RFID / Barcode / Magnet stribe / TAGs / POS

Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Can't change
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Numbered - printet on the card
target: 85.7 x 54 x 0.8 mm

Mifare Classic1K TAG
designed as key ring
Bag with 20 pieces.
reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 Blocks / 16 byte
UID code is factory programmed - cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
Dim: 40 x 32 x 4 mm

Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Dim: 85.7 x 54 x 0.8 mm

125khz RFID reader for outdoor mounting on wall
sealed with hardened epoxy - cable mid rear
EM4000 125khz RFID Reader for wall mounting
reading distance 0 - 5cm, depending on roof size
40 bit code, 10 digits ASCII (Decimal)
RS232, only TX. GND
9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
Wiegand 26bit format
LED Indicator and Buzzer Control Manager
Supply voltage: 12VDC / 200ma
Cable length 1 meter (8 Core)
Goal: 114 x 46 x 13 mm

RS485 Command Controllet Ready / Read
Set to Read. Called to Transfer Take UID Code
10 digit Hex - (26 digits for PC)
2-wire RS485 Half-duplex.
125 kHz EM format.
12vdc 0.2a (MDFollows not)
Dimensions: 113.5 x 45.6 mm (L X B)

Keyboard emulation: 8 decimal places (HID)
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - +75°C 
Humidity during operation: waterproof
Reading range: 5 ~ 15 cm
Cable length: 164 cm
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
wall mounting, water resistant

TAG, round piece, self-adhesive
1.7 x 25 mm
TAG is waterproof

TAG, cylinder, black
4.5 x 30 mm
TAG is waterproof

Take, credit card size 0.8mm.
Tags are waterproof

125kHz EM TAG with magnetic stripe
credit card format
0.8 mm, incl. Magnetic stripe
TAG is waterproof

Tag, key ring
target: 35 x 2 x 4 mm
with engraved UID code
tag is waterproof

125kHz RFID TAG
credit card size 0.8 mm
sequential ID
TAG is waterproof

125kHz RFID TAG
Designed as screw
plastic
9.5 mm Thread
12 mm head
19 mm long.
TAG is waterproof

125 kHz RFID TAG
Dim: Ø25 x 3 mm
TAG is waterproof

125kHz TAG
rectangular, transparent plastic
Dim: 20 x 25 x 0.7 mm
TAG is waterproof

Long Range 2.45GHz RFID reads and writes for 140 m Range
Programmable parameter
1 x RJ45 (10/100 Mbit)
1 x RS232 (RX, TX)
1 x RS485 2-wire Protocol: ICMP, ARP, IP, TCP (Server / Client), UDP, DHCP, HTTP
Supply voltage: 7 - 15 VDC / 4 Watt
Dimensions: 107W x 138h x 30D (mm)
Weight: 222g
easy installation

Active RFID Tag as bracelet with 2 x temperature sensor
with light sensor
2.45 GHz Read and write
Dimensions: 44W x 30h x 11d (mm)
Weight: 23.4g
Wireless programming Digital RSSI / LQI data
low battery warning
built-in button
FCC, CE certified

Active 2.45GHz RFID TAG card
2.45GHz read and write
Transmission distance 140m
programmable parameter
Supplied without 2 x 3V CR2032 battery
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
wireless TAG programming

Active RFID Tag as bracelet with light sensor, anti-tamper
2.45 GHz read and write
Dimensions: 44W x 30H x 11D (mm)
weight: 23.4g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified

Dual band RFID TAG card
2.45GHz and 13.56MHz Mifare read/write
Programmable parameter
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
Combine active and passive RFID
Long operating time on battery
Wireless TAG programming
Supplied without battery (2 x 2032)

Active RFID Tag with hole for pendant + vibration sensor
2.45 GHz read and write
Transmission distance 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified

Active 2.45GHz RFID TAG
2.45GHz read/write
Range up to 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
Wireless programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
Built-in SOS button

Active RFID Take with key ring pendant
2.45GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless TAG programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified

Outdoor UHF RFID reads and writes
for Passive UHF 865MHz TAGs
TAG protocol: EPC Class 1 Gen 2
ISO 18000-6C
Reading/writing is controlled via software commands
Software App Platform: API (C ++, C #) Development Kit
Up to 10 m Reading distance, depending on UHF Tag
built-in 8DBI antenna, circular polarity
IP67 Plastic cabinet
Operating temp: -40 - + 75 ℃
150 ~ 240VAC / 50Hz adapter with 12VDC / 3A out
Dim: 259 × 259 x 100mm (L × B × H)

Active RFID Tag with key ring and vibration sensor
2.45 GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless tag programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified