Power supplies USB / ATX / AT / Mains adapters / UPSs

AC / DC power supply for DIN rail mounting
100-240V AC, 50 / 60Hz, 1.45A
Output 75W, 48V, 1.6A
Screw terminal
Short circuit, overload and over voltage protection
Dimensions: 32 x 125 x 102 mm
Working temperature: -20-70 ° C

Kingspao MPS-5200E AT XT Computer Power Supply

115V Switchable 230V 50-60Hz

190 watts

3 x Molex

2x floppy 4 pin

AT connector

Robust power supply, adjustable from 12-15VDC / 10AMB
for DIN mount
input 180-550VAC
output: 12VDC10 A (120W)
Contact output by power error
Screw terminal
Dim: 130 x 125 x 40mm (H x D x B)
operating temperature: -25 ° C - + 70 ° C

12 VDC to 230 VAC inverter & nbsp; with & nbsp; sine curve
12 volt battery to supply 230 VAC units
NOTE: at 140Watt, the power to the 12Volt battery is 14Amp
Provide short and powerful DC wires to battery.

AC / DC power supply for DIN rail mounting
5VDC, 25W
Max. 5A
Screw Terminal
Adjustable Output Voltage 4.5 V to 6.2 V
Working Temperature: -20 ° C - + 50 ° C

Switch mode type
90-264 VAC 
12VDC, 7A stabilized 
DC plug: 5.5 / 2.5mm
Cable: 31.5cm and with ferrite

12VDC for 230VAC inverter with step-by-step sine wave
12-volt battery for supplying 230VAC devices
NOTE: at 350Watt, the current from the 12V battery is 32Amp !!
Make short and powerful battery cables
5V USB Outlet
Supply: 9.5-16VDC
With Schukostik & nbsp;

AC / DC power supply for DIN mounting.
Input 115-230VAC
output 24VDC 5A (120W)
Adjustable from 22 to 27vdc
Screw terminals
Dimensions: 55 x 110 x 105mm
Operating temperature: -25 ° C - + 70 ° C

Switch mode type
90 - 264VAC to 15VDC 2,67A
DC plug 5.5 / 2.1mm
Extras K-PWR-L

Versatile UPS with DC output voltages
10400mAh battery capacity
85 - 265VAC input.
3 pieces. DC jack with 5VDC, 9VDC, 12VDC max. 12W
1 USB 5VDC 10W
Passive PoE output (PoE injector) max. 14W
Choose between 15VDc and 24VDC (Not PoE standard!)
DC cables included
Dimensions: 160 x 102 x 32 mm

AC / DC power supply for DIN rail mounting
Output voltage: 48 - 55VDC adjustable from front
100-240V AC, 50 / 60Hz, 2.5A
output 120 watt, 48V, 2.5A
screw terminal
short-circuit, overload and overvoltage protection
Dimensions: 40 x 125 x 113 mm
Working temperature: -20-70 ° C,

DC safety switch 32A 1000V with screw terminals
For installation in an electrical cabinet
YOUR bracket
Operating temperature: -25℃ - +85℃
Dimensions: 90 x 65 x 80 (D)mm
IEC, CB, TUV, SAA, NEMKO, CE approvals

Universal DC UPS 12 watts
Output Voltage: 5VDC / 7.5VDC / 9VDC or 12VDC
6 different DC Jack connectors included in 5200mAh (Li-Ion batteries)

18 - 36VDC DC / DC Converter for 24VDC Fine adjustment
isolated DC / DC converter with large voltage range
24VDC 1,1A output

Output 24VDC / 5A (120W) via terminal block
Input 100VAC - 240VAC / 50 / 60Hz / 1.4A via IEC C14 connector
Switch mode power supply
Dimensions 165 x 67 x 35.5mm (L x W x H)

AC/DC power supply for DIN rail mounting
AC input: 180 - 550VAC
Power: 60W
Output voltage: 24V / 2.5A
Screw terminal
Adjustable output voltage to 24 to 29V
Working temperature: -30 - +85°C
Dimensions: 125 x 102 x 32 mm (H, D, W)

AC / DC power supply for your rail Mounting
AC Input: 180 - 500VAC
Effect: 60W
Output voltage: 12V / 5A
Screw terminal
Adjustable output voltage for 10.8 to 13.2v
Working temperature: -30 - + 85 ° C
target: 125 x 102 x 32 mm (H, D, B)

AC / DC power supply for your rail mounting
AC Input: 180 - 500VAC
Effect: 60W
Output voltage: 48V / 1.25A
Screw terminal
Adjustable output voltage for 48 to 57VDC
Working temperature: -30 - + 85 ° C
target: 125 x 102 x 32 mm (H, D, B)

Kan benyttes hvor den ordinære netspænding (230V AC) ikke
er tilgængelig f.eks. i biler eller på skibe.

