PCI Express SATA III 4-port expansions cards
4 Port SATA PCIE Cards for each port up to 500MB / S to 4 individual ports (no raid)
Processor. Marvell 88SE9215
SATA up to 6.0 GB / S
Non-Raid
IP67 and IK10 Gbit PoE injector for outdoor mounting
PoE++ (60W) injector for PoE equipment
1 x RJ45 port for PoE++ out Data+PoE
1 x RJ45 port Data in
1 x Phoenix connector for the input voltage
DC24V 72W input
DC36V 71W input
DC54V 66W input
PoE standard: IEEE 802.3at/bt (PoE++)
PoE out Mid-span / End-span
Operating temperature: -40 - +75°C
Wall bracket
Dimensions: 170 x 73 x 44 mm
Weight: 425
Very practical and robust industrial PoE++ Injector
To meet the growing outdoor PoE applications, the ETH-POE++INJ-WP is an industrial grade, IP67 rated 802.3bt Power over Ethernet Injector that delivers PoE power to equipment that can be powered by PoE via PDS cable. This makes it possible to deliver a maximum of 60 watts.
The ETH-POE++INJ-WP is designed to work under the operating temperature range from -40 to 75°C. It is an ideal solution for transferring power to PoE equipment from a traditional network device without the need to install additional sockets and electrical cables in the industrial environment.
PTZ speed dome camera
Thin client
All-in-One touch PC
Remote digital signage display
4 Port SATA PCIE Cards for each port up to 500MB / S to 4 individual ports (no raid)
Processor. Marvell 88SE9215
SATA up to 6.0 GB / S
Non-Raid
Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS
LTE Panel antenna, indoor/outdoor
2 x N-female connector
35° horizontal and 32° vertical radiation
IP67
Temperature: -20° ~ +75°C
Impedance, 50 ohms
Max power: 50 Watt
Frequency band: 698-806MHz / 824-894MHz / 925-960MHz / 1710-1885MHz / 1920-1980MHz / 2110-2170MHz / 2500-2690MHz
Dimensions: 473 x 252 mm
Weight: 1.4kg
Mast bracket included
4-port 10/100 / 1000BASE-T RJ45 with IEEE 802.3af / 802.3at PoE injector
1-port 10/100 / 1000BASE-T RJ45 WAN port or LAN port interface (router mode or switch mode )
1 x USB 3.0 port for backing up and restoring configuration file
PoE power is 36Watt per port - automatically Detect PD
PoE monitoring, status, strømbudg PoE port enable / disable, PD live check
IP30 metal housing, DIN bracket
Dimensions: 180 x 140 x 25 mm | Operating temperature: -10 - + 60 ° C
Supply voltage: 48V ~ 56V DC (PSU purchased)
Supports IEEE 802.1Q / D
Security: port filter, MAC filter, IP source protection, anti-DoS