Fittings for DOOR-MAGNET + E + S accessories
Special door fittings for DOOR-MAGNET + E + S
L-Bracket: 50x33x251mm (WxDxL)
Z-Bracket: 50x100x190 mm (BxDxL)
Electric access control means that the door or gate must be equipped with an electric lock.
There are extremely numerous types and sizes, designed for all type of doors. Type Electric strike is the part of the lock mounted in the door frame. It has an electronically controlled mechanical flap that allows the latch on the door lock housing can pass freely during the time the electronics controlling this.
...Electric access control means that the door or gate must be equipped with an electric lock.
There are extremely numerous types and sizes, designed for all type of doors. Type Electric strike is the part of the lock mounted in the door frame. It has an electronically controlled mechanical flap that allows the latch on the door lock housing can pass freely during the time the electronics controlling this.
Where it is not possible to use electric strike may the door and the frame is provided with an electric holding magnet, in turn controlled by the access electronics. When the door is locked must be running a current in the holding magnet coil. When the coil is strømlås, release hold the magnet holding force to the door. This type holding magnets are available in various sizes and holding power. Typically, the holding force 300 kg.
The locking bolt lock type is the most secure, and that can be mounted more on the same door. The lock bolt is provided with a magnetic sensor which only allows the pawl to lock with the door in the exact position. Motor Lock is also an option, but not so widespread. Dørautomatikker combined with electric strike is a good solution, especially taking into account the person in a wheelchair. In addition to our solid solutions are also smart lock. Among other things. we dørrelæer with facial recognition, RFID and fingerprint as after five failed attempts at penetration will lock in 3 minutes and send notification to your smartphone. Super efficient keyless door lock.
Should you not find the lock you need, please contact us for advice and guidance.
Subcategories
There are 93 products.
Special door fittings for DOOR-MAGNET + E + S
L-Bracket: 50x33x251mm (WxDxL)
Z-Bracket: 50x100x190 mm (BxDxL)
Output contact for access
Stainless brushed steel button steel
Acquisition metal housing for wall
Contact NO / NC / COM
Dimensions: 91 x 28 x 20mm
Contact: max 2A
Panelmonterbar EXIT contact for access
Contact: COM / NO / NC
Brushed aluminum with red button
Not vandal proof
Dimensions: 112 x 70 mm
Contact up to 2 Amp
Output contact for access control with cunduct / breaking function
robust plastic house with steel Back plate
Contact: NO / NC / COM
Momentary Contact press
Contact: Max 3A
Size: 86 x 86 x 42 mm
Passive Exit Button
Electric strike for door frame, with lock monitor, 38 mm
with lock open without excitement
with lock closed without excitement
Force: 450kg
Voltage: 12VDC 300mA polarity independent
Lock Monitor: COM, NC NO output
Buy: DC12V/1A-R-Q
Dim: 202 x 36.5 x 27 mm
Electronic Mini Lock
12VDC / 1A
Goal: 80 x 65 x 14 mm
Weight: 260g
Miniature Electronic holding magnet for cabinets and closets
Supply Voltage 12 VDC, 140mA minimum
Holding force up to 36 KG
Operating temperature: -10 ~ 55C
IP65 close Stainless steel with epoxy filler
magnet dimensions: 70 x 38 x 26 mm
Counter-plate dimensions: 80 x 32 x 18.5 mm
Weight of 350 g
Miniature electronic holding magnet for cabinets
Supply voltage 12 VDC, minimum 140mA
Holding force: Up to 36 kg
with Bond sensor - Relay output COM, NC
Bond sensor is a closed indicator - Can inform the controller
Operating temperature: -10 ~ 55ºC
IP65 Stainless steel with epoxy filling
Magnet dimensions: 70 x 38 x 26 mm
Holding plate dimensions: 80 x 32 x 18.5 mm
Weight 350 g
Electric magnet locksplation for gates and doors
Team power is 110kg
supply voltage 12 or 24vdc, minimum 5watt
consists of electronic magnet and heavy metal plate for door / frame
target: 160 x 28 x 17mm
Plate: 130 x 28 x 8mm
Buying access system - see accessories
Power socket for door frame, w / monitor funk., 45 mm
Holding force: 900 kg.
Voltage: 12 VDC, 250 mA. Not included. For example, use DC12V / 1A-R-Q
Dimensions: 202 x 45 x 32 mm (H x W x D)
max. (H x B)
Electric endplate 70mm
Error-proof - not suitable for back pressure
Quick and easy installation
Static holding force & nbsp; 454 kg
12VDC
Dimensions: 70 x 43 x 25mm
Compact motorized lock with separate pawl
Locked without tension
Releases the locking pawl in case of short-term tension
The pal part has a push-out (5-8mm)
Adjustable delay on relocking 2 to 5 seconds
2 lock inputs
Can be mounted in 2 different ways
Control voltage - 12 - 28VDC / VAC, max. 165mA
Dimensions: 60 x 60 x 22mm
Compact motor-controlled lock with separate pawl
Control voltage - 12VDC
With door-closed status
Holding force: 50 kg
Operating temp. -10 ° C - + 55 ° C
Dimensions: 41 x 35 x 19mm
Pal: ø9mm, 18mm
Weight: 0.11kg
Can be used on wood, aluminum and metal
Hold voltage - 12VDC
Holding Force: 150kg
Dimensions: 64.1 x 40 x 25 mm | Weight: 0.18kg
Cabinet lock - 150kg. Locked without voltage
trigger voltage: 12VDC / 180MA
Holding force: 150kg
Size: 50 x 31 x 27 mm
Weight: 0.18kg
Cabinet lock - 150kg. Locked with voltage
Voltage: 12VDC / 180MA
Holding force: 150kg
Size: 50 x 31 x 27 mm
Weight: 0.18kg
door magnet with clamping force up to 272kg
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, 0.5A / 0,25A
Automatic switching between 12 and 24VDC
No holding power at any voltage
Operating temperature: -10 to + 55°C
Magnetic: 250 x 44 x 26 mm
Door-plate: 185 x 38 x 12 mm
Mounting plate for the frame: 250 x 26 x 5.5 mm
Anti magnetic function
Electronic door magnet 12 / 24V DC
363 KG holding force
Operating temperature: -10-55 degrees
Fungtighed: 0-96% non-condensing Blue Magnetic: (L) 265 (W) 29, (D) 49mm
A valve plate (L) 185 (W) 45, (D) 14mm
mounting plate (L) 265 (W) 29, (D) 6.5mm
Weight: 2.79 KG
Electronic door magnet with team power up to 272kg
Gen-Close timer Adjustable from 1 - 80 sec.
Door Closed Sensor - Relay output
Aluminum with epoxy at coil
12VDC or 24VDC, 6Watt
Switching between 12 and 24VDC
No holding power at Voltageless
Magnet: 250 x 42 x 26 mm
Door plate: 185 x 38 x 12 mm
Mounting plate: 250 x 25 x 5 mm
Anti magnetic function
Operating temperature: -10 - + 55ºC
Elektronisk dørmagnet til skydedør etc.
Holdekraft op til 272 kg
Aluminium hus og vandalsikker
Forsyningsspænding for hold: 12VDC eller 24VDC, 6 Watt
Omskiftning mellem 12 og 24VDC
Ingen holdekraft ved spændingsløs
Driftstemperatur: -10 - 55°C
Fugtighed: 0-95% non-condensing
Dobbelt-magnet: 187 x 38 x 27 mm
Dør-plader: 185 x 38 x 12 mm
Vægt: ca. 2kg
Tilkøb Adgangssystem - se Tilbehør