Singel Phase
Line-Interactiv
GreenPower UPS bypass Technology
230 ± 10%
Schuko
400VA
Overloadprotection
3 x schuko out
Runtime at 60W 28Min
Runtime at 90W 16 min
Sealed Lead-acid battery

DC safety switch 32A 1000V with MC4 connectors 
IP66 close
Operating temperature: -25 ℃ - + 85 ℃
Dimensions: 108 x 110 x 166mm
IEC, CB, TUV, SAA, NEMKO, CE approvals

Input voltage 95-265VAC
Manual Select voltage: 5V / 7.5V / 9V / 12V
Adapters for 3.5 x 1.35mm, 4.8 x 1.7mm, 5.5 x 2.5mm
Main DC connector 5.5 x 2.1mm
Digital with Microprocessor Control
Battery Level, Battery Life Led Indicator
Over Discharge, Overload, Short Circuit Protection,
Over Charge, Surge Protection

48 Watt USB charger with USB 3.0 Hub
10 x USB3.0 A she
8 x USB ports - max. 2.4a to USB port
2 x USB ports - Max. 1A for USB port
Note: Total power for all USB ports is 48 watts.
Button next to the USB port is on / off USB port
USB 3.0 cable from A to B included
input: AC 100-240V
Output: 12V / 4A (48W)
174 x 130 x 47 mm

DC/DC BUCK konverter fra 9-36VDC til 24VDC
Effekt: 240Watt (10Amp)
Ikke isoleret mellem indgang og udgang
Switchmode - 97% effektivitet
IP68 aluminium med epoxy sealing
Kortslutning-, overspænding- og temperaturbeskyttet
Mål: 100 x 80 x 39 mm
Vægt: 470 g 

AC / DC power supply for DIN installation.
Input 115-230Vac
output 48VDC 3,75A (180W)
Adjustable from 41 to 55VDC
Red LED indikate DC out is OK
Screw terminals
Dimensions: 55 x 110 X 105mm
Operating temperature: -25 ° C - + 70 ° C

Input: 100-240VAC,0.6A,50/60Hz
Output: +5V/1.5A, +12V 1.8A
6pin, stabiliseret/reguleret.

Outputs 16 x USB 3.0 USB-A
Inputs 1 x USB-B 3.0-B
DC input 12VDC/ 7.5 amp (90 watts)
Turn on/ off button on each USB port
Up to 450MB/S 5GB/S Theoretical
Aluminum
Power Supply 12V/7.5a included
Dimensions: 123 x 54 x 25 mm

ATX Power Supply P4 - 80PLUS Gold
Power 650 W
Pin 20 + 4
4 x SATA
4 x MOLEX for PCI Express 2 x 6 + 2 pins
100- 240 VAC

300W SFX, with auto detection of AC

Dimensions: H 64 x W 125 x D 100

Switch mode power supply for 100-240VAC, 1.3A, 50 / 60Hz
Output voltage 12VDC / 7A
DC plug 4pin

19 - 36VDC - DC / DC Converter for 12VDC, adjustable
Isolated DC / DC converter with large voltage range
working temperature -10 - + 60 ° C

INPUT 8-40VDC
OUTPUT 12VDC 10A
Operating temperature -30 ° C to + 80 ° C
not isolated between input and output.
IP68
Overvoltage protection
over -Current protection
Over-temperature protection
Screw terminals - solder eye included
Dim: 110 x 72 x 24 mm

12-25VDC to 48VDC 384Watt step-up converter
No galvanic isolation between input and output
Input from 10 - 25VDC
93% efficiency
Max. ripple full load: 170mV
No-load current: 70mA
Overvoltage and overheat protected
Aluminum metal housing with IP68 tightness
Flange mounting
Cable length: 14cm
Working temperature -40 - +80°C
Dimensions: 100 x 80 x 39mm
Weight: 500g

