Batteri til BARCCD-RF-USB
Genopladeligt Li-ion batteri, 3,7V, 1620mAh
In this overall category you will find a wealth of products and subcategories. Danbit offers for everything from RFID readers Card readers. We stand ready to help you with choices and possible. setup. Looking for something specific, which may be tailored to your job, contact Danbit tel. 56 66 20 20.
In our knowledgebase, you can read more about blah. barcode formats.
Subcategories
There are 164 products.
Genopladeligt Li-ion batteri, 3,7V, 1620mAh
Network RFID reader
10 / 100Mbit Ethernet interface
Supports MDI / MDIX
1 x RJ45 and 1 x DC connector
TCP Server, UDP, DHCP
for 13.56MHz Mifare card
Supply: 5V DC PSU Max 300mA
Honeywell 1902GER-2 Barcode Scanner
KUN stregkodelæser, uden ladestation
1800 mAh Li-ion minimum batteri
Op til 50,000 scanninger pr. Opladning
Trådløs
Reads 1D and 2D barcodes
quick decoding (4mil)
Support for dark Environmental scanning
interface: USB
depth of field: 20mm-700mm
Mini seriesport server for connecting POS units over networks
It may be scanner, printer and the like
2 x RS232
2 x USB 2.0
1 x USB 3.0
1 x RJ45 10 / 100Mbit to Ethernet
Supported by App for iOS and Android
Programmable Software
Supply 5VDC (DC Jack)
RFID UHF 865MHz PVC Bracelet
One-off closure
Adjustable size
Waterproof
Operating temperature: -30 ~ 75 ° C
White
Width 2.7 mm
Length Shared 100 mm
total length 278 mm
Fanless
4 x COM (DB9, with power output, +5VDC/+12VDC, selectable by Jumper)
2 x COM (Internal, reserved for VFD Customer Display and MSR)
1 x DB25 Parallel Port
5 x USB 2.0 (External, 4 x bottom/ 1 x side)
RJ-45 Gigabit LAN
VGA
1 x 12VDC (Output) Jack for Customer Display or 2nd Display
1 x RJ-11, +12/+24 VDC (Cash drawer)
+12VDC 60W, 4-pin Connector with Lock
355 x 302 x 204 mm
USB HF RFID reader with fingerprint
Available with and without funger pressure scanner
Desktop
USB 2.0 Compatible
Incl. programming software download Up to 2,000 fingerprint
range 0-5 cm Kirke roof type: ISO15693 / ISO14443A (Mifare) / ISO14443B / DESFire / NTAG203
supply: USB 5V / 200mA
Operating temp. -20 to + 70 ° C
Play
Plug Dimensions: 105 x 72 x 16 mm
Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required
NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!
Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)
USB 2 x PC splitter
2 x DB9 special cable output (DB9 to USB)
1 x RS232
USB Power (5VDC)
Speeds from 1200bps to 115200bps with select
OS support: Windows OS, MAC OS X, Linux
Incl. 2 pcs. DB9 male to USB-A male cable 1,2m
Operating temp. 0 - + 50 ° C
1D, 2D barcode reader
Wireless 2.4GHz (RF dongle) or USB-A for USB-B cable
Reading distance: 10-500mm
Operating time: Approx. 16 hours
Recharge time: Approx. 6.5 hours via USB-B
Memory: 512K (over 5000 barcodes)
Dimensions: 150mm (L) x 70mm (W) x 95mm (H)
1D, 2D barcode reader
Wireless 2.4GHz via base station (supplied) or USB-A to USB-B cable (included)
Reading distance: 10mm-700mm
Operating time: Approx. 12 hours
Recharge time: Approx. 6.5 hours via USB or base station
Memory: 512K (over 5000 scans)
Dimensions: Scanner: 175 (L) x 72 (B) x 100 (H), Base: 200 (L) x 90 (B) x 51 (H) mm
Weight: 210g (Scanner), 230g (Base)
MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232
MDB Male and Female
DEX Male and Female
Module with 1 relay output
5VDC from optically isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A - non inductive load!
RFID with QR code reader
125kHz EM400x
13,56MHz Mifare Ultralight
Built-in buzzer for audio notification
can read multiple formats
With CPU watchdog
Power supply: 12V DC
Output: RS232, RS485, Wiegand 26/34 bits
Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC
866 - 868MHz CE, equipped with 12dBI linear antenna
EPC Class 1 gene 2 (ISO18000-6C)
from 0 ~ 20 meters reading distance (depending on the surroundings)
from 0 ~ 7 meters of writing distance ( Depending on the surroundings)
Linux OS, Indy R2000 RFID chip, fast and precise reading rate
Ethernet connection
445 × 445 × 100 mm (l × W × H)
Operating temperature: -20 ~ + 60 ° C
IP65
Option: RS232 / 485, USB, GPIO, Wiegand 26/34, 4G LTE and WiFi
Option: Poe
Frequency: 860-960MHz
PVC / PET
ISO18000-6C (EPC GEN2)
Dimensions: 86x54x0.8mm
Operating temperature: -25C - 85 degrees
RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)
Waterproof RFID reader
only with Wiegand Interface
Connect to access controls with Wiegand
TAG Type: EM / Mifare
Reading distance: 5.8 cm
IP68
Frequency: 125kHz / 13,56MHz
LED and Buzzer
Cable out from the back
Detachable Backpiece
Supply Voltage: 12VDC
Dimensions: 86 x 86 x 22mm
BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!
Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)
Combatible with EPC Class 1 Gen 2
TAG Type: ISO-18000-6C
Support up to 860MHz (Europe) UHF
Reading distance: Up to 20 cm
Writing distance: Up to 15cm < Br> Built-in antenna
Supply voltage: USB from PC
API Software Developers Included
Built-in LED Buzzer
Operating temperature: -20 to + 65 ° C
Dimensions: 105 x 72 x 16 mm
Supporter NXP Desfire EV1 / EV2 Read / Write
Supporter Desfire Tags
Supporter Auto Read Desfire UID / Block
Reading distance: Up to 5 cm
built-in two-color LED and Buzzer
API Development Shooting Included
Support Decimal, HexideCimal and ASCII ID Formats
Supply Voltage: USB from PC
Unique Serial Number Identification (UID)
Operating temperature: -20 to + 65 ° C
Dimensions: 62.3 x 87.7 x 18.4 mm