RS232 / RS422 / RS485 / LPT Parallel

• PCI Express x 1, 2x RS232, RS422/485
• RS485 ART (Automatic Receive Transmit control), RS485 in 3 operation modes
• optical isolation, surge protection (also in RS232), Compact board size (half-size)
• Built-in termination resistors

Module to Can 2.0a and B
ISO 11898-2 standard
Baudrate 10Kbps for 1M bps
software for setting CAN and RS232 / 422/485
Transparency between RS-232 / 485/422 Via CAN bus
Full duplex on RS-232/422 units are not supported
CAN Bus Baud Rate Configuration
CAN Accept Filter Configuration
CAN 2.0A or 2.0B Specific Choice
RS-232 / 485/422 Baud rate and data file setting
RS-232/485/422 Respond Options
Setting: Normal or pair connection

Mediekonverter fra seriel til optisk fiber
Point til Point transmission
RS232 eller RS422 eller RS485
Op til 40 km med single-mode
ST stik - duplex
Til 9/125my single mode fiber
Reducerer signalinterferens
Beskytter mod elektrisk interferens
Baud rate op til 921,6 kbps
Temperaturområde: -40 til+75°C
Forsyningsspænding: 12 - 48VDC
Mål: 100 x 90 x 22 mm
DIN beslag som tilbehør

One CAN bus interface
Supports both CAN 2.0A and CAN 2.0B
Up to 1Mbps CAN transmission speed
2KV isolation
Drivers support Windows® 7/ 7 x64/ 8/ 8 x64/ 8.1/ 8.1 x64
Dimensions: 51 x 30 mm
Cable included

Connects CAN-Bus via mPCIe slot
USB 2.0 Full Speed signals on mPCIe
Supports CAN 2.0A / 2.0B, up to 1 MBit/s
CANopen supported by CANFestival
SAE J1939 protocol supported by the J1939 API
Drivers for Windows, Linux and Mac OS X
LEDs for CAN and Error
16KV ESD surge protection
DB9-connector included

Easy to use
DIP switch for disconnecting and connecting signal (easy to connect external cables/props)
Branch too high signal
Red for low signal
RS232 8 signals DCD, RXD, TXD,, DTR, DSR, RTS, CTS, RI.

MOXA:

Break out board with DB15 female connector.
1 x DB15 female (2 rows)
2 x 8 pole screw terminal block
Not in the house

Mini PCI Express til SD adapter

MOXA CBL-RJ45M9-150 - Serial RS-232 cable - RJ-45 (male) for DB-9 (male) 1.5 m -
For Moxa CN2510, CN2610, CP-104, Opt4, Opt8; NPort 5210, 5610, 5630 asdf

2 x RS232 serial ports with plug & amp; play
1 x TITAN BSP9216B (chipset)
1 x DB25 male connector on the card
1 x DB25 female for two DB9 male adapter cables included
Bus: universal PCI (5V and 3.3V) 32 bit 33MHz
RS232 signal: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Max. bitrate: 921.6kbps
Each port with 16 bit FIFO for transmit & amp; review
IS support: Windows, Linux
0 ° C to 60 ° C

Two 16550 High performance UART (RS232) serial channels
Occupies one PCI or PCIe bus slot
Low Profile PCI Form Factor
Includes Low Profile PCI & Regular size PCI two brackets
Both USB A type and USB pin header connector on board to host connection
One RS232 DB9M and one RS232 10pin RJ45 serial ports on board
Includes one 10pin RJ45 – DB9M Bridge cable for 2nd DB9M port
5VDC Power output from each DB9M Port for POS device use application
2 Jumpers Individually enable / disable 5VDC output for each DM9M Port
On Board Molex mini 4Pin Power connector for sufficient DB9M 5V bus power from PC power supply
Supports 32bit/64bit Windows 7, Vista, XP, 2000, ME, 98SE

Rest storage

Your bracket in Alu
can be used up other devices

USB-C - Serial RS232 Adapter cable
USB Type C Han to 9-pole RS-232 Han connector with finger screws
Download speed 1 Mbps +
Supports Remote Wake-up and Power MM
1.8 meters

Mini PCI Expressadapter til PCI Express, med simkort holder

Serial card for universal PCI, low backplane Universal PCI 3.3 / 5.0V
1x RS232
UART 16550 (16 Byte FIFO)
Speed 921 kbps
PCI Plug and Play
Drivers for Windows 95 for Win 7 / 2008 R2
Software compatible with DOS, Windows 3.11, OS/2, Linux and various. Unix

1 meters kabel til SER8PCI-K+ med 8 x DB9

RS232 til TTL-konverter, DB9 hun inkl. kabel

RS232 til TTL-konverter, DB9 Han inkl. kabel

Get a COM port on the PC via the USB port
USB to RS232 7 or 8 bit
RS232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Up to 921.6 kbit/s - FTDI chip
DB9 male