Dataopsamler til trådløse dataloggere - kun til T&D blå serie
Dataopsamler med display og USB
Kun til T&D BLÅ SERIE Dataloggere
Monitoring of premises, storage rooms, server rooms, installations, machines, refrigerators, freezers, food shuttles and the like, the DANBIT Datalogger modules are a good choice. Measurement and logging of temperature, humidity, atmospheric pressure, carbon dioxide, voltage or current are all with date and time stamp.
Measurement data can be displayed on a computer as graphs and values and can be exported as a csv file for...
Monitoring of premises, storage rooms, server rooms, installations, machines, refrigerators, freezers, food shuttles and the like, the DANBIT Datalogger modules are a good choice. Measurement and logging of temperature, humidity, atmospheric pressure, carbon dioxide, voltage or current are all with date and time stamp.
Measurement data can be displayed on a computer as graphs and values and can be exported as a csv file for statistical processing and report printing.
DANBIT A / S is a sole distributor of T & D Datalogger of very high quality, from Japan's largest manufacturer of compact units for measuring and recording temperature, moisture, voltage and pulses.
The data logger is battery powered, very robust, waterproof and for installation without cable routing. The data logger can be included in a permanent monitoring system or temporarily placed in a location where monitoring is desired. T & D offers data logger products, where measurement data and graphs can also be displayed on Smartphones.
Subcategories
There are 96 products.
Dataopsamler med display og USB
Kun til T&D BLÅ SERIE Dataloggere
Air quality tester that can show if there is gas in the air.
Can be used as a MODBUS RTU sensor, the host can be accessed via RS-485.
Wireless temperature logs with WiFi, Bluetooth
Battery operation from 10 days (1 measurement per minute Auto-Upload)
Battery operation Up to 1 year (1 measurement per Time Auto-upload)
Longer battery operation at Bluetooth Off during logging
2 x 8,000 measurements in memory with date and timestamp
acquisition external thermocouplers (K, J, T, E, S, R)
accuracy: 0.1 ° C / 0.2% (S and R )
Feeling Response Time: Sensor FREE
Free Cloud Service: TD WebStorage
LCD Display Displays Current measurements
PC software: Tools and presentation included
USB port
Dim: 78 x 58 x 26 MM
Battery type: AA
LCD Display
Active kWh (positive and negative), quadrant reactive
Undervoltage, undercurrent, overcurrent, underload
RS485 MODBUS RTU
4G for data (SIM card not included)
Cloud price is not included
Operating temperature -20℃~55℃
IEC 62053-22:2003,IEC 62053-21:200
Dataopsamler med USB og forstærkerfunktion
Kun til T&D Dataloggere
Wireless Temperature and moisture præsicions logger with memory
Sending measurement data to Data Collector (Base Station) at 870MHz
Distance between Data Logger and Data collector up to 150 meters
Battery operation up to 10 months at an upload per day
Data Logger is not on-line
2 x 8,000 measurements in memory with the date and timestamp
Accuracy of measurement: max. + / - 0.3 ° C range depending
Removable external sensor. Close O-ring
Free Cloud service: TD WebStorage for Data Collector
LCD display shows current measurements
PC software: tools and presentation included
Data Logger setup with Data Collector Optical
Dimensions: 62 x 47 x 19 mm
Fixed antenna: 24 mm
Battery type: LS14250 x 1
USB LOG Mxxx Device Server for data acquisition
Connects LOG Mxxx data loggers to Ethernet
Transferring Log data to PCs with LOG SiteView SW
Real-Time Data-view
Supports transfer via Internet and Ethernet
Up to 5 LOG Mxxx can be connected via USB HUB
Up to 5 clients can receive LOG data while
access is password protected
Powers LOG Mxxx with excitement
Dimensions: 110 x 100 x 38 mm
Supply voltage: 12VDC / 1A (PSU is included)
RS485 / RS422 / RS232 converter for Meter-Bus meters, actuators, etc.
Supports up to 100 Meter-Bus meters (slaves)
Selecting the serial port, only one can be selected to be active
2 x Baud rate (M-bus and COM port can be selected at different speeds)
Baud rate: 300 to 115,200 bps
Transparant data - no protocol conversion
M-bus connection is 2-wire , max. 350meter.
larger distance up to 5km requires a number of M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm | Removable terminal blocks
Operating temperature: -25 - + 75 ° C
DIN bracket
Robust plastic housing
RS485 / RS422 / RS232 Master Gateway to Meter-Bus Slaves (sensors, actuators, etc.)
Supports up to 100 Meter-Bus meters (slaves)
MODBUS RTU function codes: 0x03 and 0x04 readdata
Selection of serial port, only one can be selected to be active
Baud rate x 2 (M-bus and COM port can be selected at different speeds)
Baud rate M-bUS: 300-2400 bps
Baud rate COM port: 300-115200 bps
Transparent data - no protocol conversion
M-BUS connection, 2-wire, max. 350meter.
