DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication...
DANBIT offers many different Ethernet switches. We can only show a representative part on our website.
If you cannot find the switch that fits your task, please contact us by email or phone and we will find the one that can solve the task.
The purpose of a network switch (Ethernet switch) is to connect other network devices to each other.
Good and stable network switches are very important communication devices that allow data communication between different network devices locally and the World Wide.
The network switch handles the flow of data across a network, also called back bone, by only sending a received network packet to the one or more devices to which the package is intended.
Each network device connected to a switch can be identified using the network address, the IP address, so that the switch can control the flow of traffic that maximizes network security and efficiency.
There are 2 basic versions of Ethernet switches, the simple ones -managed switches that route data to the ports that the telegrams want. The more advanced Ethernet switches are "managed" switches, where there are a lot of setup options to control and optimize the data flow and, not least, increase data security, also in the context of cyber crime protection. A switch can be built up with up to 7 "layers" which each have their task. For example, layer 3 is for controlling IP multicast (IGMP snooping - for example, video distribution), some router functions, IP routing at VLAN configuration.
The network switch is found everywhere and plays an integrated role in most modern Ethernet local area networks (LANs). Medium and large networks contain a number of managed switches. Small and small systems typically use an un-managed switch or the LAN ports that an Intenet Router is equipped with.
An Ethernet switch can be for both PDS cables (RJ45 cables) and optical fiber cables and many Equipped with ports for both cables.
DANBIT offers a host of different network switches, ranging from PoE Switch to industrial 24-port managed switch with built-in SFP ports. See the great selection here.
There are 86 products.
RJ45 Cat 5e / 6a
Wall installation to 8-conductor (8P8C)
TIA-568A / B colored Heating installation
No tools are needed, easy installation
Moxa Industrial Managed Switch ED6008
8-ports managed switch
4 port PoE pass through - 10/100/1000Mbit
1 x RJ45 PoE in (data + PoE++) - 95 Watt
Mid-span and End-span
4 x RJ45 PoE out (data + PoE+) - 30 Watt
PoE out pin: +1/2, -3/6
PoE output power, total is max. 75 Watt
PoE input voltage 50 - 57VDC
Temperature: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
Your bracket
Demo Item - Without Packaging or Accessories
Korenix Jetnet 5010g
7 x 10/100 RJ45 Ethernet
3 x 10/100/1000 RJ45 Ethernet / SFP Combo Ports (10/100 / 1000 Base- T, 100 base-eg, 1000 base-x)
supply voltage: 10.5 ~ 60 VDC
Operating temperature: -25 ~ 70 ° C
Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS
8 x 10/100 / 1000BASE-T RJ45 Auto-MDI / MDIX Ports
2 x 1000BASE-SX / LX / BX SFP Interface
8 POE Injector Ports with 802.3ay / of
PoE Standard 802.3at
60GB non-blocking
32Mbits Data buffer
IEEE 802.3X pause frame for duplex
IP30 aluminum
Din rail kit and wall mounting
Alarm relay 1A, 24V DC
2 x Digital output (DI)
2 x Digital output (DO) 24v DC, 100mA max
Dimensions: 72 x 107 x 152mm
Weight: 1684g & nbsp;
Supply: 48-56 V DC
16 x 10/100/1000Mbit RJ45
16 porte med PoE Ultra (75W per port)
4 100/1000BASE-X mini-GBIC/SFP slot
2 10Gbit SFP+ slot
RJ45 console interface til management og opsætning
PoE maks. er 400Watt, end-span og mid-span.
PoE power feeding op til 100 meter
Total PoE management
IGMP Snooping
MLD Snooping
Maks. 8 VLAN interface
Flexible modular configuration, 3 Module-dedicated slots
Up to 20 possible configurations in 4 power input versions
Up to 24 PoE ports, with maximum 720W of PoE power budget
4 x 1 Gigabit or 4 x 10 Gigabit SFP Uplink slots
RIPv1/v2, OSPFv2, IPv4 Static Routing, and Multicast IP routing
ITU-T G.8032 ERPS Ring, RSTP, MRP (client) and VRRP redundancy
Dedicated MACsec modules available for additional ultra-low-latency, high-throughput strong security
Rugged industrial design for -40° ~ +75°C harsh environment operation
PROFINET v2.33 CC-B conformance
EN50155 and EN50121-4 certified for Railway and Trackside applications
16 RJ45 Ethernet ports
10/100/1000 Mbps with auto-adjusting MDI/MDI-X
DIN-rail and wall-mounting
Metal enclosure rated at IP30
Dual power input for redundancy
8K MAC address table
Working tempeture -40 to 75 C degrees
12 to 48VDC input
Unmanaged 8 ports industriswitch
8 x 10/100Mbit med RJ45
IP50-tæt - metalkabinet
9 - 48VDC, 3,15Watt - Redundancy PSU input
Unmanaged 8 ports switch
Store-and-forward arkitektur
-40 °C - +75 °C driftstemperatur
8 x 10/100 Mbps speed auto negotiation
+10 ~ +30 VDC power input
DIN-Rail Mounting
Managed 8 + 2 Ports Gigabit PoE+ Switch
4 x RJ45 ports are up to 2.5Gbps with PoE++ (95W)
4 x RJ45 ports are up to 1Gbps with PoE+ (36W)
PoE Power Budget Is 240 Watts
with PoE insulation
2 x SFP slot for 1G, 2.5G and 10Gbit SFP module
RJ45 type RS232 console interface for switch control
up to 95W to 802.3BT / POH units
Detects automatic PoE Suitable devices (PD)
IGMP Snooping
Link Aggregation
Cyper Security
PoE Up to 100 meters
Dim: 330 x 200 x 45 mm
Supply voltage: 100 - 240vac
8 ports Unmanaged Gigabit Desktop Switch 10/100/1000.
