Remote control and measurement, ICMP echo req/reply Watchdog, 2xDigital in, 2xAnalog in, 2xRelay out, 1-wire sensor input

Module with password protected Web based configuration and control

Instant ICMP watchdog - no echo will restart the module

1-Wire interface for 2 sensors

2 x relay outputs with NO/NC contacts

2 x analog input 0 to 60VDC - 10bit resolution, 100mV display

2 x digital input with "dry contact" or "logic level" mode

Stable IP watchdog monitoring - for equipment restart

SNMP v.1 support

SNMP trap conditional messages

VLAN and MAC address filtering

Remote FTP firmware update.

Supply voltage: 10 - 14VDC - purchase PSU

TCW122B-WD
1,634.92 NOK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

TCW122B-WD is a surveillance module for monitoring IP surveillance applications, specially designed for a fail-safe surveillance system.

The module controls the functionality of devices or networks by sending or receiving ICMP echo request or ICMP echo reply, respectively.

The current relay is activated if there is no ICMP echo (ping) within a certain time. This may reboot the monitored device or the network switch/router.

TCW122B-WD has two digital and two analog inputs. These are two relays with normally open and normally closed contacts.

For all monitored parameters - temperature, humidity, analog voltage and digital input status, SNMP traps can be sent under certain conditions.

The relays can be activated remotely (WEB and/or SNMP) or automatically from the presence/absence of ping.

4 other products in the same category:

Data collector via Internet...

Data collector via Internet / LAN, 4 x digital input, 4 x analog input, 4 x relay output, 1-wire for temp / moisture, Modbus

Web based data collector module with built-in Web server
4 x digital input dry - External contact without voltage
4 x analog inputs with 0 to 60vdc - 10mv resolution
multiplier and offset for analog inputs and sensors
1-wire for a maximum of 8 sensors (16 parameters)
4 x Powerful relay outputs with No / NC Contacts
Modbus TCP / IP Support
SNMP V2 Support with Trap Alarm for 5 Recipients
4 PCS. Forms for real-time control of relay
Specific logical functions for relays
Secured email
XML / JSON and HTTP API commands for Client server
Dynamic DNS support for Dyndns, No-IP and DNS- O-Matic
NTP TimeSync
Supply voltage: 10 - 32VDC - Buy PSU
Dim: 145 x 90 x 40 mm

Price 3,307.93 NOK
Product code: TCW241
On the way in  
Quick view
Temperature sensor with...

Temperature sensor with RS485, -20 to +60°C, Modbus RTU interface, 14 bit resolution, cascade connection

Temperature sensor TST300V2 with RS485 interface
±0.13°C accuracy from +20°C to +60°C
14 bit resolution
2 x RJ45 for daisy chain connection to the next sensor
IP20 sealed housing
Low power consumption
Modbus address table: see TST300 manual
Log in to danbit.dk and press DOWNLOADS

MODBUS RTU interface

Price 1,187.30 NOK
Product code: TST300
Physically in stock  
Quick view
4G LTE alarm and remote...

4G LTE alarm and remote control, M2M, Datalogger, I/O with Digital and Analogue, 1-wire, Relay, MODBUS, 12 - 24VDC

Multi-band 4G LTE Cat.1 controller, logger and alarm
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C

Price 4,365.08 NOK
Product code: TCG140-4E
Physically in stock  
Quick view