Monitor, manage and manage industrial devices
2 x SFP slot for fiber transceiver (SM or MM)
Industrial EMC protection, temperature operation wide, -40 ° C ~ 85 ° C
fast- Ethernet 2 x 100/1000 SFP slots with RSTP Redundans
4 software Select RS232 / RS485 / RS422 serial ports, up to 921Kbps
TCP Server / Client, UDP, Virtual com and tunneling modes are supported
Embedded security with PPTP, IPSec or OpenVPN Client / Server
Redundant 12 ~ 48 VDC Power entries
Configuration via Web Browser / Serial Console / Telnet / Windows Utility
Robust metal cabinet with wall or DIN rail mounting
Make serial devices Ready for the network
Industrial Serial Device Server Eth4SER-A is a cost-effective gateway to Ethernet (TCP / IP) and serial signal communication; Allows almost any serial device to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, Eth4ser-A offers full duplex and bi-directional data seamlessly between the four serial ports and Ethernet network, through 2 x 100/1000 SFP fiber slots.
Advanced embedded security service Eth4ser-A embeds OpenVPN and IPSec VPN, allowing you to tunnel your data safely the design internet and prevent unauthorized control over your serial units of malicious people. The integrated Rapid Spanning Tree Protocol (RSTP) makes it possible to add a backup Ethernet link in case the primary failure.
Flexible configuration options Activate this device to be setup over Ethernet of telnet, web browser , Serial Console, or our Windows Utility. Packed in a robust metal housing for wall or DIN rail mounting with redundant 12-48 VDC wide range power input and a relay output, Eth4ser-A is ideal for almost any industrial and manufacturing automation process. Virtual Com software provides a virtual environment for applications by accessing Eth4SER-A through TCP. in industrial and manufacture automation fields, Eth4ser-A is used as a field Unit to connect Ethernet via the TCP / IP protocol directly. It is also specifically designed together with PLCs, HMI, Barcode scanners, data terminals, and much fun. "Real design protects it from very harsh EMC and environmental conditions, making it a cost-effective choice for advanced applications.
Eth4ser-a embeds high protection EMC, temperature operation wide, programming and flexibility Installation in one unit. POE versions can power via power-over Ethernet (POE 802.3AF), without additional cables and power supply. SDK versions allow you to make use of the powerful hardware and develop your own applications on top of 's reliable SDK.
MOXA
External COM port via Ethernet and Internet
RS422 / 485 Serial port via screw terminal
Power supplied from POE or 12 - 48VDC
Your mounting
2 COM ports over Ethernet, Internet
Each COM port can be RS232 or RS422 or RS485
RS232 Pin 1 - 8: DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS
RS422 / RS485 4-W: Pin 1 - 5: TXD +, TXD, RXD +, RXD, GND
RS485 2-W: Pin 3 - 5: Data, Data +, GND
Baud Rate: 50 bps - 921Kbps
Data Bits: 5, 6, 7, 8
Parity: 1, 1.5, 2
Stop Bit: Odd, Even, None, Space, Mark
2 x RJ45 10 / 100mbit
Alarm: Relay output
Supply voltage: 12 - 48VDC 6.5WATT
Web Management
IP Version: IPv4 / IPv6. TCP Server, TCP Client, UDP Client
Virtual Com
Pair Connection
Supporter: XP to Win10, Server 2003, 2008, 2012
Size: 135 x 88 x 32 mm
DIN bracket
1-port RS422 / 485 serial device server, MOXA NPort 5130A
Only 1 W power consumption
3-step web-based configuration
Surge protection for serial, Ethernet and power lines
COM port grouping and UDP multicast applications
Screw connections for secure mounting
Real COM / TTY drivers for Windows and Linux
standard TCP/IP interface and versatile TCP and UDP operating modes
connect up to 8 TCP hosts
12Vdc power supply included
Supports several different RS422 formats, such as 7N1, 8N1, etc.
