Mifare læser til RS232
Multi 13.56 MHz Mifare Reader
RS232 Connection
5VDC (Power Jack 5.5 / 5.1mm) Not included
Cabinet: ABS, indoor IP65
Dim: 88 x 56 x 18 mm
In this overall category you will find a wealth of products and subcategories. Danbit offers for everything from RFID readers Card readers. We stand ready to help you with choices and possible. setup. Looking for something specific, which may be tailored to your job, contact Danbit tel. 56 66 20 20.
In our knowledgebase, you can read more about blah. barcode formats.
Subcategories
There are 161 products.
Multi 13.56 MHz Mifare Reader
RS232 Connection
5VDC (Power Jack 5.5 / 5.1mm) Not included
Cabinet: ABS, indoor IP65
Dim: 88 x 56 x 18 mm
IC / RFID / MAGNET motor reader
USB interface
three in one card reader
example. kiosks and the like
Automatic in / out
Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC
BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!
Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)
Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required
NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!
Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)
Can read maps where the magnetic strip turned toward or away from the user
HID - keyboard wedge
Opsætnings softwaren virker kun på en Windows XP pc der har en PS2 keyboard port
Farvebånd til 200 kort (til PRINT-ID/PRINT-ID-MAG)
Evolis R3011 color ribbon
Tilsluttes RS232 (serieporten)
MCR-BARCCD-K kan læse både magnetkort (spor 1 og 2) og stregkoder.
Kan indsætte diverse formateringstegn, f.eks. linjeskift.
Programmerbar magnetkortlæser med PS/2 interface. Lysdioder sikrer optisk kvittering, akustisk lydsignal ved korrekt aflæsning af magnetkort.
S/H bånd til 1000 kort (til PRINT-ID/PRINT-ID-MAG)
Evolis R2011
Zebra 8000T Z-ENDURE
Active RFID Tag as bracelet with light sensor, anti-tamper
2.45 GHz read and write
Dimensions: 44W x 30H x 11D (mm)
weight: 23.4g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified
Active RFID Tag as bracelet with 2 x temperature sensor
with light sensor
2.45 GHz Read and write
Dimensions: 44W x 30h x 11d (mm)
Weight: 23.4g
Wireless programming Digital RSSI / LQI data
low battery warning
built-in button
FCC, CE certified
Active 2.45GHz RFID TAG card
2.45GHz read and write
Transmission distance 140m
programmable parameter
Supplied without 2 x 3V CR2032 battery
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
wireless TAG programming
Active 2.45GHz RFID TAG
2.45GHz read/write
Range up to 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
Wireless programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
Built-in SOS button