Angle bracket for DOOR-MAGNET-DUAL6. To outward door. Extruded aluminum
Angle bracket for mounting on frame
for fitting to outward door
DANBIT A / S has a large selection of standalone access control blah. Iris scanner, finger scanner and other accessories for ADK and monitoring.
Personal access, traffic through locks, bollards number plate recognition, etc. Here is a small selection of what we offer.
Other solutions and options can be offered. Contact our sales department.
Atomic clock solutions that synchronize servers and resemble the...
DANBIT A / S has a large selection of standalone access control blah. Iris scanner, finger scanner and other accessories for ADK and monitoring.
Personal access, traffic through locks, bollards number plate recognition, etc. Here is a small selection of what we offer.
Other solutions and options can be offered. Contact our sales department.
Atomic clock solutions that synchronize servers and resemble the Frankfurt transmitter that has a range of 2000km.
GPS time receiver for exact time on servers.
Subcategories
There are 168 products.
Angle bracket for mounting on frame
for fitting to outward door
angle bracket for frame
for outward door
Angle bracket for mounting on frame
for outward door
Accessories for DOOR-MAGNET-MI
angle fittings for outward door (outswing)
The kit consists of 1 part
heavy aluminum profile
Dim: See drawing
Mounting bracket for Door-Magnet-Yx28 types.
for inward doors.
2 parts of extruded aluminum
Screws included
target: 250 x 49 x 30 mm and 180 x 50 x 50 mm
anodized
Angled bracket for the door-magnet-yx35 types.
for attaching the holdemagnet.
1 part of extruded aluminum
screws included
target: 260 x 55 x 33 mm
anodized
Angled bracket for the door-magnet-yx35 types.
for attaching the holdemagnet.
1 part of extruded aluminum
Screws included
Dim: 265 x 73 x 45 mm
anodized
Tilbehøt to DOOR-MAGNET-MINI
bracket for mounting the door magnet on the side of the frame
Strong Aluminum
Rev: LO
Accessories for Door-Magnet-V12
Mounting the Hold Magnet on side of Karm
mounting door plate If this is necessary
for outward door (outswing)
Heavy Aluminum profile
Dim: L 220 x D 70 x B 45 mm
Door Phone 720p camera
Up to 99 apartments
Resident access via PIN code or RFID tag
Supports calls to mobile phone via SIP
Outdoor unit is IP65 close
Modules for additional apartments available separately (contact our sales department)
Power supply Outdoor unit: 12VDC or PoE, Family unit: 12VDC
App for Android and IOS allows residents to let guests in from the phone
Door switch for access control - EXIT button.
End contact by pressure
Contact: NO/NC/COM
Max. 36VDC 3Amp
Cast aluminum body, steel button
12VDC LED supply
Operating temperature: -20 - +50°C
Dimensions: 80 x 30 x 24 mm
Door switch for access controls - EXIT button.
make contact by pressing
Contact: NO / COM
Max. 36VDC 3Amp
cast aluminum, steel button
Operating temperature -20 - + 50 ° C
Dimensions: 83 x 32 x 25 mm | Weight: 135g
Electronic door magnet for double-doors, folding door etc.
Holding force up to 364 kg for each door
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Automatic change-over between 12 and 24 VDC
No holding force when not energized
Operating temperature: -10 - 55 ° C
Humidity: 0-95% non-condensing
Double magnet: 530 x 49 x 29 mm
Door plates: 185 x 45 x 14 mm
Double-mounting plate: 530 x 29 x 5.5 mm
Weight: ca. 5.6 kg
Electronic door magnet for double-doors, folding door etc.
Holding force up to 544 kg for each door
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Automatic change-over between 12 and 24 VDC
No holding force when not energized
Operating temperature: -10 - 55 ° C
Humidity: 0-95% non-condensing
Double magnet: 534 x 68 x 40 mm
Door plates: 185 x 61 x 16 mm | Double-mounting plate: 534 x 40 x 8 mm | weight: ca. 6.5 kg
Electronic door magnet for double-doors, whop door etc.
Holding power up to 545 kg for each door
Aluminum House and Vandalsproof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6 watts
Automatic switching between 12 and 24VDC
No holding power at voltageless
Operating temperature: -10 - 55 ° C
humidity: 0-95% non-condensing
double magnet: 533 x 71 x 40 mm
Door plates: 185 x 61 x 16 mm
Double mounting plate: 533 x 40 x 8 mm
Weight: approx. 5.6 kg
Buy access system - see accessories
Electronic door magnet for double-doors etc.
Holding power up to 545 kg for each door
Aluminum housing and Vandalsproof
Supply voltage for hold: 12VDC or 24VDC, minimum 2 x 6 watts
Automatic switching between 12 and 24VDC
No holding force at voltageless
Operating temperature: -10 - 55 ° C
humidity: 0-95% non-condensing
Double magnet: 530 x 52 x 29 mm
Door plates: 185 x 45 x 14 mm
Double mounting plate: 530 x 45 x 14 mm
Weight: approx. 5.5 kg
buy access system - see accessories
Electronic door magnet for double doors, swing doors etc.
Holding force up to 272 kg for each door
Aluminum housing and vandal-proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Switching between 12 and 24VDC
No holding power when de-energized
With Bond sensor (door closed sensor)
Option: Door status sensor, Re-lock timer
Operating temperature: -10 - 55°C
Double magnet: 500 x 44 x 26 mm
Door panels: 185 x 38 x 12 mm
Double mounting plate: 500 x 26 x 5.5 mm
Weight: approx. 5 kg
Additional access system - see Accessories
Door machine with switch-box for swing-door
Supplied switch box for function selection
With connection for access control
With connection for NON-TOUCH access switches
Connection for emergency battery
Approved according to EN 61000 standards for safety
Supply voltage: 100 - 240VAC
Built-in motor: 60VDC, 2Amp
Power consumption: approx. 77 Watt
Connection for 24VDC backup battery
Dimensions: 125 x 79 x 34 mm
Door opening angle 80 - 120 °
Door width: 750 - 1200 mm
Door height: 2800 mm
Door weight: 50 - 150 kg
230VAC
Electric door lock that is locked without tension.
Holding force 1000 KG
supply: 12 / 24V DC 130 / 65mA when activated
Suitable for Scandinavian types
Operating temperature: -20 ° C to + 40 ° C
Multi voltage 12-24V AC / DC
approved for use in fire-resistant doors E120 / A120 / EI120
Fail secure (PTO): SL 510
Fail safe (PTL): SL 511
Latch bolt adjustable left / right
Built in "By status" sensor
Status monitoring: latch, anti-thrust bolt & amp; live handle
Mechanical key override
Bolt lock for frame, locked with tension,
holding force 1000 KG
Built-in time control and reporting contact
12VDC 900 / 150mA start / operating current
Time delay: 0.3.6.9 sec.
CE & amp; MA Certified
Dimensions: 34 x 38 mm