![](https://www.danbit.dk/3503-large_default/antenne-til-atomur-sat-t-tilbehr.jpg)
![Monterings - vinkelbeslag...](https://www.danbit.dk/10566-home_default/monterings-vinkelbeslag-til-atomur-gps-antenne-atomur-ant-g-tilbehr.jpg)
Monterings - vinkelbeslag til atomur GPS antenne ATOMUR+ANT-G
Size on Hole for Mast: 4x5 cm
Minimum holes for mounting: 0.5 cm
between size holes for mounting: 1 cm
largest hole for mounting: 2 cm
GPS antenne til udendørsmontering til ATOMUR-SAT-T/T+
Size on Hole for Mast: 4x5 cm
Minimum holes for mounting: 0.5 cm
between size holes for mounting: 1 cm
largest hole for mounting: 2 cm
NTP Server - Atomic clock for 19 rack mounting.
Signal from DCF77 in Frankfurt (77.5kHz).
Rod antenna with 5 meter cable with BNC male
Additional antenna cable 50 ohm, BNC male/male
Purchase BNC-SAMLE
With network port and serial port
1U for rack mounting
Power is supplied from 230VAC.
Atomur- controlled GPS time server to the network 32
channel receiver which reduces the risk of signal loss
TCXO (Temperature Compensated X-tal Oscillator) in order to keep the time in the absence of GPS signal
10 / 100BaseT redundantly Ethernet
Low power consumption only 7W
230VAC 50-60Hz 0.1A
Operating temperature 0 to 50 °
Supplied with multi-antenna, wall mount and 30 m RG58 aerial cable
NTP Server - Atomic clock - radio transmitter in Frankfurt DCF77 signal
Standalone NTP time server
Dynamic IP address from DHCP or manual selection of IP address
Antenna is active ferrite root antenna - included
LCD display for date and time
Built-in battery back up RTC
Signal strength display
Configuration via Web browser, Windows or Linux tool
Active GPS signal amplifier with 8 outputs.
With TNC connector.
1U rack.
Anvendet example. to signal power several atomic clock-SAT TR / TRD time-servers