Information on USB 3.0
At the end of 2008, USB 3.0 (Super-Speed) was clarified to a transfer rate of 5 Gbps. It is 10 times faster than USB 2.0. Products using USB 3.0 were presented in late 2009 and early 2010.
USB 3.0 supports USB 1.0, USB 1.1 and USB 2.0. This will provide a smooth transition from the current USB 1.0 and 2.0 to USB 3.0. The speed increase comes from extra pins on the USB 3.0 connector. USB 3.0 has 9 pins as...
Information on USB 3.0
At the end of 2008, USB 3.0 (Super-Speed) was clarified to a transfer rate of 5 Gbps. It is 10 times faster than USB 2.0. Products using USB 3.0 were presented in late 2009 and early 2010.
USB 3.0 supports USB 1.0, USB 1.1 and USB 2.0. This will provide a smooth transition from the current USB 1.0 and 2.0 to USB 3.0. The speed increase comes from extra pins on the USB 3.0 connector. USB 3.0 has 9 pins as opposed to USB 2.0 which has only 4 pins. The extra leg also means that where USB 2.0 delivered 500 mA, USB 3.0 can deliver 900 mA. It may eliminate the need for more power supplies that were previously needed due to this limitation.
Subcategories
There are 103 products.
USB ports: 3 external plus 1 internal
OS: Windows 98SE, 2000, XP, Vista and Linux
Terminal Block, 3 Way, Screw Down Terminals
REMAINING STOCK
FireWire IEEE1394a: 3 external + 1 internal (6-pin connector)
Limited number of
NOTE! The length of the cable is much longer than the USB specification.
Lengths beyond 6 meters can be critical and function cannot be predicted
This applies to both data transfer and voltage loss.
30 meter USB cable with USB-A male and USB-A female connector
Possibly. only for keyboard and mouse.
AWG28
USB3.0
Gold plated connectors
Black
3 meter USB cable with USB A male and USB A female connector
AWG28
USB3.0
Black
Mode: Print server, Virtual USB
4 x USB-A female (3 x on the front, 1 x on the back)
2 x RJ45 Ethernet
Power supply: 5VDC 2A included
DC Jack: 3.5/1.3 mm
Operating temperature: 0 - 50°C
OS SUPPORT: Windows 10/11, Windows Server 2012R2/2022, Linux 4.9+, Mac OSX (see description)
Mode: Print server, Virtual USB
4 x USB-A female (3 x on the front, 1 x on the back)
2 x RJ45 Ethernet
Antenna for Wi-Fi
Power supply: 5VDC 2A (supplied)
Operating temperature: 0 - 50°C
OS SUPPORT: Windows 10/11, Windows Server 2012R2/2022, Linux 4.9+, Mac OSX (see description)
4-Port USB2.0 extender up to 480Mbps
Supporter USB 2.0 / 1.1
USB 2.0 up to 480Mbps
USB 1.1 up to 12Mbps
Operating temperature: 50C 0C two
Multimode Fiber extension up to 500m
Electrical isolation
24VDC PSU attached
4 port USB 3.0 HUB with DIN rail mounting
Can be powered from 7-24 VDC
Provides good noise immunity
Up to 900mA per port. by external supply.
USB cable for PC included
Voltage ONLY from terminal - int. jumper on DIS
Voltage from USB and clamp - int. jumper on ENA
4 x USB-A 3.0 female
1 x RJ45 10/100 Ethernet
Power supply: 12VDC, 1A, terminal type (supplied)
Power consumption: 500mA
Operating temperature: 0 - 55°C
OS SUPPORT: Windows XP to 10, Windows Server 2003 to 2016
NOTE: PWR only lights up when network is connected
USB 3.0, 2.0, 1.1
Max. Distance 100m
Transmission media CAT6a / 7
power required by both REX LEX
USB 3.1A
USB port 4 (built-HUB)
USB Review 5 Gbps
Power requirements 24V DC, 1A
4 port USB 3.1 Gen 2 Hub
2 x Type-A, 2 x Type-C, 1 x Type-C Upstream
For DIN-Rail or Desktop Mount
Supports: 10Gbps (SS +) , 5Gbps (SS), 480Mbps (HS), 12Mbps (FS), 1.5Mbps (LS)
Power supply: + 7 ~ 24VDC (12V, 1A included) via DC plug or terminal block
Power per port: 0.9A at the same time
Backwards compatible with: USB 1.1, 2.0, 3.1 Gen 1
Temperature range: 0 ~ 55 ° C
Humidity: 5 to 95% RH
Dimensions: 151.1 x 62 x 34 mm
Extremely fast USB extender - ideal for USB cameras and the like.
USB 3.2 Gen 1 extender with data rate up to 5 Gbps
Supports all USB 3.1, 2.0, 1.1 units while full bandwidth
Set of transmitter and receiver with the 4 port hub
4 x USB 3.2 ports Gen 1
Power from the USB port: up to 1.2 A (6 W) per. USB port
2 x 24VDC 1A / 2,7A power supplies included
100/1000 Ethernet channel; LAN through
Single cable, CAT 6a / 7 up to 100 m
Point-to-point connection
Supports all USB transfer types (control, interrupt, isochronous and bulk)
Optimized for camera - and video recording devices
4 port USB 2.0 hub with blue lighting for each port
4 x USB 2.0
WITHOUT charging function on the USB port!
Plug and play
OS support: Windows 98 SE, 200, Me, XP, Vista, 7, 8, 10, Mac OS
maximum 480 Mbps
USB 3.1-C to UDB 3.0 - 10 Gbps
4 port USB HUB
USB version: 3.0
Cable length: 0.3m
Support: Mac/Windows/Android
Support: Mobile Phone/Tablet/USB Driver/OTG/PC/Laptop
Data transfer: 1.5 Mbs, 12 Mbs, 480 Mbs for 4 x USB2.0 ports
RJ45 on Transmitter and Receiver
Cat 5e/6 or more (straight through)
Use ONLY quality patch cord
Up to 120 meters
No driver needed
only 5V voltage on the transmitter (PSU included)
Receives the power supply via network cable
NOT RECOMENDED FOR USB CAMERA!
STOCK SALE
Internal USB2.0 hub in frame
for 3.5" or 5.25" cutout
4 USB ports
480 MB / second
Plug & Play
Industrial USB HUB with YOUR rail mounting
Can be powered from 7 - 24VDC - provides incredibly good noise immunity | DC24V400MA-D
Dimensions: 115 x 65 x 26mm
Steel cabinet, with flange for wall mounting
4 ports USB 3.1 hub with 4 x USB-A female and 1 x USB-C female (Upstream) connector
USB-C male to USB-A male cable included
5VDC EU power supply co-fender
Supports USB 3.1 Gen2 up to 10 Gb / s
Icron USB Extension - Local Extender device and Remote Extender device
USB 2.0: Up to 480Mbps
USB 1.1: Up to 12Mbps
1 x USB-B (LEX unit)
1 x RJ45 (LEX unit) to 4 x USB-A (REX device)
1 x RJ45 (REX device)
Dimensions: 100mm x 76mm x 26mm
up to 600mA to each USB port (REX device)
Up to 100 meters above the UTP / STP to 4 x USB - version: USB 1.1 and 2.0
5VDC / 3A PSU (REX device)
Operating temperature: 0 ° C to 50 ° C,
