Subcategories
Designed for Nayax payment terminals and CCI coffee machines
RS232 Male DB9 connector for interface with coffee machines.
Power(DC), ethernet(RJ45) and external reader(RJ11) ports.
Eliminates the need for CCI to MDB converters
16 RJ45 Ethernet ports
10/100/1000 Mbps with auto-adjusting MDI/MDI-X
DIN-rail and wall-mounting
Metal enclosure rated at IP30
Dual power input for redundancy
8K MAC address table
Working tempeture -40 to 75 C degrees
12 to 48VDC input
1x SIM 4G LTE
1x RJ45 PoE-PSE 802.3at
50-57VDC power input
Cellular & Config, NAT / Bridge Mode
OpenVPN, Packet Filter, MAC Filter, IPS
-30°C ~ 70°C operating tempeture
Optional: DIN-Rail, Wall-Mount, Power Adapter
24Vdc supply
Power 200 Watt PTC
-45 to 70℃
IP20 classification
40x47x114mm
DIN assembly 35mm
Max. 90% humidity
DELIVERED WITHOUT THERMOSTAT! Must be ordered alongside.
4 port PoE pass through - 10/100/1000Mbit
1 x RJ45 PoE in (data + PoE++) - 95 Watt
Mid-span and End-span
4 x RJ45 PoE out (data + PoE+) - 30 Watt
PoE out pin: +1/2, -3/6
PoE output power, total is max. 75 Watt
PoE input voltage 50 - 57VDC
Temperature: -40 - +75°C
Dimensions: 135 x 88 x 32 mm
Your bracket
PCI card with 96 TTL I/O channels and 3 counters
PCI interface
96-CH digital TTL/DTL inputs/outputs
Emulates 4/2/1 industry standard 8255 PPI (mode 0)
Direct interface with OPTO-22 compatible I/O modules
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
Adlink PCI-7296
LGA 1700
Aluminium
Noise Level: MAX. 53dBA
Air Volume: MAX. 47CFM
Two Ball Bearing
4 Heat Pipes
CPU hole distance: 78x78mm
Fan Speed: Max 8000 RPM
FAN size 60x60mm
Material: aluminium
TDP 180W
Can be used in 2U
17" TFT LED Touch screen Display
Screen resolution of 1280 x 1024
Brightness 400 cd/m²
Resistive touch
Intel Celeron Quad Core, 2.0 GHz
4GB DDR3L RAM, expandable to 8GB
VGA, HDMI
1 x LAN Intel 82583V 1000Mbps
3 x USB 2.0, 1 x USB 3.0
1 x COM port
IDEC switch Start/Select/Reset/Key/Stop switch (optional)
IP65 rated water and dust resistant
OS - supports: Windows 7/8/10, Linux, Unix, QNX
Optional: WiFi and Bluetooth
Robust construction
Operating temperatures from -10 to +60°C
External I/O switch
Dimensions: 400 x 390 x 155 mm
Supply voltage: 12-24VDC
Purchase extended supply voltage +9V-36V
15.5" TFT LED Touch screen Display
Screen resolution of 1920 x 1080
Brightness 600 cd/m²
Multi PCAP touch
Intel Core i3-8145U 2.1 GHz
4GB DDR4L RAM, expandable to 32GB
HDMI, DisplayPort
2 x LAN I211-AT GbE LAN
4 x USB 3.0
IDEC switch Start/Reset/Key/Stop switch (optional)
IP65-full: Water and dust resistant
OS - supports: Windows 7/8/10, Linux, Unix, QNX
Optional: WiFi and Bluetooth
Robust construction
Operating temperatures from -10 to +70°C
External I/O switch
Dimensions: 400 x 315 x 130 mm
Weight: 16kg
Supply voltage: 9-36VDC
Power consumption: <35W
either 128kb or 2mb buffer
DC 9v/200mA with 3mm DC plug
Baud rate from 50 to 115K
7 or 8 data bits, ODD EVEN or NONE parity
Compact and efficient power module for CAN bus systems
100A AC current measurement with 0-5V DC output for remote monitoring
Outputs 4 pin terminal
Power Input -12V / +12V
Operating Temperature -10° C to +80° C
Dimensions: 60 × 61 × 16 mm
Weight 150 g
Power Consumption 1 Watt
Detects door/window opening via magnetic contact separation
Purpose Detects opening of doors/windows in IT racks, cabinets, etc.
Compatibility Works with Vutlan monitoring systems and other alarms.
Operating Humidity 5 - 95%
Operating Temperature Range -10 - 50 °C
Connection x2 cables to 3.5mm power terminal connector.
