Dimensions: 135 x 88 x 56 mm
Operating temperature: -40 - +75°C

Mini PCI-Express Gigabit network card