

5VDC 2 Amp (7.5Watt) mains adapter from 100 - 240VAC. connector: 3.5/1.35mm, switch mode
Switch mode type
5VDC 2A mains adapter
DC plug. 3.5/1.35mm
External COM port over Ethernet and Internet
RS232/422/485
Baud rate: 1200 - 230.4kbps (2-wire)
Max. baud rate at 4-wire RS485 up to 921.6kbps
Atop SE5201-DB Serial Device Server
10/100Mbit Ethernet.
Serial port via DB9 male connector
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Power is supplied from 9 - 30VDC or 5VDC (power jack)
Power supply not included
DIN kit (option)
Dimensions: 65 x 78 x 28mm (without wall bracket)
Dimensions: 88.5 x 84 x 27.8mm (with wall bracket and DB9 port)
With the ETH1SER-MINI+, a virtual COM driver is supplied that installs a virtual serial port (RS232/422/485) on the PC as if it were a physical port. The ETH1SER-MINI+ can be set up with an embedded Web server, Windows setup program or the serial port. ETH1SER-MINI+ has a single serial port for e.g. local network and/or internet. A simple Windows program is included which automatically finds all ETH1SER-MINI+ on the network so they can be set to an optional IP address.
Power is supplied from 9 - 30VDC - or 5VDC via power jack connector. Power supply not included - additional purchase may be required. DC5V/1.5ARQ
Switch mode type
5VDC 2A mains adapter
DC plug. 3.5/1.35mm
1 channel software-selectable RS-232/485/422 port
Baud rate: 1200 - 230,400 / RS485 921,600
Screw terminals for Data
Screw terminals for DC supply
1 x 10/100 Mbps RJ45 Fast Ethernet port
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Modbus TCP/RTU/ASCII
Configuration via the web server side, the Telnet console and the Windows Utility
Upgradable firmware via Ethernet from a remote PC
Robust metal cladding; industrial EMC protection
Redundant dual DC inputs for non-stop operation
Optional DIN rail mounting
Supply: 9 - 30VDC or 5VDC / 9W
Dimensions: 78 x 65 x 28 mm
Temp: -40 - +70°C
External COM ports via Ethernet and Internet
Compact design for easy installation
Socket modes: TCP server/TCP client/UDP
Easy-to-use Windows utility for configuring multiple device servers
Supports 10/100M Ethernet
SNMP MIB-II for network management
MOXA: CBL-RJ45F25-150
RJ45 to DB25 female
External COM port via Ethernet and Internet
RS232 Serialport via DB9 male
Power supplied from PoE
can be powered from 12 - 48VDC / 1.7 watts
Short Power Jack Pigtail Cable included
Purchase Power supply, not included
1 x RJ45 with PoE input
DIN mount
Operating temperature: -25 - + 75 ° C
Dim: 90 x 52 x 27 mm