Plug and play.
Effective, silent Gigabit switch in compact version.
Metal chassis.
Supply voltage: 12VDC / 1A AC adapter included
Unmanaged 8 ports 10/100/1000Mbit switch
1.5Mbits SRAM packet buffer
IP30 metal case
DIN rail and wall-mount
-40 to 75 degrees C operating temperature
12 to 48V DC input (power supply is not included)
8 Ports Managed Switch With Fast Recovery and Ring
Erps (Ethernet Ring Protection Switching)
8 x RJ45 10/100/1000Mbit Switch
Store and Forward Architecture, Broadcast Storm Checking
1.5mbits SRAM Packet Buffer
Automatic Address Learning and Address Aging
Supply paging: 12 - 48VDC or 24VAC
8 port 10/100/1000Mbit unmanaged switch in mini format.
Metal chassis.
100 - 240VAC. 9.6 Watts.
AC plug on the back.
VLAN Isolation
Temp: -10 - +70°C
Dimensions: 168 x 93 x 32 mm
Unmanaged 8 ports industry switch & nbsp;
8 x 10/100 / 1000Mbit with RJ45
IP30 -Set metal housing
9 - 48VDC, 4Watt - Redundancy PSU input
8 ports Unmanaged Desktop Switch 10/100.
Plug and play.
Efficient, silent switch in compact version.
Plastic chassis.
Supply voltage: 5VDC / 0.55A mains adapter included
Dimensions: 85mm x 135mm x 60mm
8-port Unmanaged 10 / 100M + 2-port Gigabit RJ45
2 x 1000BASE-X mini-GBIC SFP combo interface
PoE + is 32 Watt
Total PoE power is 120 watts
IEEE 802.3af / to End-span
Each port provides 52VDC to PoE equipment
Auto deteketere PoE equipment
Provides power to the max. 100meter
Extended mode without PoE, the distance up to 250meter
Equipped with smart LCD
Normal, VLAN, Extend
Supply voltage: 100 - 240VAC
Dimensions: 280 x 180 x 44 mm (1U)
8 port 10/100/1000Mbit unmanaged switch in mini format.
Powered from PoE or 5VDC (PSU not included).
Additional purchases, if any DC5V/2A-RQ power supply.
Does NOT have PoE out.
Dimensions: 155 x 86 x 26 mm
Weight: 378g
Managed Industry switch to harsh environment
Cybersecurity SSHv2/TLSv1.2
Ethernet Ring Protection
e-Mark Certified (vehicles/ITS)
Can support 2.5Gbit SFP module
8 port industrial Gigabit switch, RJ45 with PoE+
Intelligent PoE
2 port SFP 100/1000/2500Mbps
Supply voltage: 12 - 48VDC / 7A
PoE power budget: 60W at 12V, 120W at 24V, 240W at 48V
Redundant power supply connection
IGMP snooping, MLD snooping
IEEE 1588 Time synchronization protocol
Modbus TCP real time (SCADA)
Extended temperature range from -40 to +75 °C
DIN rail or wall mounting
Dimensions: 152 x 107 x 77 mm
Managed switch with Gigabit ports
8 x 10/100 / 1000BASE-T RJ45 ports with PoE +
Up to 36 watts for each PoE port
Total PoE power is 240Watt
2 x 100 / 1000BASE-X mini-GBIC / SFP
IGMP Snooping (Multicast)
Operating temperature: -20°C to 70°C
Can be wall mounted, magnetic wall mounted or DIN rail mounted
Supply voltage: 48-58DCV 5.7A max input (PSU not included)
Dimensions: 180 x 140 x 24.4mm
Weight: 686 grams
Managed PoE Switch with 8 RJ45 and 4 SFP slot
8 x 10/100 / 1000Mbit with PoE ++ (95Watt)
PoE power budget is 360Watt (45Watt per port)
PoE utvidga mode - max. 160 - 200meter
2 x 100 / 1000Mbit SFP slot - for Single- and Multimode SFP module
2 x 10Gbit SFP slot
2 x Digital input
2 x Digital outputs (Open Collector)
IGMP Snooping Seite 128 VLAN interfaces
IEEE 1588v2 Precision Time Protocol (time syncronising)
Operating temperature: -40 - + 75 ° C
Dimensions: 152 x 108 x 77 mm
Weight: 1, 2kg
Supply voltage: 48 - 56VDC (recommended min. 52VDC) 8amp
Managed 10/100/1000Mbit Robust Industrial Switch
Vibration Safe and dust proof
M12 5 Pin Coded connector
with automatic Bypass for next switch if failure
IEEE 1588v2 Precision Time Protocol (PTP)
PTP is time synchronization in infrastructure
Modbus TCP/IP to SCADA
SMTP / SNMP Trap - generates Email Alarm
IGMP and MLD Snooping for Multicast
VLAN Routing (Layer 3)
CyperSecurity Minimizes safety risk / attacks
Redundant Ring, Fast Recovery
Supply voltage: 9 - 48VDC Redundant Input
Dim: 245 x 140 x 25 mm
Operating temperature: -40 - +75°C
DIN bracket , wall bracket
Weight: 1kg