720P resolution
Dome Camera
Compatible with USB 2.0 and 1.1 interfaces
Equipped with infrared (IR) capabilities for low-light environments
1.0 megapixel sensor for clear image capture
Cable length of 5 meters
12V DC sound and light alarm with 108 dB sound pressure and 3.8 kHz tone frequency
Input: Connects to 12V DC, 0.25A electronic relay
Cable Length: 1.5 m
Installation: Wall or ceiling mount
Functionality: Can be controlled manually or through logic in the device interface
Max Current Consumption: 250 mA
Operating Temperature: -50° C to +105° C
Operating Humidity: 5% to 95% (Non-Condensing)
Compact 12V LED strobe light with high visibility for security alarm systems
Cable Length 3m
Input 2-wire cable
Voltage 12V
Rated Current 120mA
Flashing Frequency 90/min
Power Consumption 1 Watt
Operating Temperature -50° C to +105° C
Operating Humidity 5% to 95% (Non-Condensing)
Dimensions Height 73.5mm, Diameter 45.5mm
Weight 110g
Compact relay switch for HVAC control
Function Switchable contact for equipment control
Applications Air conditioners, magnetic locks, bolt locks, sirens, heaters, etc.
Compatibility Connects to units with 12V outputs
Input Wire terminal 3.81mm 2P
Output Wire terminal 5.0mm 2P
Operating Temperature -50° C to +105° C
Operating Humidity 5% to 95% (Non-Condensing)
Mounting Includes bracket, sticker, and screws
Power Consumption 12 mW
Max Switching Voltage 250VAC / 30VDC
Max Switching Current 5A
Max Switching Power 1250VA / 150W
Weight 60 g
Dimensions 60×18×18 mm
Compact environmental monitoring for IT rooms with the possibility of sensor expansion
CPU speed/RAM/OS 600MHz, 128Mb, Linux v.6.2
USB port For cameras, flash drives, hubs
Analog ports 4 (can be extended)
CAN port 1 (max. 10 sensors and extensions)
Dry Contact inputs 2 digital inputs
Relays 2 outputs (12V, 0.25A each)
Ethernet 10/100 Mbps
Robust monitoring solution for IT environments with extensive sensor support
Analog Ports: 4 (extendable)
CAN Port: 1 (max. 10 sensors & extensions)
Dry Contact Inputs: 2 digital inputs
Relays: 2 outputs (12V, 0.25A each)
Ethernet: 10/100Mbps
USB Port: For cameras, flash drives, hubs
Dimensions 190 x 33 x 91mm
Designed for DIN rail installations, this monitoring controller offers comprehensive sensor integration
Built-in LTE modem is sold separately and can be purchased separately
Analog ports 6
Digital inputs: 4
Digital outputs: 2 isolated, max. 24VDC, 15mA
Relay outputs: 2 electromagnetic, 12VDC, 0.25A
Built-in sensors temperature (±1°C accuracy), voltage (1% accuracy)
Modbus RTU Supports up to 32 devices
Operating temperature: 0 to 70°C
Dimensions: 160 x 90 x 58 mm
Power supply: DC 12V
High precision DC power conversion device with extended range compatibility
Compact and efficient DC current monitoring solution
Inputs RJ-12 / RJ-11
Operating temperature -10°C to +80°C
Power input 12V DC, 1A
Power consumption 100 mW
Dimensions 68 × 47 × 26 mm
Weight 160 g
Compact and efficient AC current monitoring solution
Inputs RJ-12 / RJ-11
Operating temperature -10°C to +80°C
Power input 12V DC, 1A
Power consumption 100 mW
Dimensions 68 × 47 × 26 mm
Weight 160 g
Compact unit to increase analog sensor capacity for monitoring systems
Add up to 8 sensors per unit
Ports x8 RJ11 6P4C, x2 CAN bus
Power 12V DC, 0,5A
Operating temperature Min. -10° C - Max.+80° C
Dimensions 129 x 28,6 x 56 mm
Expands sensor capacity for enhanced monitoring
Connects up to 8 analog sensors
Ports x8 RJ11 6P4C, x2 CAN bus
Power 12V DC, 0.5A
Operating temperature -10° C to +80° C
Dimensions 107 x 90 x 65mm
Weight 130g
Compact and efficient DC voltage monitor for systems up to 15V
Voltage Measurement 0-15V
Operating Temperature -10° C to +80° C
Output 4 pin terminal
Weight 100 g
Power Consumption 100 mW
Dimensions 60×18×18 mm
Mounting: Desktop, Wall mount
Package Contents DC voltage monitor, 3m shielded cable (6P6C RJ12), TBW 5-2P
Compact and efficient DC voltage monitor for systems up to 75V
Voltage Measurement 0-75V
Operating Temperature -10° C to +80° C
