1 port serial server RS232 / RS422 / RS485. Serial Device Server RJ45, DB9, 9 - 30VDC

External COM port over Ethernet and Internet
RS232/422/485
Baud rate: 1200 - 230.4kbps (2-wire)
Max. baud rate at 4-wire RS485 up to 921.6kbps
Atop SE5201-DB Serial Device Server
10/100Mbit Ethernet.
Serial port via DB9 male connector
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Power is supplied from 9 - 30VDC or 5VDC (power jack)
Power supply not included
DIN kit (option)
Dimensions: 65 x 78 x 28mm (without wall bracket)
Dimensions: 88.5 x 84 x 27.8mm (with wall bracket and DB9 port)

ETH1SER-MINI+
2,440.00 SEK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

With the ETH1SER-MINI+, a virtual COM driver is supplied that installs a virtual serial port (RS232/422/485) on the PC as if it were a physical port. The ETH1SER-MINI+ can be set up with an embedded Web server, Windows setup program or the serial port. ETH1SER-MINI+ has a single serial port for e.g. local network and/or internet. A simple Windows program is included which automatically finds all ETH1SER-MINI+ on the network so they can be set to an optional IP address.

Power is supplied from 9 - 30VDC - or 5VDC via power jack connector. Power supply not included - additional purchase may be required. DC5V/1.5ARQ

Dimensioner
65 x 78 x 28mm (without wall-mount part), 88.5 x 84 x 27.8mm (with wall-mount part and DB9 connector)
Driftstemperatur
-40°C ~ 70°C
Montering
Wall-Mount or DIN-Rail (optional kit)
Netværk
10/100 Mbit Ethernet
OS SUPPORT
Windows / Linux
Porte
RS232 / 422 / 485
Protokol
TCP, IPv4, UDP, DHCP Client, HTTP, HTTPS, Telnet, ARP, SNMPv1,v2c,v3
Skærm
3 lysdioder viser Tx/Rx, netværks- og systemstatus
Stik
3-Pin 5.08mm Lockable Terminal Block, DC Jack (for redundancy), RJ45 10/100 Ethernet, DB9 serial
Strømforbrug
Less than 1.5W
Weight
185g

4 other products in the same category:

1 channel TCP/RTU/ASCII...

1 channel TCP/RTU/ASCII Modbus Gateway. RS232/RS422/RS485. TCP Server/Client, Virtual Com. 9 - 30VDC

1 channel software-selectable RS-232/485/422 port
Baud rate: 1200 - 230,400 / RS485 921,600
Screw terminals for Data
Screw terminals for DC supply
1 x 10/100 Mbps RJ45 Fast Ethernet port
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Modbus TCP/RTU/ASCII
Configuration via the web server side, the Telnet console and the Windows Utility
Upgradable firmware via Ethernet from a remote PC
Robust metal cladding; industrial EMC protection
Redundant dual DC inputs for non-stop operation
Optional DIN rail mounting
Supply: 9 - 30VDC or 5VDC / 9W
Dimensions: 78 x 65 x 28 mm
Temp: -40 - +70°C

Price 2,185.60 SEK
Product code: ETH1MOD-A
On the way in  
Quick view