RFID / Barcode / Magnet stribe / TAGs / POS

Supporter NXP Desfire EV1 / EV2 Read / Write
Supporter Desfire Tags
Supporter Auto Read Desfire UID / Block
Reading distance: Up to 5 cm
built-in two-color LED and Buzzer
API Development Shooting Included
Support Decimal, HexideCimal and ASCII ID Formats
Supply Voltage: USB from PC
Unique Serial Number Identification (UID)
Operating temperature: -20 to + 65 ° C
Dimensions: 62.3 x 87.7 x 18.4 mm

Mifare Desktop 13.56MHz RFID reader
NFC 1-4, ISO 14443A, ISO 15693
Other formats on request
HID, Keyboard emulation
Can be programmed for Virtual COM
HEX or Decimal, ordered upon purchase
13.56MHz
5VDC/100mA
-20 - +60°C
Dimensions: 100 x 65 x 25

Keyboard emulation: 8 digits, 32-bit ASCII, Decimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating Temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model

Personell who shall document the route with the date and time
RFID TAGs placed at check-points and has unique ID
RFID TAG is 125kHz EM400X
guard pointing toward Days and press the scan button
Each TAG reading acknowledged with short vibration
Operation with a pressure
Journal memory: approximately 14,000 items
battery - easy to replace
up to 55,000 scans at full battery
interface is USB
Operating temperature: -10 to + 55 ° C
Patrol Tour Manager software included

RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)

Long Range 2.45GHz RFID reads and writes for 140 m Range
Programmable parameter
1 x RJ45 (10/100 Mbit)
1 x RS232 (RX, TX)
1 x RS485 2-wire Protocol: ICMP, ARP, IP, TCP (Server / Client), UDP, DHCP, HTTP
Supply voltage: 7 - 15 VDC / 4 Watt
Dimensions: 107W x 138h x 30D (mm)
Weight: 222g
easy installation

Active RFID Tag with key ring and vibration sensor
2.45 GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless tag programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified

Active RFID Take with key ring pendant
2.45GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless TAG programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified

Active 2.45GHz RFID TAG
2.45GHz read/write
Range up to 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
Wireless programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
Built-in SOS button

Active 2.45GHz RFID TAG card
2.45GHz read and write
Transmission distance 140m
programmable parameter
Supplied without 2 x 3V CR2032 battery
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
wireless TAG programming

Active RFID Tag as bracelet with 2 x temperature sensor
with light sensor
2.45 GHz Read and write
Dimensions: 44W x 30h x 11d (mm)
Weight: 23.4g
Wireless programming Digital RSSI / LQI data
low battery warning
built-in button
FCC, CE certified

Active RFID Tag as bracelet with light sensor, anti-tamper
2.45 GHz read and write
Dimensions: 44W x 30H x 11D (mm)
weight: 23.4g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified

Zebra 8000T Z-ENDURE

S/H bånd til 1000 kort (til PRINT-ID/PRINT-ID-MAG)

Evolis R2011

Kan indsætte diverse formateringstegn, f.eks. linjeskift.

Programmerbar magnetkortlæser med PS/2 interface. Lysdioder sikrer optisk kvittering, akustisk lydsignal ved korrekt aflæsning af magnetkort.

MCR-BARCCD-K kan læse både magnetkort (spor 1 og 2) og stregkoder.

Tilsluttes RS232 (serieporten)

Farvebånd til 200 kort (til PRINT-ID/PRINT-ID-MAG)

Evolis R3011 color ribbon

Opsætnings softwaren virker kun på en Windows XP pc der har en PS2 keyboard port

Can read maps where the magnetic strip turned toward or away from the user
HID - keyboard wedge

NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!

Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)

Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required

BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!

Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)

Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC

IC / RFID / MAGNET motor reader
USB interface
three in one card reader
example. kiosks and the like
Automatic in / out

1D barcode scanner with RS232
for stationary mounting
very compact
5vdc
Scan Mode: Continuous or by command
Up to 360 scans per second
Dim: 50 x 18 x 37 mm
Weight: 65g with cable
Cable length: 1.8m

Multi 13.56 MHz Mifare Reader
RS232 Connection
5VDC (Power Jack 5.5 / 5.1mm) Not included
Cabinet: ABS, indoor IP65
Dim: 88 x 56 x 18 mm

Mifare reads with USB
13.56MHz
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: ISO14443A, ISO18092 FeLiCa tags
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase

Ceramic UHF Take against metal
survive Temp: -40 - + 250 ° C Short-lived
can autoclaved several times
operating temp: -40 - + 85 ° C
Alien Higgs-3 chip < Br> Objective: 10 x 5 x 3 mm
Weight: 0.8g
reading distance: Up to 3 meters (1 watt reader)
suitable for location against metal - can give better reading distance
read / write : 100,000 times
Data Storage: Over 10 years
IP68 

MDB Cable with USB Converter
USB-COM Port FT232RL
for integrating PAY terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm

MDB Cable with RS232 Converter
for integrating Pay Terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm

ISO magnetic card with High Coat magnetic stripe.
Can be delivered with color printing for extra payment.
Cards with the same print for quantities of 25 or more. and up.
Price is per piece.

Reader/Writing Tracks 1, 2 and 3
Standards IBM, ISO, ANSI, DIN
USB With Emulation of COM Port
Dimensions 65mm × 215mm × 58mm
Supports only ASCII (no special signs)
Supported with 24VDC 2.2A power supply

Reader/Writing Tracks 1, 2 and 3
Standards IBM, ISO, ANSI, DIN
USB With Emulation of COM Port
Dimensions 65mm × 215mm × 58mm
Supports only ASCII (no special signs)
Supported with 24VDC 2.2A power supply

Reads ISO tracks 1, 2 and 3
USB interface
Emulates a USB keyboard (HID)
Powered by the USB port
Reads e.g. health insurance card/health card - with æ, ø, å
Optional reading of tracks is possible with inserted end character
Omitting text in tracks is not possible.
Dimensions: L 137 x W 49 x H 50 mm

To track 1, 2 and 3
Connects via PS2 port
Software not required
data will be inserted where the cursor is (HID)
Sound, reading speed, line breaks and æ, ø and å can set
Weight: 200g
Dimensions: 100 x 34 x 28
cable length: 2 meters
supply voltage: 5VDC (from PC)

Kan læse kort hvor magnetstriben vendes mod eller væk fra brugeren

Kan printe QR koder

omvandlare

Tilbehør til MCRW123O+USB

Waterproof RFID reader
only with Wiegand Interface
Connect to access controls with Wiegand
TAG Type: EM / Mifare
Reading distance: 5.8 cm
IP68
Frequency: 125kHz / 13,56MHz
LED and Buzzer
Cable out from the back
Detachable Backpiece
Supply Voltage: 12VDC
Dimensions: 86 x 86 x 22mm

Wired 2D Handheld CMOS Barcode Scanner
for Versatile Use
1D Standard and 2D
PDF417, QR Code, Datamatrix
USB Cable Connection
Hands Free Scanning
Operating Temp. -20 ℃ ~ 60 ℃, IP42 close

Stregkodescanner, desktopmodel, 1650 linie / sek, afkodet, USB

Quick installation (no screws needed)
Can read QR and Barcode from phone screen!
Supports most 1D and 2D formats
USB1.1, HID-KBW, HID-POS, Custom HID
RS232 (option)
High Speed
IP66-tight
90ms read speed
Reading distance: 0 to 11 cm
Buzzer
OS Support: Win XP/7/8/10, Android, Linux, Mac.
Operating temperature -20 to 70 degrees
Dimensions 101.5 x 78.5 x 48 mm (hole cutout 640x480mm)
Print contrast min. 25%
5VDC

IC / RFID / MAGNET motor card reader
USB interface
3 in a card reader
Automatic card operation from 2 pages
For example. parking lots, payment terminals, kiosk etc.
4 PIN PSU interface

Dimensions: 119.6(L) x 76.6(W) x 15(H)mm

Passiv 865 MHz RFID holder til RFID865TAG-W

Bluetooth RFID reader with WiFi incl. Holder and battery

Demo model!