Output 4 pin terminal
Weight 100 g
Power Consumption 100 mW
Dimensions 60×18×18 mm
Mounting: Desktop, Wall mount
Package Contents DC voltage monitor, 3m shielded cable (6P6C RJ12), TBW 5-2P
Compact converter for current measurement and data conversion for IP monitoring systems
Input Terminal Plug 2pins 5mm
Output Terminals RJ11 / RJ12
Power Consumption 100 mW
Dimensions 60×18×18 Mm
Weight 60 g
Compact and efficient rack monitoring solution with essential environmental sensors
Type CAN digital sensor
Power Supply Over CAN bus
Humidity Accuracy ±3%
Temperature Range -10 to +85 °С
Temperature Accuracy ±1 °С
Optimal Temperature Range: -10° C to +80° C
IR Sensor Distance 1-4 cm
Weight 270 g
Dimensions 89 x 27.1 x 48.2 mm
Inputs x2 dry contacts, x2 RJ-12 ports
Package Includes Unit, mounting bracket, screws
Compact digital unit for expanding dry contact capacity
Adds x32 dry contact inputs
Input Terminals 32 dry contacts
Daisy Chain Support
Operating Humidity 0 to 95%
Storage Conditions -40° С to +100° C, 0 to 95% humidity
Operating Temperature -10° C to +80° C
Dimensions 215 x 40 x 40 mm
Mounting Options 19" rack, desktop, wall mount
Power Consumption 1 Watt
Package Includes Dry contacts unit, cable, rubber foot, terminal, screws, rack brackets
Compact and efficient sensor for accurate pressure, humidity, and temperature readings
Sensor Type CAN digital
Pressure RMS Noise 0.2Pa (1.7cm equivalent)
Pressure Error ±0.25% (1m at 400m height change)
Pressure from °C: ±1.5Pa/K (±12.6cm at 1°C change)
RH Accuracy ±3% RH (max)
Hysteresis ≤2% RH
Temperature Accuracy ±1.5°C
Pressure Range 300 to 1100 hPa
Operating Temperature -40 to +85 °С
Power 12V DC 1A, 1 Watt
Dimensions 68x47x26 mm
Weight 160 g
Mounting Options Desktop, Wall mount
Compact and efficient sensor for smoke, humidity, and temperature monitoring
Sensor Type CAN digital
Inputs 2 x RJ-12
Operating Temperature -10° C to +80° C
Operating Humidity 5% - 95% (Non-Condensing)
Power Consumption 100 mW
Daisy chain capability
Dimensions Ø100×45 mm
Weight 290 g
Mounting Ceiling
Compact and efficient sensor for humidity and temperature measurement
Sensor Type CAN digital
Temperature Accuracy ±0.4 °C (max)
Humidity Accuracy ±3% RH (max)
Temperature Range -40 to +100 °С
Humidity Range 0 to 95% RH
Power 12V DC, 1A, 1 Watt
Max Distance 225m
Dimensions 68x47x26 mm
Weight 160 g
Mounting Desktop, Wall mount
Compact indoor temperature analog sensor
Connects to Vutlan monitoring devices
Temperature Range: -10° C to +80° C
Accuracy: ±0.15 °C at room temperature
Cable Length: 3m
Connection: RJ-11 / 6P4C
Dimensions: 60×18×18 mm
Weight: 70 g
Power Consumption: 60 mW
Package Includes: Sensor, cable, screw, sticker
Compact outdoor/indoor temperature sensor
Analog Sensor
Temperature Range: -40° C to +105° C
Cable Length: 15 m
Power Consumption: 60 mW
Accuracy: ±3 °C
Connection: RJ-11 6P4C
Package Contents: Sensor, sticky clamps
Dimensions: 7×30 mm
Weight: 340 g
Accurate humidity measurement
3% relative accuracy
Ideal for indoor environments
Dimensions 60×18×18 mm
Power Consumption 60 mW
Operating temperature Min. -10° C - Max. +80° C
Input terminals RJ-12 / RJ-11
Analog sensor
Voltage range 0-240 V AC
Operating temperature -10°C to +80°C
Dimensions 63×40×67 mm
Weight 125 g
Power consumption 60 mW
RJ11 to USB cable included in 1.8 meters
Measures 0-246V, AC
High accuracy of 1%
Compatible with various monitoring systems
Easy DIN rail 35mm mounting
Power consumption 60 mW
Dimensions 90.2 x 36.3 x 57.7 mm
Operating temperature Min. -10°C +80°C
Monitors door/window status
Indicates open or closed state
Dimensions 600x18x18 mm
Includes brackets for mounting
Weight 106 g
Input RJ9 (4p4c)
Output RJ11 / RJ12 (6p4c)
Operating temperature Min. -10° C, Max.80° C
Strømforbrug 60 mW
Detects vibrations
Ideal for walls, windows
Max. distance from unit: 150 meters
Dimensions 60×18×18 mm
Power consumption 60 MW
Measures air volume
Airflow 0 - 3 m/s
Suitable for ACs, fans
Max. distance from unit: 50 meters
Dimensions 600×18x18 mm
