

Adlink DIN-68S-01 Terminal Board with 68 Screw Terminals
Adlink DIN-68S-01
Terminal card
On-board connector
68-pin SCSI-II female
103 x 85 x 46.2 mm (W x L x H)
Support a 32-bit 3.3 V or 5 V PCI bus (LPCI-7200S)
32-CH TTL digital inputs and 32-CH TTL digital outputs
Up to 12 MB/s transfer rate
Bus mastering DMA for both digital inputs and outputs
On-board programmable timer pacer clock
Supports handshaking digital I/O transfer mode
Multiple programmable interrupt sources
Compact, low-profile PCI size PCB
DI32O32PCI-L (ADLINK LPCI-7200S) is a high-speed digital I/O card. It consists of 32 digital input channels, and 32 digital output channels.
High performance designs and the state-of-the-art technology make this card suitable for high speed data transfer and pattern generation applications.
DI32O32PCI-L performs high-speed data transfers using bus-mastering DMA via 32-bit PCI bus architecture. The maximum data transfer rates can be up to 12 MB per second. Several digital I/O transfer modes are supported, such as direct programmed I/O control, timer pacer control, external clock mode and handshaking mode.
It is very suitable for interfacing high-speed peripherals with your computer system. DI32O32PCI-L supports 3.3 V and 5 V PCI bus with low-profile PCI size. It occupies less space and thus is ideal for book-size computers.
Adlink DIN-68S-01
Terminal card
On-board connector
68-pin SCSI-II female
103 x 85 x 46.2 mm (W x L x H)
16 analog inputs via USB port, 10-100S / S
Resolution: 12 bit
Sample-speed: 10Hz per channel
1 Analog output +/- 5V
4 digital outputs TTL ( CMOS
4 digital inputs TTL / CMOS
Power supplied from the USB port
DAQ Software: Purchase NextView
4-Port 10/100 / 1000T 802.3at PCI Express
PoE + (120W)
Intel I350 Controller to 4 x RJ45
Dimensions: 169 x 121 x 18 mm | weight 251 g
Operating temperature: -10 ~ 60 C
8-CH timers/counters
2-CH cascaded 32-bit timer with 1 MHz base clock
On-board multiple base clocks ranging from 100 kHz to 2 MHz
External gate control and clock inputs for each counter
Inverted gate signals for 4-CH synchronized frequency measurement
Multiple interrupt sources from counter outputs, timer outputs and external interrupt inputs
Moxa NP21103
DB25(M) Termininal Block Kit for RS-422/485