USB converters / USB extenders / USB adapters / Firewire

Include a transmitter and receiver
USB 3.0 type-A (not compatible with USB 1.1, 2.0)
Up to 250 meters in distance (single or multimode)
Duplex LC (single or multimode) < br> USB 3.0 5Gbps bandwidth
Plug and play (no driver or software needed)
Optical wavelength: 1310 nm / 1550 nm
Material: Aluminum
Dimensions: 104 x 104 x 28mm Weight
: 0.7 kg
Supply voltage: 5V DC
Operating Temperature: 0 to 50 degrees

REMAINING STOCK

Extends USB2.0 over Multi Mode LC fiber cable
Up to 200 meters
Can be used for USB 2.0/1.1
Plug-and-play (no driver installation required)
Webcam Resolution up to 1080p@24Hz
Transfers data up to 100 Mbps
Transmitter: DC 5V from USB Port
Receiver: DC 5V Adapter

Point to point USB extender over fiber cable.
Up to 350mets.
Select OM3 Multi Mode Fiber with LC connector.
TX: Micro-B USB, RX: Type-A USB.
Compatible with USB 3.2 Gen 1 / 2.0 / 1.1.
Plug-and-Play - no drivers.

Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting

Icron USB Extension - LOCAL and remote unit
Up to 100 meters over UTP / STP
2 x USB port - Version: USB 1.1 and 2.0
24VDC / 1A PSU incl. the remote unit
PSU kan be connected two LOCAL or remote unit
Support up to 11 USB units from 3 USB Hubs

Point to point USB extender over fiber cable.
Up to 350mets.
Select OM3 Multi Mode Fiber with LC connector
TX: Micro-B USB, RX: Type-A USB.
Compatible With USB 3.2 Gen 1
Plug-and-Play - no drivers.

CAN Bus to USB Tester
Interface: Open 6
2 x CAN Channels
CAN Standard: ISO 11898, Can 2.0a, Can2.0b
CAN Baudrate: 5K - 1Mbps and most widely used Baud Rate
Isolation: 1500V
USB: 1.1, 2.0
Support Software: _CAN Tools, CAN Test, CAN Pro.
Operating System: Windows 2000 / XP / 2003/7/8/10
Supports VC, VB, C #, LabVIEW, LabWindows, Delphi7 OA
Operating temperature: -40 - + 85 ℃
Measure: 103 x 64 x 23 mm

Moxa Uport 1410

Limited number

Konverter fra USB til CAN bus
Tilsluttes via USB
Supporterer CAN 2.0A / 2.0B, op til 1 Mbit/s
Drivers til Windows, Linux and Mac OS X
16kV ESD surge protection
2.5kV isolation
Til væg eller DIN skinne montering

4 port USB 2.0 Extension, 150 meters over UTP / STP
USB 2.0 to 480 Mbps
Supply voltage from USB port

REMAINING STOCK

Optically isolated USB hub with 4 ports
Protects USB devices and PCs from overvoltage
4000 VAC isolation on the USB port for the PC.
Ports are ESD protected
Suitable for medico environment

2 X USB-A 3.0 SuperSpeed ​​​​
1Gbit LAN (10/100/1000Mbit)
USB Over IP (with IP interface)
Windows 2000, XP, Vista, 7~10
macOS x10. 5~10.13
Power supply: 5VDC 2.5A (supplied)
Supports some USB License Dongles - install SW

1 X USB-A 3.0 SuperSpeed ​​​​
1Gbit LAN (10/100/1000Mbit)
USB Over IP (with IP interface)
Windows 2000, XP, Vista, 7~10
macOS x10. 5~10.13
Power supply: 5VDC 2.5A (supplied)
Supports some USB License Dongles - install SW

Få en COM-port på PC via USB porten

MOXA USB to RS232/422/485 converter.
Kompatibel med USB 2.0
Software selectable RS232, RS422, 4-wire RS485 and 2-wire RS485
Certified drivers for Windows, WinCE 5.0 and Linux
15 KV ESD protection

Supporting Win10

Isolates and protects USB device from USB host
Electrical insulation up to 3000V both directions
Common mode filtering on all data lines
Output voltage: 5V 420mA
USB2.0 12 Mbps or USB1.1 1.5 Mbps with jumper
No software or drivers required
Short circuit protection
LED for power indication
Operating temperature: -40 - +70°C
Robust metal housing with DIN rail mounting
USB cable is securely locked to the case

Get a RS485 / RS422 port on the PC via the USB port
Software for choosing a fixed COM port - very useful
Compatible with USB 2.0
12 Mbps USB data rate
921.6 kbps maximum baud rate
Driver for Windows, WinCE, and Linux
Mini DB9 male for terminal block adapter
LED for indication of USB and TxD / RxD activity
15 kV ESD protection for 2 kV optical isolation

REMAINING STOCK

USB 3.0 booster (extender) cable - 15 meters
SuperSpeed USB 3.0 male (type A) to USB 3.0 female (type A) connector
Powered from USB port or power supply
Transfer speed: up to 5Gbit/s (625MB/s)
OS support: Windows 2000, XP, VISTA, 7, 8, 10 & MAC

Connect CAN Bus equipment over USB ports
supports CAN 2.0A and CAN 2.0B protocols
with 2.5kv isolation from Can to USB port
supplied via USB. Max. 250MA @ 5V DC
OS Support: Windows 2000 Up to Windows 10, Linux Kernel 2.6+, Mac OS X