Serverrum: Overvågning / Styring

Remote control of the DC voltage
2 x LAN and 1 x WAN port - network switch
Power supplied from 12VDC - supplied
Output voltage 5VDC or 12VDC / 2Amp
2 x DC cables with Jack 5.5 / 2.5mm and 3.1 / 1.3mm of 1.0m
2 x CAT5E UTP network cable of 1.0m

Relay box for switching on/off 2 x 230 VAC equipment via the network
Shows current power consumption and ambient temperature on PC.
Web server built-in - password-protected.
Time schedule - time table for switching on/off
Time table for on/off. 2 x 230VAC outputs

Network operated relay box for switching on/off 230 VAC equipment
Shows current power consumption and ambient temperature on PC.
Web server built-in - password-protected.
With IP ping to stable website, it checks network outage.
If there is no response, it turns OFF/ON the desired external equipment.
ON/OFF can be controlled remotely from the browser.
Scheduled ON/OFF
HTTP, TCP/IP, DHCP, DDNS, SNMP v1, SMTP, NTP

Temperatursensor til temperaturmåler med 2 meter kabel

Network-based device for switching on/off 230 VAC equipment.
Web server built-in - password-protected
Can ping a stable IP address and if there is no response - switch equipment off and on
Timetable for switch on and off - scheduler
Additional mains cable: K-PWR-SHUKO180

Netværksbaseret enhed til tænd/sluk af 230 VAC udstyr. 
Web-server indbygget - password-beskyttet
Kan pinge en stabil IP-adresse (f.eks. Google) og ved manglende svar - slukke og tænde udstyr 

Open board til smart temperatur- eller fugt måling and styring
Password beskyttet Web baseret konfiguration og kontrol
1 x digital input med “dry contact” og “logic level” mode
1 x analog input fra 0 til 60VDC
1 relæ output med NO/NC kontakter
1-Wire input til 1 temperature eller fugtmåler
SNMP v.1 support
SNMP traps ved alarm
E-mail udsendelse ved alarm
SMTP med godkendelse (SSL/TLS er ikke supporteret)
HTTP og XML API kommandoer
Remote FTP firmware update.

Water detector with normally closed relay output
Supply voltage: 5VDC / 10mA
Relay contact: max. 30VDC/500mA
Red: +5VDC
Black: GND
Green: Relay contact
White: Relay contact
REMEMBER: Relay contact opens when water is removed.

1 channel detection of fluid leakage with MODBUS
Shutter local alarm of detection of water leakage
Acoustic alarm - adjustable
RS485 2-wire MODBUS RTU
2 x LED indicators for power and alarm
Relay output for alarm for water leakage - 30VDC / 2A
Monitor cable for liquid detector
Sensor cable can be up to 500 meters
Sensitivity is adjustable
Supports DCON and Modbus RTU protocols
Embedded Dual Watchdog
Operating temperature: -25 to + 75 ° C
Small form factor with DIN bracket
Dimensions: 83 x 70 x 29 mm
Operating voltage: 10 - 30VDC

Mini vertical level switch / swim switch
Assembly: Vertical
contact output: Direct load
Cable length: 30 cm
Operating temperature: -20 ° C to + 80 ° C
AC voltage Max: 130V < Br> DC voltage Max: 180V
Max current: 700mA

7 ports PDU with overall power meter through network
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C7 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for remote sensor (temperature, humidity, hPascal
SNMP Get / traps and email support

7 ports PDU with overall power meter via network
can measure residual current measurement
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C13 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for external sensor, temperature, moisture, hPascal
SNMP Get / traps and e-mail support

20 ports PDU with individual and total power meters via network
User interface via web browser with Password
16 x IEC C13 outputs 10A & nbsp;
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support

20 ports PDU with individual and total power meters via network
Integrated residual current measurement type A
User interface via web browser with Password
16 x IEC C13 outputs 10A
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support

CPU: 720Mhz/ 4 Core/2GB/Linux v.5.10
10/100 ethernet connection
2 x USB to USB camera, USB FLASH, USB HUb
8 x Analog ports
32 x Digital inputs
8 x Isolated digital outputs max. 24Vdc, 15mA
2 x Relay (NC NO COM) max. 10A for AC, 9~30V for DC voltage
LTE slot modem (modem purchased separately)
1 x Audio-Video output & input
SBNP v1, v2c, v3
OpenVPN, SSL, HTTPS
DHCP, HTTP, DynDNS, SMTP, RADIUS, Syslog, NTP server, HTTP request
API
Notification E-mail, phone call, SNMP, WEB to SMS, SMS Link
Logging SD, USB Flash, E-mail, FTP
power supplies single/redundant 24-48Vdc, 230Vac (contact sales regarding versions)

Supports optional choice of ports from 8 - 12 - 16 - 20 - 24 ports.

The Current changes with the various models 16 - 32 A.

Current and voltage (total input) measurement;

Built in temperature and humidity sensor

Embedded technology, support Java, web browsing;

Two level values of warning and overload can be set;

LED indicates the power supply status of each switch;

LED digital display shows the current voltage and current values;

Provide local operation query button of PDU device;

Built in lightning protection circuit, anti voltage surge circuit, effective protection of the server;