32 kanals logikanalysator til USB 2.0
Tilsluttes USB porten på pc’en, hastighed op til 250MHz
DANBIT has a large selection of test equipment and in this category exists;
Fiber tests, cable tests, camera tests, network tests, PoE tests, RS232 tests, screen tester, microscopes, power meter, multimeter, signal strength meter, range finder, thermal camera, universal applications, IC programs, logic analysis and analysis software.
Subcategories
There are 39 products.
Tilsluttes USB porten på pc’en, hastighed op til 250MHz
Protokolanalyse for UART, I2C og SPI, hastighed op til 200 MHz
2.5 1.25mm adapter
SC, ST, FC, LC
400x zoom
3xAAA battery
0.6kg
Laser Safty Filter
Fiber tester shows power and loss in a fiber cable
Used as remote unit for TEST-FIBER-PM-LS
Wavelength: 850nm, 1310nm, 1550 nm
Battery: 2 x AAA (included)
The fiber cable tester for LC / MU connectors.
This type of fiber has a tip diameter of 1.25 mm
Test residue tip suitable for fiber cables with a tip diameter of 1.25mm
Transmitter visible light through the fiber
Tester fiber cable with LC connectors at both ends
Tester Pigtail fiber with LC in one end
Cable will light up when there is a rupture or crack.
in a healthy cable the light is seen only in the opposite end of the fiber cable.
Cable tester for fiber SC and RJ45
RJ45, RJ11 & SC cable tester
Up to 300m cable length RJ45
Cable insulation and crimping cable
Cable termination of RJ11, RJ12 and 8 pins RJ45
Cable review tests with LEDs included
Multimeter with capacity measurement
This is a discontinued model and is EOL!
Cannot be interfaced to PC! (although there is a port for it).
Limited stock!
Simple and compact digital multimeter with LCD display
DCV measuring range: 300V, 200V, 20V, 2V 200mV
ACV measuring range: 300V, 200V
DCA measuring range: 200mA, 20mA, 2mA, 200uA
Resistance measuring range: 2MΩ, 200KΩ, 20KΩ, 2KΩ, 200Ω
Diode / Continuity measurement
Battery: 9V (included, not installed)
Multimeter with clear multi display
Note does not have an interface for a PC (although there is a port for it)
EOL product limited stock
DC Voltage: 400mV 0.5% +2dgts 4V to 1000V 0.8% +2dgts
AC Voltage: 4V to 750V 1.5%+3dgts(40~500)
DC Current: 400 to 400 1.0%+2dgts 20A 2.5% +3dgts
AC Current: 400 to 4 1.0% + 5dgts(40~500), 40 to 400 1.5% +5dgts(40~500), 20A 3.0% +4dgts(40~500)
Resistance: 400 to 400, 0.8% +2dgts, 4 1.0% +4dgts
Capacitance: 4 to 400 2.0% + 5dgts, 4 to 40 3.0% + 5dgts 200 5.0% + 5dgts
Frequency: 4 to 4 0.1% + 1dgts
Temperature: -40C ~ 20C 3.0% + 5dgts, 200C ~ 1200C 3.0% + 2dgts
Logic: Three logic level (Low,---, Hi)
Continutiy: Buzzer sounds of Resistance less than 800
Diode: Yes
hFE: Yes
Signal_out: 1 ~ 10 (13 steps)
Measurement range: 0.00-14.00pH
Resolution / accuracy: 0.01pH
Calibration: Automatic 3-point calibration 6.8 & 4.00 & 9.18pH
Temperature: 0-60 ° C
Humidity: 100%
Simple and compact digital pen type multimeter with LCD display
DCV measuring range: 600V, 200V, 20V, 2V 200mV
ACV measuring range: 600V, 200V, 20V, 2V
DCA measuring range: 200mA, 20mA
ACA measuring range: 200mA, 20mA
Resistance measuring range: 20MΩ, 2MΩ, 200KΩ, 20KΩ, 2KΩ, 200Ω
Diode / Connection measurement
Built-in LED lamp
Battery: 2x1.5V AAA (not included)
Dimensions: 225 x 38 x 26 mm
ESD Bracelet for discharge of static electricity
ESD jordingsudstyr.
ESD måtte til elektronikarbejde.
500 x 700 x 2mm ESD sikret måtte.
Anbefales at bruge ved PC samling og reparation.
ESD Armbånd til afledning
Cable test transmitter and receiver for single mode fiber optic
Fiber cable tester for SC / FC / ST / E2000 plug types
The tip of these fiber cables a 2.5mm
The tester's tip fits fiber ends with a diameter of 2.5mm
Sending visible light through the fibers.
In case of fracture, the fiber cable will light up on the spot.
By healthy cable, light is visible at the opposite end of the fiber
Fiber Tester. Measures how much loss there is in a fiber cable at the selected wavelength
3 x SFP ports (2 x Light Source, 1 x Power Meter)
SFP modules included:
650mm FP SC SFP
850mm VCSEL SC SFP
1310mm FP SC SFPT
1550mm FP SC SFP
FiTs Meter Module SC 850/1310/1490 / 1550mm
Purchase remote module TEST-FIBER-PM for measuring on mounted fiber cables
Måling og skriftlig rapport pr. kabel, 1-5 stk
Måling og skriftlig rapport pr. kabel, 6-49 stk
Måling og skriftlig rapport pr. kabel, 50 stk og derover
USB 2.0
Basic unit without IC adapter
Supports many house types according adapter
Programmer til EPROM/EEPROM m.fl. 40 bens sokkel
Engangsposer, vand- og støvtætte til
Tester Cat. 5, 5E, 6 and 7 network cables
Accuracy: ± 2m for cables under 10 meters, ± 5% for cables over 10 meters.
Test length for cables: 1 ~ 300 meters.
Tone Generator: Single / dual digital tone
Operating temperature: 0 ° C - 50 ° C
Storage temperature: -30 ° C - 50 ° C
Humidity: 10% - 90%