Fanless
4 x COM (DB9, with power output, +5VDC/+12VDC, selectable by Jumper)
2 x COM (Internal, reserved for VFD Customer Display and MSR)
1 x DB25 Parallel Port
5 x USB 2.0 (External, 4 x bottom/ 1 x side)
RJ-45 Gigabit LAN
VGA
1 x 12VDC (Output) Jack for Customer Display or 2nd Display
1 x RJ-11, +12/+24 VDC (Cash drawer)
+12VDC 60W, 4-pin Connector with Lock
355 x 302 x 204 mm

Kvitteringsprinter
Termisk
Stikdæksel
Hovedapparat
Dæksel med aktiveringsknap
Rullepapir
Styreplade til 58 mm bredt papir
PS-180 & AC-kabel

Kan læse kort hvor magnetstriben vendes mod eller væk fra brugeren

Universal electric car charging stand for all EV vehicles
Allow two electric cars to charge at the same time
Smart design
Dynamic management of charging
Interface protocol: OCPP 1.6
Payment for parking and charging by payment card
Monthly fees apply
AC Input 230-400 VAC +/- 10 (2 or 3 phase)
Total Power output 2 x 22kW / 2 x 32A Max (load sharing)
Payment: Payment card, Google Pay, Apple Pay (option: MobilePay)
Communication: 4G
IP degree: IP55
Operating temperature: -25 C° to 55 C°
Dimensions: 520 x 360 x 260 mm
Charger cable not included. The user uses the cable that comes with their car.

Dual band RFID card reader for USB - 10 Decimal
125 kHz: EM-Marin EM41xx, EM4200
13,56MHz: Mifare - ISO14443A
HID - Keyboard Emulation
Reading distance: 5 to 8cm
Powered by USB
USB interface
operating temp. -10 ° to + 70 ° C
dimensions: 98 x 63 x 10mm (L x B x H)

Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
Dip-SW to ID format setting - see Table 
Environment: IP67 Waterproof, outdoor mounting
operating temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm

Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443a / B / 15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
ID Format setting with DIP switches - see Table
Operating Temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm

Dual band RFID TAG card
2.45GHz and 13.56MHz Mifare read/write
Programmable parameter
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
Combine active and passive RFID
Long operating time on battery
Wireless TAG programming
Supplied without battery (2 x 2032)

Dallas iButton tag med unikt indkodet nummer

Med indbygget touch skærm og bon printer

Trigger to open cash drawers with Epson, Citizen or Star interface

Trigger til at åbne pengeskuffer med Epson, Citizen eller Star interface

reads ISO tracks 1, 2 and 3

RS232 interface

Paper- Printer Accessories - Thermal

Reading distance: Read > 500cm, Write > 20cm
RFID tag: ISO-18000-6B, ISO-18000-6C
Operating frequency: 865-868MHZ, 902-928MHZ
Bluetooth 4.0, USB 2.0
RF output: 18~26 dBm(adjustable)
Rechargeable lithium battery
Standby time 150 Hours
Working Temperature -20C°C to +50°C
Windows, Android, iOS, Mac OS

Reading distance: Up to 100cm
RFID tag: ISO 18000-6C
Operating frequency: 865 – 868 MHz
Mode: Single Read / Multiple-tag Read
Bluetooth® 2.1 + EDR (Class2)
Interface: BT HID, BT SPP, USB HID, USB VCP, Memory
Rechargeable lithium battery
Working Temperature: -10 to 55˚C
Wireless Multi-Connected Dongle (Optional)

Genopladeligt Li-ion batteri, 3,7V, 1620mAh

RS232 Cable for Bargun Omni
Cable Length: 2Meter
DC Box located 20 cm from DB9 She connector.

Active RFID tag bracelet 2.4 - 2.48GHz
Output power -6dbm
Active operating mode
3 year battery life (depends on usage, can be changed)
0-80M distance
IP68
Weight: 40g
Operating Temperature: -40 ℃ ~ + 60 ℃
Dimensions: 250mm × 31mm × 15mm (L × W × H)

MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232

MDB Male and Female
DEX Male and Female

module with eight relay output
5VDC from optically isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A - non inductive load!

5V relay print
GND, VCC, IN
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A

5V relay print
GND, VCC, IN
COM, NC, NO
Max load: AC 250V / 10A DC 30V / 10A