Greater distance up to 5km requires a number M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm
Removable terminal blocks
Operating temperature: -25 - + 60°C
DIN mount
Robust plastic case
1-axis vibration measurement
Frequency range: 10 Hz to 1K Hz
Amplitude range: ±8g
Data Format:
Acceleration(mg): RMS, Maximum, P-P
Velocity(mm/s): RMS
Top 10 spectrum values(Amplitude/Frequency)
Crest Factor
Supported Modbus RTU Slave protocol
Size: 51 x 30 x 19mm
Supply voltage: 10 - 30VDC
Temp: -25 - +75°C
Web based controller with 8 digital inputs
Digital High is: +4 - +26VDC
8 x digital inputs Opto-isolated
Common ground
200Hz Counter - 24bit
Tasks: 50 Schedule Planned, 50 Conditional, 20 Tuffer Terms
Email Alarms by defined conditions
Supports encrypted e-mail servers such as Gmail
RTC with NTP server synchronization
No software required
Graph (Logged data)
HTTPS / TLS encrypted
Static or DHCP IP Address configuration
Modbus, SNMP, Remote Service, IP Filtering
On-site update
Supply voltage: 9 - 28VDC
Dim: 98 x 78 x 36 mm
Multi-band 4G LTE Cat.1 controller, logger and alarm
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C
4 channel data logger with display
External memory with SD slot
USB port for PC
input: DC to 100Hz
+/- 0.3 Volt to +/- 24 volts
2ms Log -Interval with 10 Microvolt resolution
Log intervals: 2 MS to 60 minutes
Number of log intervals: 23
Daisy-Chain 4 x Log-MCR4V
Battery operation: 4 days to 130 days, dependent on logging
External power supply: Micro-USB adapter (not incl.)
Multi input data logging for up to 70000 login
10/100 Mbit Ethernet
Password protected, web-based configuration and control
4 digital inputs, compatible with S0 pulse interface
6 analog inputs with 0 / 10V and 0 / 20ma
Modbus RTU interface for up to 24 sensors (registers)
Up to 24 channels for monitoring
Up to 24 Independent Alarms
SNMP V.2 Support - SNMP Trap - Alarm Alerts
HTTP and SNMP port change - HTTP API commands
Periodic HTTP post of XML / JSON Status files for client server systems
Modbus TCP / IP support
Dynamic DNS with dynns, no- IP and DNS-O-MATIC Support
NTP protocol support
supply voltage: 10 to 32V DC
Wireless Temperature and humidity logger with WiFi, Bluetooth, USB
Battery operation from 10 days (one measurement per minute auto-upload)
Battery operation up to 1 year (1 measurement per hour auto-upload)
longer battery operation of Bluetooth turned off during the logging
2 x 8,000 measurements in memory with the date and time stamp
external temperature / humidity sensors
temperature: 0 - + 55 ° C
humidity 5 - 95% RH
Accuracy: +/- 0.5 ° C
Accuracy: 1% RH
sensor response time: ca. 7 minutes
Free Cloud service: TD WebStorage
LCD display shows current measurements
PC software: tools and presentation included
USB port
Dimensions: 78 x 58 x 26 mm
Battery type: AA
Remote-controlled 230VAC power rail with on/off per output
1U 19" for rack mounting - rack bracket included
8 x 240VAC C-13 outlets
1 x C20 input plug. C-19 plug not included
Switch on / off Server via the network / Internet
User interface is via Web browser
Wi-Fi connection
Password protected
Supports iPhone and Android
Temperature, humidity, UV. Lux data logger with memory
measurement data for PC via USB port
measurement data for PC via RS232 Port
8,000 measurements per Type in memory with date and time stamp
Luminance: 0 - 130,000lux
UV intensity: 0 - 30mW / cm2
External sensors
Free Cloud Service: TD Webstorage for data collector
LCD Display Displays current measurements
PC Software: Tools and presentation included
Dim: 78 x 55 x 18 mm
Battery type: AA X 1
Residual sale
2 channel temperature logger with external sensor
Temperature sensor: -40 - + 140 ° C
Freedding temperature: -40 - + 80 ° C
1 x RJ45 Ethernet
1 x Power Jack 3.5 / 1.5 mm 6VDC
Wired LAN temperature and moisture logger, USB
Battery operation from 10 days (1 measurement per minute Auto-upload)
Battery operation Up to 1 year (1 measurement per hour Auto-upload)
2 x 8,000 Memory measurements with date and time stamp
External temperature / moisture sensors
Temperature: 0 - + 55 ° C
Moisture: 5 - 95% RH
Accuracy: +/- 0.5 ° C
Accuracy: 1% RH
Feeling Response Time: Approx. 7 minutes
Free Cloud Service: TD Webstorage
LCD Display Displays Current measurements
PC Software: Tools and presentation included
USB port
target: 78 x 58 x 26 mm
Battery type: Aa