BNC male connector with screw clamp. BNC male for cable adapter with 2 screw clamps
BNC male connector extends through the two screw clamps.
Terminal boards are used eg. together with our many industrial cards for connecting external signals. Instead of connecting cables directly to plugs on the PC cards, it is often more convenient to use the screw terminals on an external terminal card.
Subcategories
There are 56 products.
BNC male connector extends through the two screw clamps.
VGA female connector with 16 pin screw terminal block
DB9F plint med ben 1-5 ledningen genom
DB9 HAN connector
RS232 with terminal block 1-9 screw terminals
Can be used for RS232/485/422
With plastic protection Open/close
With thumb screws
Power Jack male connector 5.5/2.1mm screw terminal block.
Connects loose wires.
Forlængerkabel med DB37 han til DB37 hun stik
AWG28
Guldbelagte stik
Cable with DB37 male / male
AWG28
Gold-plated connector
For terminal card
Gray
1.8m
100 screw terminal terminals
1 x 100 pin SCSI-II connector
For DIN rail mounting
Cable available as an accessory
158 x 120 x 52 mm (B x L x H)
Double terminal board with 2 x 20 screw terminals
2 x 20 pole IDC male connector
For DIN rail mounting
Incl. x 1m flat cable IDC20 female to IDC20 female
148 x 70 mm (W x L)
Terminal board with 24 x opto-insulated inputs
1.4 m cable with 2 x IDC50 connectors included
Dimension: 213mm x 132mm
Interface Terminal board with 24 x power relay
8 switch relay
16 x connect relay
incl. 1.4 m cable with 2 x IDC50 connectors
Dimension: 130 x 220 mm
24 channel relay output terminal card
24 x relay relay
50-pin Opto-22 plug
Dimension: 220mm X 130mm
Terminal cards with 25 and 10 screw terminals
DIN-Rail Mounting
9-pin D-sub connector
25-pin D-sub connector
Pin to Pin screw terminal
Dimension: 148mm x 76mm
Terminal card with screw terminals
IDC 34 male flat cable of 0.5m included
For DIN rail mounting
195 x 90 mm (W x L)
Active Terminal Cards
Input Levels: Logical 0: 0-0.8, Logical 1: 5 - 30 V
8 End Phrases 250 VAC 6 A
DB25 Male
30 x 100 x 160 mm
Adlink DIN-50P-01
Terminal Boards
On-board Connector
1 x 50-pin SCSI II
103 x 85 x 43 mm (W x L x H)
Adlink DIN-68S-01
Terminal Boards
On-board Connector
68-pin SCSI-II female
103 x 85 x 46.2 mm (W x L x H)
Adlink DIN-50S-01 (G)
Terminal card with screw terminals
50 pin SCSI II female connector
For DIN rail mounting
125 x 85 x 50 mm (W x L x H)
Terminal card with screw terminals
DB37 male / female cable of 1.8m included
For DIN rail mounting
103 x 85 x 50 mm (W x L)
Adapter med DC hun 2.1mm til DC han 2.5mm tilpasningsstik