

RS232 to WiFi Adapter - Connect RS232 Devices Wirelessly
DB9 female connector
1200 to 921600 baud
Supply 5 to 24 volts via USB or screw terminals
Built-in WiFi antenna
USB adapter cable included
Monitor, manage and manage industrial devices
1 x RJ45 Ethernet port
2 x SFP slot for fiber transceiver (SM or MM)
Industrial EMC protection, temperature operation wide, -40 ° C ~ 85 ° C
Fast-Ethernet 2 x 100/1000 SFP Slots with RSTP Redundancy
4 software Selected RS485 / RS422 Serial ports, up to 921Kbps
TCP Server / Client, UDP, Virtual com and tunneling modes supported
Embedded Security with PPTP, IPSec or OpenVPN Client / Server
Redundant 12 ~ 48 VDC Power Entries
Configuration via Web Browser / Serial Console / Telnet / Windows Utility
Robust Metal Cabinet with wall or DIN rail
Newest generation 4-port serial port server with redundant network port from Atop. The redundant network port ensures the network connection in error and cable break with a shift time from port to port of 200 ms. Eth4ser-A-I is a serial port server for Ethernet network, for example. local area and / or internet. The dual network port with Auto Fallback continues to ensure operation of less than 200 ms if one of the network connections fails. The serial ports are set as RS422 or RS485 with speed up to 921.6 kbit / s. The ports can each be set up in different ways; eg. Can serial port 1 set to Virtual COM Mode, serial port 2 for TCP server, serial port 3 for TCP client and serial port 4 for UPD mode. Eth4ser-A-I has 2 kV isolation on the serial ports, but has only RS422 / 485 ports and screw terminals instead of DB9 connector
DB9 female connector
1200 to 921600 baud
Supply 5 to 24 volts via USB or screw terminals
Built-in WiFi antenna
USB adapter cable included
2-port RS422/485 serial device servers, MOXA NP5232I
Compact design for easy installation
Socket modes: TCP server/TCP client/UDP
Easy-to-use Windows utility for configuring multiple device servers
Supports 10/100M Ethernet
Patented ADDC® (Automatic Data Direction Control) for 2-wire and 4-wire RS-485
SNMP MIB-II for network management
External COM ports via Ethernet and Internet
3-in-1 Serial Port: RS-232, RS-422, OR RS-485
Modes: TCP Server, TCP Client, UDP
Ethernet Modem
Pair Connection
Real Com / Tty Drivers for Windows and Linux
2-wire RS-485 with Patented Automatic Data Direction Control (Addc®)
Built-in 15 kV ESD Protection for All Serial Signal
4 COM ports via optical fiber cable
point to point or pount to 4 points
4 x RS232 ports up to 2km with multi mode cable
4 x RS232 ports up to 20km with single mode cable
Buy 100Mbit SFP Module (Multi Mode or Single Mode)
1 x 100 Mbit SFP for LC Duplex Fiber cable
4 x RS232 DB9 male connector
Setup via built-in Web server
62 x 50 x 120 mm
DIN fittings
Display 3 LEDs Displays TX / RX, Network and System Status
Supply voltage: 9 - 32VDC Redundant (not supplied)