90 Watt ATX power supply connectors P4

Power supply for i.a. notebook
C6 plug, DC plug 5.5 / 2.5mm
1.8 meter cable
Output Current: 6.32A
Output Voltage (s): 19 V
Max: 120 W
-20 to + 80 °

Input Output 8-36VDC
12VDC 15A
Operating temperature -35 ° C to + 80 ° C
not isolated between input and output.
IP68
Overvoltage protection
Over -current protection
Over-temperature protection

Avoid data loss in the event of a power failure
Compact Tower UPS 600VA/240Watt
Line-interactive means switching on in case of mains failure (2-6ms)
Emergency supply time: 50% load for approx. 6 minutes
Noise level: Less than 40 dbA at 1 meter
Modified sine curve (stair step curve)
4 hour recharge time to 90% capacity
Auto restart when mains supply is re-established
Battery: 1 pc. 12V/7Ah - see manual for lifespan
Dimensions: 279 x 142 x 101 mm
Weight with battery: 4.2 kg
Operating temperature: 0 - + 40°C

240W 48V DC Single Output Industrial DIN Rail Power Supply
Universal AC input / full range
PFC funktion
Køling ved fri luftkonvektion
Til DIN skinne montering
LED indikator
Drifttemperatur -10-70° 

18 - 36VDC DC / DC converter to 5VDC
Large DC voltage DC / DC converter
5VDC 2A
Working temperature -25- + 70 ° C

MEDICO approved power supply for UL 2601-1, IEC601-1, EN 60601-1 approved
EMC in accordance with EN 55011 (CISPR11) Class B
MTBF: MIL-HDBK-217F (25 ° C) (MES30A series)
UL, CUL, TÜV, CB
5VDC, 7,5Amp
5 pole DIN connector on cable

AC / DC power supply for DIN rail mounting for 48VDC, 96W
Max. 2.5A
Screw Terminal
Adjustable Output Voltage 43.2 to 52.8 V
Working Temperature: -20 ° C - + 50 ° C

180 - 550 VAC input for 24-28VDC fine adjustment
120 W voltage supply
DIN rail mounting
Adjustable output 24 to 28VDC
Working temperature -30 - + 70 ° C

36W - 10500mAh battery
Same output voltage
Intervals: 12VDC, 15VDC, 19VDC, 24VDC
Power Jack adapter included

Mini power bank for power supply in case of power failure
Battery capacity 7800mAh
5VDC / 1A output USB
12VDC / 2A output via Power Jack 5.5 / 2.5mm
Charging voltage is 12VDC - Purchase DC12V / 1.5ARQ

To prevent loss of data during power failure
Compact Tower UPS 800VA / 480Watt
Line-interactive means switching at power failure (2-6ms)
Nødforsynings time: 50% load for about 3 minutes
Noise level: Less than 40 dbA at 1 meter
Modified sine wave (staircase curve)
4-6 hour recharge time to 90% capacity
Auto restart on mains supply restored
Supports automatic shutdown via software
Battery: 1 pc. 12V / 7Ah - see manual for life
Dimensions: 279 x 142 x 101 mm
Weight with battery: 4.9 kg
Operating temperature: 0 - + 40 ° C

18 - 36VDC DC / DC converter for +/- 15VDC
Insulated DC / DC converter with large voltage range
+ 15VDC and -15VDC 300mA

Input from 36 - 75VDC
Output 12VDC Max. 10A (120watt)
92% Efficiency
synchronous rectifier technology
IP65
Dim: 110 x 70 x 23 mm
CE Rohs

18-36VDC DC / DC converter for 24VDC
Insulated DC / DC converter with large voltage range
DIN mounting

Input 90~264Vac Auto 
Internal 8 cm fan with IEC 62368 standard vents opening
Low Ripple Noise
Support OCP, OTP and OVP circuit protection
Short circuit protection on all outputs
Resettable power shut down
MTBF:100K hours at 25°C
100% under high ambient temperature (50°C)80 plus bronze
350watt
ATX
PS2 format
industrial
H 86 x B 150 x D 140

Standard PS2 størrelse: 150x140x86 mm 
NB: Ikke ATX
Kan benyttes med spænding mellem 8,5 til 16V DC.