8 port Gigabit N-Way Switch 10/100 / 1000Mbit ideal where the need is greater - Remnants
Gigabit switch in robust metal housing
10/100 / 1000Mbit
230VAC supply voltage
DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication...
DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication devices that allow data communication between different network devices locally and the World Wide.
The network switch handles the flow of data across a network, also called back bone, by only sending a received network packet to the one or more devices to which the package is intended.
Each network device connected to a switch can be identified using the network address, the IP address, so that the switch can control the flow of traffic that maximizes network security and efficiency.
There are 2 basic versions of Ethernet switches, the simple ones -managed switches that route data to the ports that the telegrams want. The more advanced Ethernet switches are "managed" switches, where there are a lot of setup options to control and optimize the data flow and, not least, increase data security, also in the context of cyber crime protection. A switch can be built up with up to 7 "layers" which each have their task. For example, layer 3 is for controlling IP multicast (IGMP snooping - for example, video distribution), some router functions, IP routing at VLAN configuration.
The network switch is found everywhere and plays an integrated role in most modern Ethernet local area networks (LANs). Medium and large networks contain a number of managed switches. Small and small systems typically use an un-managed switch or the LAN ports that an Intenet Router is equipped with.
An Ethernet switch can be for both PDS cables (RJ45 cables) and optical fiber cables and many Equipped with ports for both cables.
DANBIT offers a host of different network switches, ranging from PoE Switch to industrial 24-port managed switch with built-in SFP ports. See the great selection here.
There are 86 products.
Gigabit switch in robust metal housing
10/100 / 1000Mbit
230VAC supply voltage
8-ports Gigabit switch med intern strømforsyning
Det Norske Veritas Certified marine network switch DNV GL
Managed 8 port network switch approved for ships
8 x 10 / 100Mbit Auto-MDI / MDIX
2 x 100 / 1000Mbit SFP Single Mode or Multi Mode
Supply voltage: 12 - 60VDC, 12Watt
Polarity protection, over voltage protection at DC input
Dimensions: 162 x 123 x 50 mm
Weight: 780G
Operating temperature: -40 - +75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure
Det Norske Veritas Certified marine network switch DNV GL
Managed 8 port network switch approved for ships
8 x 10/100 / 1000Mbit Auto-MDI / MDIX to 4 x 1000Mbit SFP single mode or multimode
Supply voltage: 12 - 60VDC, 18Watt
Surge rotection, over voltage protection DC input
Dimensions: 162 x 122 x 50 mm
Weight: 860g
Operating temperature: -40 - +75°C
Humidity: 10 - 90% RH (non-condensing)
DIN fittings, metal enclosure
Unmanaged 10/100Mbps switch
4 x 10/100 / 1000Mbit RJ45 not managed switch with PoE
2 x 10/100 / 1000Mbit RJ45 Uplink ports
PoE is 54VDC
PoE provides 30 Watts per port (4 ports)
Max. 55 Watts total PoE
Autodetekterer PoE devices
56VDC, 60 Watt - PSU included
Unmanaged Industriswitch med 4 x RJ45 10/100Mbit
2 x SFP - 100Mbit
12 - 48VDC, 16Watt
Unmanaged 6 ports industriswitch
6 x RJ45 10/100Mbit
Redundant PSU input.
