Tilbehør, 10m kabel til ATOMUR SAT
Tilbehør, 10 m forlængerkabel til ATOMUR-SAT
Subcategories
Tilbehør, 10 m forlængerkabel til ATOMUR-SAT
temperatur og fugt føler, kan måle i vådt miljø
Sensor registreres automatisk (plug-and-play)
Længde: 2,3 m med RJ45 interface
-20 ° C til +80 ° C
Box temperature and humidity sensor for wall mounting
Sensor detected automatically
Can be connected with RJ45 STP cable up to 40 meters from the control
Temperature and humidity range: -20 ° C to + 80 ° C, + / -0.5 ° C, 0 to 90% rH, +/- 3%
Temperature sensor +/- 0.5 ° C, humidity +/- 3%,
Sensor is automatically detected by equipment
Length: 2.3 m with Mini-DIN connector
Accessories for: GUDE NPOWER , GUDE PDUs, Remote Control
12 ports PDU with individual on / off and individual and overall power meter via network
19 "1U rack mount
Integrated power measurement and monitoring per power outlet
User interface via web browser with Password
Scheduled on / off per port
Programmable sequential power up
8 x Schuko outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping off & nbsp; each connected PC
SNMP Get / Traps and Email Support
Supports Iphone and Android
4 ports PDU with individual power on / off and total current meter via network
1 x Alternative Type E connector (CEE 7/3) max 16A
User interface via web browser with Password
Programmable sequential power up 4 x Schuko outputs type F, max. 16A
4 x Watchdog with ping of & nbsp; each connected PC
SNMP Get / Traps and Email Support
Supporting Iphone and Android
8 Port Networked PDU with Individual On / Off
19 "Rack Mount, 1U
User Interface via Web Browser with Password
Scheduled on / off per port
Programmable Sequential Power Up
8 x IEC C13 outputs, max. 10A - front mounted plug
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping of each connected PC
SNMP Get / traps and e- mail support
Supports Iphone and Android
12 ports PDU with individual on / off with individual and overall power meter via network
19 "1U rack mount
Integrated power measurement and monitoring per output
User interface via web browser with Password
Scheduled on / off per port
Programmable sequential power up
8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping off Every Connected PC
SNMP Get / Traps and Email Support
Supports Iphone and Android
20 ports PDU with individual and total power meters via network
Integrated residual current measurement type A
User interface via web browser with Password
16 x IEC C13 outputs 10A
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support
7 ports PDU with overall power meter via network
can measure residual current measurement
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C13 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for external sensor, temperature, moisture, hPascal
SNMP Get / traps and e-mail support
20 ports PDU with individual and total power meters via network
User interface via web browser with Password
16 x IEC C13 outputs 10A & nbsp;
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support
7 ports PDU with overall power meter through network
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C7 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for remote sensor (temperature, humidity, hPascal
SNMP Get / traps and email support
4 ports PDU med samlet strømmåler via netværk
Med reststrømsmåling type A.
19" rackmontering, 1U
Måling af energi og elektriske dimensioner
Integreret Hotswap skuffe til udskiftning af processor/strømforsyning under drift
Måling af 2 resp. 4 separate faser
4 x IEC C13 udgange 14A
3 x RJ45, LAN og Sensor
4 x IEC C20 Strømforsyning 16A
SNMP Get/traps
4 ports PDU med samlet strømmåler via netværk
Med reststrømsmåling type A.
19" rackmontering, 1U
Måling af energi og elektriske dimensioner
Integreret Hotswap skuffe til udskiftning af processor/strømforsyning under drift
Måling af 2 resp. 4 separate faser
4 x IEC C13 udgange 14A
3 x RJ45, LAN og Sensor
4 x IEC C20 Strømforsyning 16A
SNMP Get/traps
8 port PDU with individual on / off and overall fuel gauge via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up to 8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android
8 port PDU with individual on / off and overall energy measurement via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up
8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
8 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android
4 Port PDU with individual on / off and overall fuel gauge via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up to 4 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
4 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android
4 Port PDU with individual on / off and overall energy measurement via network
Network Monitoring, for example. PRTG, Icinga, Nagios, Power IQ, Tivoli
19 "rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with password
Scheduled power on / off per port
programmable sequential power up
4 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with an alarm
4 x Watchdog with ping to each connected PC
SNMP Get / traps and e-mail support
Supports iPhone and Android
12-port PDU with individual on/off and integrated power meter via network
Network monitoring with e.g. PRTG, Icinga, Nagios, Power IQ, Tivoli
19" rack mount, 1U
1 x C20 input 230V, 16A
User interface via web browser with Password
Scheduled on/off per port
Programmable sequential power up
12 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature/humidity sensor with alarm
12 x Watchdog with ping for each connected PC
SNMP Get/traps and email support
Supports iPhone and Android
NTP Server - Atomic clock for 19 rack mounting.
Signal from DCF77 in Frankfurt (77.5kHz).
Rod antenna with 5 meter cable with BNC male
Additional antenna cable 50 ohm, BNC male/male
Purchase BNC-SAMLE
With network port and serial port
1U for rack mounting
Power is supplied from 230VAC.
