Subcategories
Active filters
Load Button load cell for pressure measurement. Available from 10N to 100kN, stainless steel, IP60 / 65
Load cell for tension - button cell model
capacities from 0.01 KN to 100 kN (2.25 LBF to 22.5K LBF)
Overload protected
Temperature compensated
small diameter
Environmental sealed IP60 or IP65
Stainless Steel
Wireless tension-measure Load cell to crane, wire and the like. Available in 6 weight classes 5 - 100 tons
Pull-road cell for wire, cables, machinery - Wireless
Weight class: 5 - 100 ton
IP67 Environmental protection
Construction of stainless steel
Simple installation and operation
Wireless transmission range Up to 600 meters
long battery life
Wireless Load pin load cell in stainless steel. WiFi with WTS, range up to 600 meters. Weight class up to 1,36 ton
Weighing cell as a shakel pin can weigh up to 1,360 tonnes
Low power consumption for long battery life
Up to 600 meters range
Configured and calibrated via PC
Calibration using a base station and telemet tool set < Br> WiFi interface with WTS
robust lightweight house with built-in antenna
environmentally set for IP67
Wireless load cell in stainless steel as Shackle (shackle) for crane, wire-stag and the like. 4 weight classes up to 35 ton
Crosby shackel with built-in road cell - wireless transfer
4 weight classes - up to 35 mega ton
Economic-proof for IP67
certified shackle and load-pin
2.4GHz WiFi
Battery operated
Up to 12 shackles per measuring instrument
Order for desired weight class
Contact the sales department
Instrument shown is not included
Shackle load cell, type of Crosby. Series from 1 to 35 ton. To extreme conditions
Shackel med vejecelle til kran og lign.
Fås i 10 vægtklasser
Denne model fås fra 1 - 35 ton
Crosby shackle
Til træk
Designet til 150% overload
IP67
Bestil ønsket vægtklasse
Load pin load cell in stainless steel. Available up to 1,360 Mega ton. To replace bolt on line to crane and the like.
Weigh-pin to shackle or the like. For crane etc.
Designed pins or bolts for a load
stainless steel
used with fork arms or shafts to monitor loads
capacity up to 3.000k lbf. (1,360 MT)
custom Designs
Get Offer on This Product
Mechanical dimensions and Weight Need
Reaction Torque road cell. Available from 5Nm to 50Nm in 3 weight classes. Compact version
Reaction twist-load cells in miniformat
Available in 3 weight classes from 5 Nm to 50 Nm (44.3 lbf-in to 443 lbf-in)
proprietary interface
Temperature compensated Strain Gauges
Compact Size: 70 x 60 mm
Excellent linearity and repeatability
low deflection and high twisting stiffness
Order desired weight class
Reaction Torque load cell for measuring and calibrating torque wrenches and documenting of torque. Available in 6 weight classes
Torque-power measurement of e.g. fastner tools
can measure from 1Nm to 5 kNm - up to 500kg
No moving parts
Ideal for calibration of torque vrenches
Fits standard tool
Button type load cell for pressure measurement. Convexbt. Superior design and performance. Small and compact in stainless steel
Mini button cell for pressure measurement - sealed.
Available in 8 weight classes
superior to any other button cell
integrated temperature compensation
Improved eccentric load rejection
multi-point calibration
integrated loading button
Small diameter
environmental supplies
heat-treated stainless steel
125kN (12.5ton) Comp/Tension load cell. 300% overload Safe. Very robust made of best materials. Environmental compensated
Top-class load cell - proven construction
Available in weight classes from 1.1 - 223Kn (100kg - 22 ton)
proprietary interface Temperature compensated strain Gauges
Performance for 0.03%
eccentric load compensated
Low deflection
0.0008% / ° F (0.0015% / ° C) temp. Effect on output
Barometric Compensation
Shunt calibration
E74 NIST trackable voltage and compression calibration (optional)
Load cell for measuring torque. Rotating with wireless transfer to base. Can be customized
Load Cell for measuring torque on axle
can sit between power source and load
suitable for measuring electric cars etc.
capacity from 100Nm to 10kNm
simultaneous voltage and frequency on the output
Option with digital output via USB
Order required max. power and output format
S-Beam load cell for pressure measurement. Low profile up to 32mm. Available in 17 variants.
low profile S-Beam load cells
only for pressure measurement (Tension)
Available in 17 variants from 22 N to 9 kN
Performance of 0.05%
Very large sensitivity
Temperature compensated Strain Gauges
Mini Load Cell Series for pressure and traction measurement. Stainless steel. From 22N to 2200N. Waterproof model avalible
Environmental sealing drawing and compression road cells
proprietary interface Temperature compensated load meters
Drag and print
small size
Construction of stainless steel
variant for immersed in liquid
mV/V 2.0
For Strain Gauge with 350 Ohm
Select the model with Newton Specification that fits the task
Price depends on weight class and sealing
ATEX Certified Load Cell, Tension / Compression, 20KN (2000kg), Hermetically sealed, loop-powered with 4 - 20mA output, 0.05%
Explosion-proof Load Cell
EX certified - hermetically sealed
load cells for tension and compression, 2 ton
Suitable for the oil industry and the like.