4x 30W 56VDC IEEE802.3at PoE port
1x 56/24VDC PoE port
1x SFP Port
2x 48-56VDC Indgang
Driftstemperatur -40°C - 75°C
10/100/1000Mbps Data Rates
Total Power Budget 120W
Unmanaged Switch
4 x RJ45 PoE++ port 10/100/1000Mbit
2 x 100/1000X SFP-port
Samlet PoE effektbudget: 250W
4x60W PoE ELLER 2x90W PoE+2x30W
PoE standart: IEEE 802.3bt
IP67, IK10
Driftstemperatur: -40°C ~ 65°C
Option: PoH 100W / Managed
4 x 10/100/1G/2.5GBASE-T RJ45 copper ports
2 x 10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X SFP
1 x RJ45-to-RS232 console interface for basic management and setup
DC 9 to 48V input or AC 24V input
DIN-rail and wall-mountable designs
IP30 aluminum case
Temperature -40 to +75 degrees C
2 x digital input (DI)
2 x digital output (DO)
Integrates sensors into auto alarm system
Transfers alarm to IP network via email and SNMP trap
IPv4 dynamic routing protocol supports RIPv2 and OSPFv2
IPv6 dynamic routing protocol supports OSPFv3
IPv4/IPv6 hardware static routing
Supports G.8032 ERPS (Ethernet Ring Protection Switching)
IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode
Supports IPv4 IGMP snooping v1, v2 and v3
Supports IPv6 MLD snooping v1 and v2
Switch Management Interfaces
SNMP Management
Managed Gigabit switch 2 x RJ45, 2 x Fiber
4 x RJ45 10/100/1000Mbps
2 x SFP 100/1000Mbps
Support ERPS (Ring protection)
IGMP/MLD Snooping (IPv4, IPv6)
Up to 256 VLAN groups
Support Cisco ether-channel (Static Trunk)
Port mirroring - up to 4 sessions
Supply voltage: 9 - 48VDC, 24VAC
Size: 135 x 88 x 32 mm
Temperature: -40 to +75°C
DIN-mounting
Unmanaged Gigabit industriswitch med 4 x RJ45 10/100/1000
2 x SFP - 100/1000Mbit
12 - 48VDC, 7,2Watt
REMAINDER SALE
4 x 10/100Mbit RJ45 Managed switch with PoE+
2 x 10/100Mbit RJ45 redundant uplink ports
DC 48V Power Input (power supply not included)
Up to 25 Watts per port
Max. 80 Watt total power
Multiple Super Ring technology (MSRTM), 5ms recovery time
Dual Homing (RDHTM)
IGMP snooping multicast
Built-in hardware watchdog timer for system auto-reset
-40~60°C operating temperature
Unmanaged 6 port industrial switch
6 x RJ45 10 / 100Mbit
Redundant PSU input
Unmanaged 5 Ports IndustriSwitch
4 x RJ45 10 / 100mbit
1 x SC Fiber 100Mbit Single Mode
IP30
Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x ST fiber 100Mbit Multi Mode
IP50
Unmanaged 5 ports industriswitch
4 x RJ45 10/100Mbit
1 x SC fiber 100Mbit Single Mode
IP50
Unmanaged 5 Ports Industriswitch
4 x RJ45 10/100Mbit
1 x St Fiber 100Mbit Multi Mode
IP40
PASSIVE PoE means that the switch supply voltage is on the 4 PSE ports
only used for PoE 802.3af / at PD equipment but ONLY with 48-55VDC supply voltage to the switch
5 port 10 / 100Mbit Switch with 4 PoE ports
4 x PoE RJ45 PASSIVE PoE
1 x RJ45 Uplink
48Watt per PASSIVE PoE port
Supply voltage: 12V DC - 55V
5 port 10/100/1000 Switch with 4 poE ports
4 x PoE RJ45
1 x Uplink RJ45
& lt; 8W per PoE & Ethernet standard: IEEE802.3, IEEE 802.3u , IEEE802.3ab, IEEE802.3af / at
Power Supply: DC48V - 53V
5 ports Unmanaged switch - MOXA EDS-205
10/100Mbit RJ45
Broadcast storm protection
DIN-skinne
-10 to 60°C driftstemperatur
Unmanaged 5 port 10/100/1000Mbit
Redundant power input
9 - 48VDC
24 VAC
Embedded high power injector max. 60W for each PoE port
IEEE 802.3at/af PoE compliant
Power Protection: OVP, OCP, SCP
Compact design with wall mounted capability
UL/CB -certified external power adaptor of 120w
Per port PoE(Mode A, Mode B) On-Off Control by DIP Switch
5 x 10/100 / 1000Mbit RJ-45 with 4 ports with PoE +
PoE + is 30.8 Watt. PoE max 134 watts, end-span
Auto detects PoE equipment and protects against damage by non-PoE equipment
PoE up to 100 meters
Layer 2 switch with auto-negotiation
IP30 aluminum metal cabinet, DIN Fittings
DIN Rail and Wall Mount
48V DC Redundant Power Input
EFT Protection Up to 6kV for Power Line
6kV Protection on Ethernet Port
-40 to + 75 ° C & nbsp;