Double electronic door magnet with 12/24VDC switching, closed sensor. Indoor double doors. Holding power up to 2 x 272 kg

Electronic door magnet for double doors, swing doors etc.
Holding force up to 272 kg for each door
Aluminum housing and vandal-proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Switching between 12 and 24VDC
No holding power when de-energized
With Bond sensor (door closed sensor)
Option: Door status sensor, Re-lock timer
Operating temperature: -10 - 55°C
Double magnet: 500 x 44 x 26 mm
Door panels: 185 x 38 x 12 mm
Double mounting plate: 500 x 26 x 5.5 mm
Weight: approx. 5 kg
Additional access system - see Accessories

DOOR-MAGNET-DUAL6
2,519.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

DOOR-MAGNET-DUAL6 is used for swing doors, swing doors, double doors, etc., where an electronic lock cannot be installed. DOOR-MAGNET-DUAL6 can be used with most access control controllers that have single or dual relay output. The product contains 2 powerful electromagnets that "lock" to the piece of metal that is mounted on the respective door. When there is voltage on DOOR-MAGNET-DUAL6, the door cannot be opened. An access control connected to DOOR-MAGNET-DUAL6 which accepts e.g. a password, will cut off the voltage to the magnet coil and the magnets will release, allowing the doors to be opened. Holding power: 2 x 2724 kg. Automatic switching between 12VDC and 24VDC voltage for the holding magnet. Estimated power consumption is a minimum of 12 Watts. Since the electromagnets are supplied with voltage in hold mode, the power supplies for DOOR-MAGNET-DUAL6 should be able to deliver at least double the power (25 - 50Watt), this to minimize heat generation in the power supply.