Bonprinter papir. Penbox 112 x 20ml. Kasse med 10 ruller
Paper- Printer Accessories - Thermal
Subcategories
Paper- Printer Accessories - Thermal
Active RFID Tag with hole for pendant + vibration sensor
2.45 GHz read and write
Transmission distance 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified
Active RFID Tag with key ring and vibration sensor
2.45 GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless tag programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified
MDB Cable with RS232 Converter
for integrating Pay Terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm
1D, 2D barcode reader
Wireless 2.4GHz (RF dongle) or USB-A for USB-B cable
Reading distance: 10-500mm
Operating time: Approx. 16 hours
Recharge time: Approx. 6.5 hours via USB-B
Memory: 512K (over 5000 barcodes)
Dimensions: 150mm (L) x 70mm (W) x 95mm (H)
Trigger to open cash drawers with Epson, Citizen or Star interface
Genopladeligt Li-ion batteri, 3,7V, 1620mAh
Active 2.45GHz RFID TAG
2.45GHz read/write
Range up to 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
Wireless programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
Built-in SOS button
Active RFID Take with key ring pendant
2.45GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless TAG programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified
Kan indsætte diverse formateringstegn, f.eks. linjeskift.
Programmerbar magnetkortlæser med PS/2 interface. Lysdioder sikrer optisk kvittering, akustisk lydsignal ved korrekt aflæsning af magnetkort.
Opsætnings softwaren virker kun på en Windows XP pc der har en PS2 keyboard port
MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232
RFID 125kHz reader with RS232
EM 4xxx Standard Tag (40 bit HEX)
Mounting in Ø 31 mm Hole
Length from Resess: 27 mm
Resess Width: 40 mm
RS232 , 9600, N, 8, 1
9 - 12VDC / 50mA
Temperature: -10 - + 70 ° C
Material: PBC
IP54 from front
Tilsluttes RS232 (serieporten)
Mifare Classic1K TAG
designed as key ring
Bag with 20 pieces.
reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 Blocks / 16 byte
UID code is factory programmed - cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
Dim: 40 x 32 x 4 mm
Trigger til at åbne pengeskuffer med Epson, Citizen eller Star interface
MDB Male and Female
DEX Male and Female
module with eight relay output
5VDC from optically isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A - non inductive load!
Zebra 8000T Z-ENDURE
20 pcs. Mifare Transponder / TAG to Keychain
Mifare Classic 1K RFID TAG
Reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed
Gray key ring
Frequency: 13.56MHz
Material: ABS, IP68
5V relay print
GND, VCC, IN
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A
5V relay print
GND, VCC, IN
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A
S/H bånd til 1000 kort (til PRINT-ID/PRINT-ID-MAG)
Evolis R2011
Module with 2 relay outputs
5VDC from optically isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A - non inductive load!
REMEMBER THE RIGHT CABLE FOR YOUR NAYAX TERMINAL!
Tilbehør til MCRW123O+USB
Active RFID tag bracelet 2.4 - 2.48GHz
Output power -6dbm
Active operating mode
3 year battery life (depends on usage, can be changed)
0-80M distance
IP68
Weight: 40g
Operating Temperature: -40 ℃ ~ + 60 ℃
Dimensions: 250mm × 31mm × 15mm (L × W × H)
Module with 1 relay output
5VDC from optically isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A - non inductive load!
Net adapter 12V, 1A - Switch mode
Output: 12VDC / 1Amp
230VAC input
Power plug: 5.5 / 2.5 mm
Cable color: + Red, - White
RS232 Cable for Bargun Omni
Cable Length: 2Meter
DC Box located 20 cm from DB9 She connector.
125kHz RFID TAG with screw hole
50 mm diameter x 2.5 mm
Suitable for guard rounding as a checkpoint
ASK 64 bits,
Manchester encoding; 10 digits in HEX
With RFID, the code reads Decimal: 12 digits
RFID TAG mounting on metal
Passive 865 MHz RFID PVC Tag (860 - 960MHz)
0 - 5 meters depending on antenna Gain
TAG Format 138 x 30 x 5 mm
protocol: ISO 18000-6C (R / W) - 96bit EPC / 512bit User
TAG ID (UID) in the second sector on the roof.
125kHz RFID TAG
For Keyring
Waterproof
Durable
Gray
Dimensions: 40 x 30 x 7 (L x W x D)
125kHz EM TAG with magnetic stripe
credit card format
0.8 mm, incl. Magnetic stripe
TAG is waterproof
Passive 865 MHz RFID PVC Tag
0 - 2 meters Depending on Antenna Gain
TAG Format 55 x 10 x 1.6 mm - for textile - Flexible
protocol: ISO 18000-6C (r / W) - 96bit EPC / 512bit User
TAG ID UID in the second TAG sector.
Weight: 1 g
Operating temperature: -20 - +50°C,
Dimensions: 119.6(L) x 76.6(W) x 15(H)mm
TAG, cylinder, black
4.5 x 30 mm
TAG is waterproof
Dallas iButton tag med unikt indkodet nummer
TAG, round piece, self-adhesive
1.7 x 25 mm
TAG is waterproof
Take, credit card size 0.8mm.