NTP Server - Atomic clock - radio transmitter in Frankfurt DCF77 signal
Standalone NTP time server
Dynamic IP address from DHCP or manual selection of IP address
Antenna is active ferrite root antenna - included
LCD display for date and time
Built-in battery back up RTC
Signal strength display
Configuration via Web browser, Windows or Linux tool
Size on Hole for Mast: 4x5 cm
Minimum holes for mounting: 0.5 cm
between size holes for mounting: 1 cm
largest hole for mounting: 2 cm
Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C13, 10A / IEC C19, 16A
1 input „von USV“ IEC C14, 10A / IEC C20, 16A
4 x IEC C13 udgange 14A
3 x RJ45, LAN og Sensor
1 x IEC C14 10A/ IEC C20 16A Strømforsyning
Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C19, 16A
1 input „von USV“ IEC C20, 16A
6 x IEC C13 udgange 10A
1 x IEC C20 16A Strømforsyning
Lavt internt strømforbrug
30 meter kabel til GPS antenne
GPS controlled time server for networking
NTPV4 protocol
GPS Timing at satellite lock: 15nano seconds
16 channel receiver that reduces the risk of signal loss
10 / 100baset Ethernet
HTTPS, HTTP, SSH, SCP, SNMP V1 / V2 / V3, SFTP, FTP, DHCP, DHCPv6.
SNMP V3
Linux Core
Low power consumption Only 7W
230vac 50-60Hz 0.1A
Operating temperature 0 - 50 °
comes with multi-antenna, wall mounting and 30 M RG58 antenna cable
Atomic clock with time from GPS satellites
NTPv4 Stratum-1 GPS Network Time Server.
GPS accurate to 15 nanoseconds (GPS locked).
NTP accurate to 3 microseconds (GPS locked).
Synchronize more than 2 million clients with standard NTP polling frequency.
10/100 Mbit auto-sensing, auto-MDIX Ethernet port.
IPv4 and IPv6 internet protocols.
SNMP v3
Active GPS antenna included
10 meter coax cable included
Dimensions: 144 x 103 x 30 mm
Supply voltage: 7.5VDC / 1A
PSU included
3 x tænd/sluk, potentialfri relæ ouputs, 230 V AC, 16 A / 24 V DC, 10 A
1 x strømforsyning med 12-24 V AC / DC spænding
1 x RJ45 Ethernet
3 x Watvhdog til at overvåge forbrugere (ICMP / TCP)
1 Mini-DIN-stik til valgfri sensor eller seriel interface (RS232)
Programmerbar tænd / sluk-sekvens
SNMP Get/Traps (SNMPv1, SNMPv2c)
Understøtter Android og iPhone
Syslog og E-mail
DIN-rail montering i servere racks
The ideal choice for Server Room and Server rack monitoring.
4 x potential-free switching relay outputs - 36VDC / 3A switches
Large LED display for power measurement, IP address, sensor data and error reports
4 x Watchdog for monitoring connected PCs (ICMP / TCP)
12 x passive signal inputs - (contact inputs) for Phoenix plugs
4 x RJ45 for temperature / humidity sensors. RS232 / 485, 1 x RJ45 for LAN
Features, limit values, alarm receivers set up on the device via supplied software
2 x 12VDC power supply inputs (redundant)
PoE - Power over Ethernet for 2111-2 the model.
Free APP for Android and iPhone
SNMP Get / Traps (SNMPv1, v2c, v3)
BNC Extension Cable 10 m 50 Ω 2-wire cable
automatisk transfer switch (ATS) til skifte til en alternativ strømforsyning
Typisk overførselstid 7 - 10 ms.
Brugerflade via web-browser med Password
Programmerbar sekventiel power up
6 x IEC C13 udgange 10A
1 x IEC C19 16A
3 x RJ45, LAN og Sensor
2 x IEC C20 16A strømforsyning
SNMP Get/traps og e-mail support
Atomur- controlled GPS time server to the network 32
channel receiver which reduces the risk of signal loss
TCXO (Temperature Compensated X-tal Oscillator) in order to keep the time in the absence of GPS signal
10 / 100BaseT redundantly Ethernet
Low power consumption only 7W
230VAC 50-60Hz 0.1A
Operating temperature 0 to 50 °
Supplied with multi-antenna, wall mount and 30 m RG58 aerial cable
GPS antenne til udendørsmontering til ATOMUR-SAT-T/T+
Forlængerkabel til DCF antenne, 50 meter
4 x potential-free shutter release, & 230VAC / 16 A, & 24VDC / 10 A
8 x passive signal inputs - contact inputs
1 x RJ45 Ethernet
4 x Watchdog to monitor connected devices (ICMP / TCP)
1 Mini-DIN connector for optional sensor or serial interface (RS232)
Programmable on / off sequence
SNMP Get / Traps (SNMPv1, SNMPv2c), Syslog, e -mail
APP for Android and iPhone
2-color LEDs for status info on front
DIN rail mounting
Accessories
DCF 77 kHz rod antenna w/5 meter cable
For ATOMUR-SAT-T+
Must be mounted horizontally (landscape)
Must face south (Frankfurt, Germany)
Is sensitive to EMC noise which can interfere with reception
Active GPS signal amplifier with 8 outputs.
With TNC connector.
1U rack.
Anvendet example. to signal power several atomic clock-SAT TR / TRD time-servers
1 shift relay output (NO / NC), relay contact: 24V / 0.5A
1x on / off output, (PTR multiconnector)
Power supply 12VDC / 500mA included
1 x RJ45 Ethernet
APP for Android & amp; iPhone
SNMP Get / Traps (SNMPv1, SNMPv2c)
Syslog and Email support