PoE adapter
DC injector / splitter cable
Supports 5/12/24 / 48V
Range: Up to 40m
Dimensions DC plug: 5.5 / 2.1mm
Length cable : 15cm
Set of 2 pcs. cables - injector and splitter
PoE adapter cable. Passive DC injector / splitter cable.
DC splitter cable such as. can be used for wireless access points, CCTV IP video surveillance.
Set of two. 15 cm long cables with RJ45 male and its connectors at the ends, mounted on a cable with respectively. A 5.5mm DC male connector and female connector.
Legs 4 and 5 on the RJ45 female connectors are connected to the center conductor and pins 7 and 8 are connected to the outer conductor of the DC connectors. a DC supply voltage but does not comply with the 802.3af / at the standards of PoE.
Strømforsyning af Access Point eller webkamera via Ethernetkablet.
Gigabit PoE splitter for indoor installation
PoE++ (60W) splitter with optional DC output for non-PoE equipment
DC output: 12VDC/5A or 19VDC/3.2A or 24VDC/2.5A
1 x RJ45 port for PoE++ in from switch or PoE Injector
1 x RJ45 port (data) for non-PoE equipment
1 x DC Jack connector (5.5/2.5mm) for equipment
PoE standard: IEEE 802.3at/bt (PoE++)
IEEE 802.3at (PoE+ Mid-span)
IEEE 802-3bt (PoE++ PoH HDBaseT) - type 4
Operating temperature: 0 - +50°C
Wall bracket
Additional DIN brackets
Dimensions: 94 x 70 x 39 mm
Weight: 265g
Power over Ethernet - No Additional Power Source Required
Extend a POE signal max. 100m over a single CAT cable (cat 5 or higher)
Splitter for PoE via Ethernet cable
LAN with PoE in, gives LAN without PoE out
12 VDC 2A or 24 VDC 1A next to other equipment
