

5VDC 4 Amp (20Watt) power adapter from 100 - 240VAC, plug: 5.5 / 2.5mm
Switch mode type
100-240 VAC to 5VDC / 4 A
DC plug. 5.5 / 2.5mm
LoRaWan transceiver with 2 x digital inputs
LoRaWan transceiver with 2 x analog inputs 4-20mA / 0-10V
LoRaWan transceiver with relay output (SPDT)
Supports LoRa Class C protocol
Serial port: RS232 or RS485 (Transparent data)
Collect data sent to Lora-Gateway Controller
Frequency: 868MHz - Range Up to 10 km
Configuration Port: Micro USB
Operating temperature: -40 - +70°C
Supply voltage: 5 - 24VDC
Dim: 120 x 120 x 56 mm
Er en udendørs LoRa-nodecontroller, der bruges til dataindsamling fra flere sensorer. Den indeholder forskellige I/O-grænseflader, herunder analoge og digitale input, relæudgange og serielle porte for at forenkle implementeringen og udskiftningen af LoRaWAN-netværk. Desuden kan den udløse flere tilstande og handlinger uden et netværk. Med sit industrielle design og IP30 metalhus er den meget brugt i indendørs applikationer som smarte industrier, bygningsautomation osv.
LoRaWAN-controlleren med indbyggede flere industrielle interfaces forbinder til alle typer sensorer, målere og andre apparater. Det bygger også bro mellem Modbus-data mellem serielt og Ethernet-netværk via LoRaWAN. Den understøtter LoRaWAN klasse C-protokol for at være i fuld kompatibilitet med standard LoRaWAN-gateways inklusive LORA-GATEWAY5 serien. Den er ideel til storskala IoT-applikationsimplementeringer, såsom projekter til bygningsautomatisering, smart måling, HVAC-system osv. Med flere grænseflader kan LoRaWAN Controller perfekt hjælpe med at eftermontere ældre aktiver til IoT-aktivering.
Switch mode type
100-240 VAC to 5VDC / 4 A
DC plug. 5.5 / 2.5mm
12 Volt 15 W power supply
DIN rail mounting
Screw terminals
Fine tuning output voltage
Operating temp: -30 - + 70 ° C
LoRaWan with stable connection to IoT units
4 x 10/100 / 1000Base-T RJ45 LAN ports
1 x 10/100 / 1000Base-T RJ45 WAN port
1 x LoRa antenna - 2DBI with SMA male
1 x Serial console Port (RS485)
2 x DI / DO and 1 serial port (RS485) for Modbus applications
For EU 868MHz (SUB 1G) Frequency
8 Programmable parallel demodulation paths
static IP / PPPoE / DHCP client for WAN
DHCP server / NTP client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm
LoRaWan with stable connection to IoT units
Dual Band WiFi - 2 antennas with RSMA male
3 x 10/100/1000Base-T RJ45 LAN ports
1 x 10/100/1000Base-T RJ45 Wan-Port
1 x LoRa Antenne - 2DBI with SMA male
2 x DI / DO and 1 serial port (RS485) for Modbus applications
to EU 868MHz (SUB 1G) Frequency
8 Programmable Parallel Demodulation Roads
Static IP / PPPoE / DHCP Client for WAN
DHCP Server / NTP Client for LAN
Protocols: TCP / IP, UDP, ARP, IPv4, IPv6
port forwarding; Qos; DMZ; IGMP; UPnP; SNMPv1, V2C, V3
Dim: 135 x 135 x 50 mm
SFP Dust cap - blanking of unused port
Suitable for unused SFP slot
Protection against impurities
Flexible
Sold individually
REMAINING STOCK
DSL/Cable VPN Router
IEEE 802.3,IEEE802.3u
4 x 10/100M Ethernet RJ-45 ports
1 x 10/100M WAN RJ-45 port
1 x RS-232 dial up backup port
DDNS, UPnP
Up to 32 IPSec VPN tunnels
Supply: 12V DC, 1.2A
Layer 3 Managed Switch
8x Gigabit Ports
4x 10Gbps SFP Ports
Supports OSPF, RIP & Static Routing
VLAN, ACL, Syslog and more
Configuration: Console, Telnet/SSH or Web browser
Operating Temperature 0 ~ 50 C
IPv4 & IPv6 Routing
Power using AC cable
Dimensions 280 x 180 x 44mm
Weight 1622g
Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS