RFID reader 125kHz over network, TCP / UDP. Supports different subnet. TCP server. Reader Config SW - 5VDC
10/100M Ethernet interface
TCP Server, UDP, DHCP
Til 125Khz ID Kort
Forsyning: 5V DC PSU max 300MA
In this overall category you will find a wealth of products and subcategories. Danbit offers for everything from RFID readers Card readers. We stand ready to help you with choices and possible. setup. Looking for something specific, which may be tailored to your job, contact Danbit tel. 56 66 20 20.
In our knowledgebase, you can read more about blah. barcode formats.
Subcategories
There are 166 products.
10/100M Ethernet interface
TCP Server, UDP, DHCP
Til 125Khz ID Kort
Forsyning: 5V DC PSU max 300MA
RS485 Command Controllet Ready / Read
Set to Read. Called to Transfer Take UID Code
10 digit Hex - (26 digits for PC)
2-wire RS485 Half-duplex.
125 kHz EM format.
12vdc 0.2a (MDFollows not)
Dimensions: 113.5 x 45.6 mm (L X B)
Reads 1D and 2D barcodes
quick decoding (4mil)
Support for dark Environmental scanning
interface: USB
depth of field: 20mm-700mm
1D barcode
2D QR code scanner
Stationary for clamping
Supplied with 2 pcs. 3mm threaded socket
1.5 meter USB cable
Push button to scan
Red line and light
Automatic trigger mode
Constant scanning
Honeywell 1902GER-2 Barcode Scanner
KUN stregkodelæser, uden ladestation
1800 mAh Li-ion minimum batteri
Op til 50,000 scanninger pr. Opladning
Trådløs
1D Laser stregkodescanner
IP 67 tæt
USB tilslutning
-20-45 °C
Læseafstand10-500mm
Mifare Desktop 13.56MHz RFID reader
NFC 1-4, ISO 14443A, ISO 15693
Other formats on request
HID, Keyboard emulation
Can be programmed for Virtual COM
HEX or Decimal, ordered upon purchase
13.56MHz
5VDC/100mA
-20 - +60°C
Dimensions: 100 x 65 x 25
RFID Reads 125khz Em-Marin
Em 4100
64 Bit Manchester Coding
10 digit ASCII
RS232 - Only TX and GND
Wiegand Interface
Reading distance: 0 - 20cm Depending Of tag
Supply voltage: 5 - 12VDC
Use liniar power supply (not switch mode)
interface cable from the back
IP67
Goal: 78 x 43 x 15 mm
125kHz EM 4xxx reader with USB
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: EC standard 125kHz
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase
Mifare reads with USB
13.56MHz
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: ISO14443A, ISO18092 FeLiCa tags
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase
To track 1, 2 and 3
Connects via PS2 port
Software not required
data will be inserted where the cursor is (HID)
Sound, reading speed, line breaks and æ, ø and å can set
Weight: 200g
Dimensions: 100 x 34 x 28
cable length: 2 meters
supply voltage: 5VDC (from PC)
Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
Dip-SW to ID format setting - see Table
Environment: IP67 Waterproof, outdoor mounting
operating temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm
Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443a / B / 15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
ID Format setting with DIP switches - see Table
Operating Temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm
Dual band RFID card reader for USB - 10 Decimal
125 kHz: EM-Marin EM41xx, EM4200
13,56MHz: Mifare - ISO14443A
HID - Keyboard Emulation
Reading distance: 5 to 8cm
Powered by USB
USB interface
operating temp. -10 ° to + 70 ° C
dimensions: 98 x 63 x 10mm (L x B x H)
Reading distance: Up to 5 cm
Frequency: 13.56 MHz
Read Mifare Ultralight and Mifare F1 Standard Tag
Mifare 1024/4096 byte, Ultralight 512bit, ISO 14443A
3 in 1 interface : Wiegand, MSR ABA TK2 and RS232
LED and Buzzer
Quick Data Transfer
Weatherproof, ABS
Cable Length: 90 cm
Cable is not terminated with DB9
Easy to install
Supply: 5 - 18VDC (Liniary PSU)
Dim: 83 x 47 x 16 mm
125khz RFID reader for outdoor mounting on wall
sealed with hardened epoxy - cable mid rear
EM4000 125khz RFID Reader for wall mounting
reading distance 0 - 5cm, depending on roof size
40 bit code, 10 digits ASCII (Decimal)
RS232, only TX. GND
9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
Wiegand 26bit format
LED Indicator and Buzzer Control Manager
Supply voltage: 12VDC / 200ma
Cable length 1 meter (8 Core)
Goal: 114 x 46 x 13 mm
Reads ISO tracks 1, 2 and 3
USB interface
Emulates a USB keyboard (HID)
Powered by the USB port
Reads e.g. health insurance card/health card - with æ, ø, å
Optional reading of tracks is possible with inserted end character
Omitting text in tracks is not possible.
Dimensions: L 137 x W 49 x H 50 mm
Magnetic card reader - HID. Keyboard emulation
Magnetic card reader for PS2
Can be connected via USB with adapter
USB adapter may require a restart of the PC!
PS/2 to USB adapter included
A reader head / tone head
Black
Works with OS up to and including Win 10
Can read Æ, Ø, Å. oh, oh, oh
Suitable for clinics for reading health cards
Dimensions: L 137 x H 50 XB 49 mm