Tags are waterproof
125 kHz RFID TAG
Dim: Ø25 x 3 mm
TAG is waterproof
Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Dim: 85.7 x 54 x 0.8 mm
125kHz RFID TAG
credit card size 0.8 mm
sequential ID
TAG is waterproof
Passive 865 MHz RFID PVC TAG
0 - 2m depending on antenna gain
TAG format - Adhesive Paper
Protocol: ISO 18000 6C (R / W) - 96bit EPC / 512bit user
TAG ID UID in other sector.
Dimensions: 121 mm X 44 mm X 0.4 mm
weight: 2 g
Operating temperature: -10 to +60°C.
Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Can't change
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Numbered - printet on the card
target: 85.7 x 54 x 0.8 mm
125kHz RFID TAG for adhesion
Dim: 20 x 3 mm
3M tape
black
TAG is waterproof
Frequency: 860-960MHz
PVC / PET
ISO18000-6C (EPC GEN2)
Dimensions: 86x54x0.8mm
Operating temperature: -25C - 85 degrees
125kHz RFID TAG
Designed as screw
plastic
9.5 mm Thread
12 mm head
19 mm long.
TAG is waterproof
Ceramic UHF Take against metal
survive Temp: -40 - + 250 ° C Short-lived
can autoclaved several times
operating temp: -40 - + 85 ° C
Alien Higgs-3 chip < Br> Objective: 10 x 5 x 3 mm
Weight: 0.8g
reading distance: Up to 3 meters (1 watt reader)
suitable for location against metal - can give better reading distance
read / write : 100,000 times
Data Storage: Over 10 years
IP68
Passive 865 MHz RFID PVC tag (860 - 960MHz)
0 - 10m depending on antenna gain
ISO short format 86 x 54 x 2 mm - card holder available
Protocol: ISO 18000-6C (R / W)
Card ID in other sector.
Operating temperature: -25 ℃ ~ + 65 ℃
Tag, key ring
target: 35 x 2 x 4 mm
with engraved UID code
tag is waterproof
Passiv 865 MHz RFID holder til RFID865TAG-W
Passive 865 MHz RFID PVC Tag
0 - 10 m depending on antenna Gain
ISO Short format 86 x 54 x 0.5mm
protocol: ISO 18000-6C (R / W) - 96bit EPC / 512bit User
Tag ID UID in the second sector.
Read and write: 100,000 times
Material: Paper
Operating temperature: -20 - + 85 ° C
Mifare Classic 1K RFID Tag
Reading distance: 0 - 5 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
blue key ring
Frequency: 13.56MHz
Material: ABS, IP68
DIM: 40 x 32 x 4 mm
125kHz TAG
rectangular, transparent plastic
Dim: 20 x 25 x 0.7 mm
TAG is waterproof
125kHz RFID TAG
For key ring
Dimensions: 37 x 30 x 8 mm
with printed UID code
TAG is waterproof
UHF RFID Take with Strip
Frequency: 860-960MHz
Blue
Width 30 mm
Length Sign 110 mm
Height / Thickness 12.5 mm
Length Strips 215 mm
Total Length 325 mm
ISO magnetic card with High Coat magnetic stripe.
Can be delivered with color printing for extra payment.
Cards with the same print for quantities of 25 or more. and up.
Price is per piece.
RFID UHF 865MHz PVC Bracelet
One-off closure
Adjustable size
Waterproof
Operating temperature: -30 ~ 75 ° C
White
Width 2.7 mm
Length Shared 100 mm
total length 278 mm
Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required
NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!
Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)
BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!
Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)
Top-class scanner for item and product registration
Professional Multi Reader and Writer for RFID and Barcode 1D/2D/QR etc.
Powerful circular polarized antenna
UHF RFID read and write up to 25 meters, depending on TAG
UHF TAGs are passive - without a battery
Reads NFC and Mifare TAGs
Reads up to 900 TAGs per second
Barcode reader CCD: 1D, 2D, QR codes
Access to the APP Center with programs and tools
13MP camera with flash
5.2" Display - 1920 x 1080p with touch
Communication: dual band Wifi, Bluetooth, 4G LTE
Dual SIM or Single SIM and Micro CD card
GPS/AGPS, GLONASS
Battery: 8000mAh Li-ion (approx. 12 hours of operating time)
IP65 tight. 1.5 meter drop tested
Operating temperature: -20 - +50°C
125kHz RFID TAG as bracelet
diameter: 68mm
Blue (red on order - Contact us)
Net weight: 9.3 g
EM Standard: TK4100, ICODE2 chip
material : Silicone
operating temperature -40 - + 100ºC
storage temperature -40 - + 120ºC
Universal electric car charging stand for all EV vehicles
Allow two electric cars to charge at the same time
Smart design
Dynamic management of charging
Interface protocol: OCPP 1.6
Payment for parking and charging by payment card
Monthly fees apply
AC Input 230-400 VAC +/- 10 (2 or 3 phase)
Total Power output 2 x 22kW / 2 x 32A Max (load sharing)
Payment: Payment card, Google Pay, Apple Pay (option: MobilePay)
Communication: 4G
IP degree: IP55
Operating temperature: -25 C° to 55 C°
Dimensions: 520 x 360 x 260 mm
Charger cable not included. The user uses the cable that comes with their car.