

DC Power extension cable IEC male to Schuko female 1.8 meters
IEC 320 C14 Male Plug to European CEE 7/7 3Pin Female Socket Power Cord , C14 to EU SCHUKO PDU UPS Cable, 1.8 meter
Network-based device for switching on/off 230 VAC equipment.
Web server built-in - password protected
Can ping a stable IP address and if there is no response - turn equipment off and on
Timetable for on and off - scheduler
Mains socket is SCHUKO
The power supply for 230 VAC devices can be controlled with the NPOWER1+ which is inserted between the power supply and the device. From any PC on the local network (or over the Internet), the relay in the NPOWER1+ can be switched on and off.
The device is operated by entering the IP address of the NPOWER1+ in a Web browser, after which a built-in homepage (web server) appears. It can possibly be used to restart equipment that may be locked, such as routers and PCs. In this way, it is easy to restart, for example, a locked server and with the Watchdog timer function an ADSL cable modem or router, if it does not receive a response from the Internet.
Remote control of 230 VAC supply via local and internet.
10/100 Mbit Ethernet connection with RJ45 connector.
Supports HTTP, TCP/IP, SNMP, DHCP, DDNS and NTP protocols.
NOTE: Rebooting equipment or turning it on/off via the Internet requires a known IP address - either a fixed one or you can use Dynamic DNS (DDNS). This requires that the router supports DDNS, which works in such a way that the router contacts the DDNS provider (e.g. dyndns.dk) and provides its current dynamic IP address, after which the DDNS server associates the dynamic IP address with a fixed web address, e.g. "minkonto.dyndns.dk" or "www.mitdomæne.dk/npower1". To use this function, an account must be created with dyndns.dk or other DDNS providers.
It also requires that the selected port in NPOWER1+ be forwarded to NPOWER1+'s internal IP address in the router.
IEC 320 C14 Male Plug to European CEE 7/7 3Pin Female Socket Power Cord , C14 to EU SCHUKO PDU UPS Cable, 1.8 meter
Energy meter Per outlet in KWh.
Cannot turn on / off exits !!
8 x 230vac IEC C13 Outlet with energy measurement in kWh per removal.
Web interface
4 x potential-free shutter release, & 230VAC / 16 A, & 24VDC / 10 A
8 x passive signal inputs - contact inputs
1 x RJ45 Ethernet
4 x Watchdog to monitor connected devices (ICMP / TCP)
1 Mini-DIN connector for optional sensor or serial interface (RS232)
Programmable on / off sequence
SNMP Get / Traps (SNMPv1, SNMPv2c), Syslog, e -mail
APP for Android and iPhone
2-color LEDs for status info on front
DIN rail mounting
Web-based remote control of switching on/off via the Internet
Built-in Web Server. Username + Password
MQTT, Cloud, SNMP
APP for Smartphone
Watchdog with ping of stable website (Google etc.)
4 x 230 VAC sockets - IEC C-13 output 10A and C-14 input 15A.
Web server built-in - password-protected.
VPN Client
Supports: HTTP, HTTPS/SSL, TCP/IP, PPPOE, DHCP, DDNS, SNMP v3, SMTP, NTP, TLS
Supports: Cloud Connect : AWS IOT, GOOGLE Cloud IoT, Microsoft AZURE IOT
Dimensions: 195 x 116 x 45 mm
Rack fittings are purchased separately
Open board til smart temperatur- eller fugt måling and styring
Password beskyttet Web baseret konfiguration og kontrol
1 x digital input med “dry contact” og “logic level” mode
1 x analog input fra 0 til 60VDC
1 relæ output med NO/NC kontakter
1-Wire input til 1 temperature eller fugtmåler
SNMP v.1 support
SNMP traps ved alarm
E-mail udsendelse ved alarm
SMTP med godkendelse (SSL/TLS er ikke supporteret)
HTTP og XML API kommandoer
Remote FTP firmware update.