Loop-powered with 4-20mA outputs signal
Precision: 0.05%
Programmable Load Cell Instrument and controller, LCD Display, Connection up to 16 Load Cell, IP66 NMEA 4X
Top-class weighing instrument from Interface
LCD screen, W x H - 117 x 86 mm
Display up to four channel channels per screenshot
With required Legal for Trade information
32 scale accumulations
Millivolt calibration, 5-point linearization and geographic calibration
NEMA Type 4X / IP66 stainless steel enclosure
Selectable A/D with measurement speed up to 960/second
100 set points, 30 configurable
64K uses built-in Non-V RAM
Power for 16, 350 ohm load cells per A / D card
Peak team
Turn torque Load cell with rotating shaft. 12bit resolution. +/- 5 or 10V output. Stator with flange foot. Max. RPM 15,000
Load cell with shaft for measuring torque
capacities from 0.1Nm to 1kNm
speed up to 15,000 rpm
± 5vdc output (± 10vdc optional)
12 - 28vdc supply
Contactless data transfer to Stator
Digital electronics with on-shaft shunt
0.2% Combined error
10 kHz Sample Rate
12-bit resolution
measurement of speed and angle
3 Axis Load Cell. Low Profile. 22Kn. Simultaneous measurement of force and torque.
3-axis Load cell with 3 outlets
simultaneous measurement of pressure and torque perpendicular to the pressure axis
Pressure axis works according to the same specifications Standard model
pressure stiffness and torque stiffness are both very high due to the Low Profile construction.
3 Axis Load Cell pressure and pull in 3 plane. 120kN. 3 pieces Strain Gauge Bridge. Compact. Temperature compensated
3-axis - ForceX, ForceY, ForceZ Load cell
3 x Strain Gauge Bridges
Series from 10n to 500 KN Power Area
Current model is for 120kN
Compact Size
Low Cross Talk
mV/V output
Temperature compensated
Made in Aluminum - De-stressed material
Load cell in stainless steel. High-precision road cell. 110kN. To the extremely hard environment. Low Profile. Sealed.
Load Cell series for the hard environment
the series is from 12.5n to 445Kn
current model is to 111Kn
Temperature compensated Strain Gauge
%FS: 0.03% High Output: 4mV/V For high accuracy
very low Deflection
made of stainless steel
Hermetical environmental sealed
100 KG SINGLE POINT VEJECELLE
5 Kg. Single point vejecelle
60 Kg single point vejecelle
Vejeforstærker med RS232 udg
Vejeforstærker med RS232-udgang, standardversion
Loadcell 10 kg
Standard Cell m / M8 x 1.25 thread; Full load = 10 Kg
Vejecelle 200 Kg
Load cell 100 Kg, S-type, pull and pressure, 2mV / V
S-type load cell
impedance input: 410 ohm
Iimpedance output: 350 ohms
Exitation: 10 - 15V
4-wire
Thread in top and bottom: M8 x 1 , 25 mM
Full load = 100kg
Overload: max. 150%
Vejecelle 300 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=300 Kg
Vejecelle 500 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=500 Kg
Vejecelle 1000 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=1000 Kg
Vejecelle 100 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=100 Kg
Load cell 50 kg for drag and press
Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg
The load cell 5 kg S-beam, tensile and compressive
The standard load cell m / M8 x 1.25 thread
S-beam type
Full Load = 5 kg
Maximum load: 7.5kg
Last cell 20 kg
Standard cell m / M8 x 1.25 gevind; Full load = 20 Kg
Vejeforstærker med RS232 udg
Præcisions-vejeforstærker med RS232-udgang
Vejecelle 250 kg
Single point celle m/M8 x 2,5 gevind; Fuld belastning=250 Kg
Vejeforstærker (AC forsyning)
Vejeforstærker til forsyning med 110/220/240 VAC eller med 24 VDC
Lastcellen 1 ton
Tryck cellrad m / M20 x 1,5 gänga; Full belastning = 1000 kg
Load cell - Strain Gauge data logger up to 6-wire, 16bit, 4MB memory, 20ms sampling time, Battery operation, USB
16-bit strain gauge / weighing bridge amplifier - datalogger
With temperature compensation
Excitation sense 2.5VDC
Bridge input: +/- 8mV Version: 16mV and 32mV
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc.: Software to configure, download, plotting, analysis and an alarm (not supplied)
Configurable alarm controls
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
Portable load cell instrument. 4 Wire Strain Gauge input. Single pass calibration, direct, mV/V with TEDs
Handheld 7-digit LCD screen
4 Wire Full Bridge input
with Peak, Trough, Net, Overload and Shunt Cal Indication
Battery operation of 450 hours in power saving mode
Keys for ON / OFF , Interval Selection, Peak / Valley Hold and Gross / Net
Single Calibration (Direct mV/V) with double range for values such as kg and lb
Weighing only 250 grams
IP65 / NEMA4
TEDs Enabled to automatic Sensor calibration (IEEE1451 - Template 33)
Buy Leather case
Battery: 2 x AA
SMT OVERLOAD PROTECTED S-type road cell, 10N (1Kg)
SMT Overload Protected S-Type Load Cel
- Proprietary Interface temperature compensated strain gages
- Overload protected in both tension and compression
- Safe overload to 10X capacity
- High performance
- Low creep
- 1 to 450 lbf
Portable road cell instrument for strain gauge input. Multi-point calibration, direct, mV/V. Logging and graphing. With TEDs
Sovereign Linearity Specifications
Excitation Voltage: 3.3Volt
Resolution: 24bit
% FS: 0.0002
Measurement speed up to 2400 samples per. Second
High internal resolution (up to 500,000 Counts)
IP67 Searched cabinet
Battery powered (long battery life)
128 x 64 Graphic screen with backlight
More display modes (Peak / bottom, Delta, Live , gross and net)
logging and graphing for PC (software is included)
support Ted's template 33, 40 and 41
Live calibration and multi-point calibration
Dim: 170 x 94 x 42 mm
Weight: 330 grams