

USB to 4 x RS422/485 converter
USB til 4 ports konverter med DB9 stil til DIN skinne montering.
- Med USB kabel og strømforsyning.
- Metal kabinet.
- 4 X RS422/485 porte
- Hastighed: optil 921.6 Kbpz
- 4 X DB9 hanstik
Serial to USB converter with 1 x RS232/422/485 port
Respects +/- 11volt data signals
Galvanically isolated on the RSxxx output
Self-tuner Baud Rate
Automatic direction control
Powered from the USB port
USB connector: Type B
Supports USB 1.1, 2.0 and 3.0
COM port: terminal block
The M485-USB-I is a cost-effective module for transferring serial data via USB. It allows you to connect your serial devices to systems that use a USB interface. Connecting the M485-USB-I to a PC gives you an RS-232/422/485 port. Contains a "Self-Tuner" chip that automatically sets the Baudrate and data format for the RS-485 network. Gets its power from the USB port and does not need any power adapter.
USB til 4 ports konverter med DB9 stil til DIN skinne montering.
Få 4 stk. RS232 porte på PC via USB porten
Forbind 4 x RS232 enheder til USB port
Metal kabinet og med vægmontering
Baudrate op til 115,2 kbit/s
Supporterer ikke hardware licens nøgler
Supporting Win10
Get a COM port on the PC via the USB port
USB to RS232 7 or 8 bit
RS232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Up to 921.6 kbit/s - FTDI chip
DB9 male
With thumb screws
Fits equipment with COM port
USE THE INCLUDED DRIVER!
USB-C to Straight-Through RS232 serial adapter
With DB9 male
With 3 x data monitoring LEDs (TX, RX, PWR)
COM port assignments are maintained across reboots
Max Baud Rate: 921.6 Kbps | 1, 1.5, 2 stop bits
Odd, Even, Field, Space, No Parity Mode
Hardware Flow Control (CTS/RTS and/or DSR/DTR)
Software Flow Control (XON/XOFF) | Chipset: PL2303-GC
Compatible with Windows®, Mac OS and Linux