5VDC 4 Amp (20Watt) power adapter from 100 - 240VAC, plug: 5.5 / 2.5mm
Switch mode type
100-240 VAC to 5VDC / 4 A
DC plug. 5.5 / 2.5mm
LoRaWan transceiver with digital inputs
LoRaWan transceiver with relay output (SPDT)
Supporter LoRa Class C Protocol
Serial Port: RS232 or RS485 (Transparent data)
Collects data to be transmitted to LoRa-Gateway Controller
Frequency: 868MHz - Range Up to 10 km
1 x Antenna 2dBi - SMA male connector
Configuration Port: Micro USB
Operating temperature: -40 - +70°C
Supply voltage: 5 - 24VDC
Dim: 79 x 60 x 24 mm
is an indoor loRa-node controller used for data collection from multiple sensors. It contains various I / O interfaces, including digital inputs, relay outputs and serial ports to simplify the implementation and replacement of Lorawan networks. In addition, it can trigger multiple states and actions without a network. With its industrial design and IP30 metal house, it is very used in indoor applications such as smart industries, building automation, etc. The Lorawan controller with built-in multiple industrial interfaces connects to all types of sensors, meters and other appliances. It also bridge between Modbus data between serial and Ethernet network via Lorawan. It supports Lorawan Class C protocol to be in full compatibility with standard Lorawan gateways including the Lora Gateway5 series. It is ideal for large-scale IOT application implementations, such as projects for building automation, smart measurement, HVAC system, etc. With multiple interfaces, Lorawan controller can perfectly help retrofit older assets to IOT activation.
Switch mode type
100-240 VAC to 5VDC / 4 A
DC plug. 5.5 / 2.5mm
12 Volt 15 W power supply
DIN rail mounting
Screw terminals
Fine tuning output voltage
Operating temp: -30 - + 70 ° C
LoRaWan with stable connection to IoT units
4 x 10/100 / 1000Base-T RJ45 LAN ports
1 x 10/100 / 1000Base-T RJ45 WAN port
1 x LoRa antenna - 2DBI with SMA male
1 x Serial console Port (RS485)
2 x DI / DO and 1 serial port (RS485) for Modbus applications
For EU 868MHz (SUB 1G) Frequency
8 Programmable parallel demodulation paths
static IP / PPPoE / DHCP client for WAN
DHCP server / NTP client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm
LoRaWan with stable connection to IoT units
Dual Band WiFi - 2 antennas with RSMA male
3 x 10/100/1000Base-T RJ45 LAN ports
1 x 10/100/1000Base-T RJ45 Wan-Port
1 x LoRa Antenne - 2DBI with SMA male
2 x DI / DO and 1 serial port (RS485) for Modbus applications
to EU 868MHz (SUB 1G) Frequency
8 Programmable Parallel Demodulation Roads
Static IP / PPPoE / DHCP Client for WAN
DHCP Server / NTP Client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm
MOXA MIINEPORT E3
10/100 Mbps embedded serial device servers with RJ45
IEEE 802.3af compliant PoE pass-through
Use Moxa’s high quality and reliable second generation MiiNe SoC
Versatile choice of operation modes fulfill specific application requirements
Green design with extremely low power consumption
MiiNePort NetEZ Technology makes integration incredibly easy
Highly compact embedded device module
Support IPv6
Managed 10/100/1000Mbit Robust Industrial Switch
Vibration Safe and dust proof
M12 5 Pin Coded connector
with automatic Bypass for next switch if failure
IEEE 1588v2 Precision Time Protocol (PTP)
PTP is time synchronization in infrastructure
Modbus TCP/IP to SCADA
SMTP / SNMP Trap - generates Email Alarm
IGMP and MLD Snooping for Multicast
VLAN Routing (Layer 3)
CyperSecurity Minimizes safety risk / attacks
Redundant Ring, Fast Recovery
Supply voltage: 9 - 48VDC Redundant Input
Dim: 245 x 140 x 25 mm
Operating temperature: -40 - +75°C
DIN bracket , wall bracket
Weight: 1kg
Managed switch with 48 x RJ45 and 4 x SFP+ slots
Layer 2 switch
48 x RJ45 10/100/1000Mbit
4 x SFP+ slot for 10Gbit SFP fiber modules
Redundant Ring, Fast Recovery
IGMP Snooping, Spanning Tree Protocol
Fan with speed control
Dimensions: 440 x 330 x 44 mm (1U)
Weight: 4kg
Operating temperature: 0 - +50°C
Supply voltage: 100 - 250VAC
AUI converter for BNC cable, external supply
1 x DB15 Han to 10 Base-5 (AUI)
1 x BNC Jack for 10 Base-2
Max. Cable length: 500m thick coax, 182m thin coax
LED: Power, COL, LINK, TP / RCV
IEEE 802.3 10Base-5/2 Ethernet
0 to 55 ° C
10 to 90% ( Non-condensing)