Weight 106 g
Analog indoor smoke alarm
Supports Daisy Chain
React to indoor smoke
Operating temperature: 10 to +55°C
Dimensions Ø100×45 mm
Weight 150 G
Power consumption 100 mW
Infrared PIR motion control
Wide angle 110° field of view
12m detection range
RJ-11 connector
Operating temperature -10° C to +80° C
Compatible with VTL100036 / Sensor Extension Unit
Sensitive to moisture and liquid contact
Flexible, easy-to-install detection cable
Detects a variety of conductive liquids
Leak detection for conductive liquids
Level monitoring in containers, pits, cellars
Two stainless steel rods
Encased in plastic
Suitable for plumbing, trays, raised floors
Can be used near toilets, basements, washing machines, water heaters
Two RJ connectors for system integration
Dimensions 60×18×18 mm
Operating temperature -10 °C to +80 °C
Load control with on/off and restart options for up to 4 outlets
Built-in temperature sensor
Supports connection of 2 additional sensors and 2 dry contacts
Integration with two 12V devices, such as alarm beacons
Compatibility with USB camera
Option for built-in LTE modem
Dimensions (L x W x H) in mm: 440x44x80
4G LTE connectivity
SMS messaging capability
Ethernet reservation over 4G LTE
Power-cycling feature
Includes two LTE antennas
Dimensions (L x W x H) in mm: 440x44x80
Dual-band 900MHz and 5.8GHz design
Omnidirectional beam pattern
5 meters cable length
Enhances LTE modem connectivity
Robust and reliable performance
Dual-band LTE antenna
Frequency range: 890-960 / 1710-1890 / 1920-2170 MHz
Gain: 7 dBi
Vertical polarization
Durable design with magnetic mounting
Operating temperature: -10° C to +80° C
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to function
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 mm
Reacts to moisture and contact with water
Suitable for clean, contaminated and distilled water
Reacts to various liquids, including acids, bases and alcohols
Can be used in high humidity and polluted environments
Maximum distance from device: 225 meters
Can be purchased in several lengths
Requires VTL100058 sensor to work
Analog plug-and-play sensor, easy to integrate and reset
Diameter: 5.5 Mm
Specially designed for DIN-rail mounting racks
Includes 6 analog sensors, CAN sensor bus
Ethernet port, RS-485 / Modbus RTU
4 digital inputs, 2 12V DC 0.25A relays, 2 digital outputs
Supports a wide range of sensors and devices
Door switch for access control - EXIT button.
End contact by pressure
Contact: NO/NC/COM
Max. 36VDC 3Amp
Cast aluminum body, steel button
12VDC LED supply
Operating temperature: -20 - +50°C
Dimensions: 80 x 30 x 24 mm
GSM/LTE alarm - 4G - Global version
Supports all LTE frequencies
Configuration via USB (Windows program) or SMS
2 x digital inputs with "dry contact" or "logic level" mode
2 x analogue input from 0 to 60VDC, 10 bits
2 x relay output with NO/NC contacts
1-Wire interface for 4 Teracom temperature and humidity sensors
Input can be navigated with alarm text etc.
SMS alarm - up to 5 numbers
Email alarm - up to 5 email recipients, SMTP with TLS support
1 relay can be activated with calls from up to 100 phone numbers
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
MQTT 3.1.1 support
Firmware update "on air"
Supply voltage: 8 - 32VDC, 2Watt - purchase PSU
Dimensions: 109 x 65 x 32 mm
Weight: 152g
Global 4G LTE Controller, logger and alarm
Supports all LTE frequencies
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C
19" TFT-LCD Panel PC
IP65 front
Resolution: 1280*1024
250 nits
5-wire resistive touch screen (capacitive touch on request)
Intel Celeron J4125/J6412 CPU / Core i5 /i7
RAM: 1x SO-DIMM DDR4 (celeron) max 16 GB, i5/i7 2x SO-DIMM DDR4 max 32 GB
1 x M.2 2242/2260/2280 SATA
1 x SATA (2.5'' SATA)
1 x M.2 2280 NVME
MPCIe: M.2 3042/3052 for 3G/4G/5G with built-in SIM slot, M.2 2230 WiFi & BT
2x RJ45 Intel i225V (on special request 2 more can be added)
USB: Celeron version: 4*USB2.0+2*USB3.0 (J4125/J6412), i5/i7 version 4*USB3.0+2*USB2.0
COM: 2x DB RS-232/422/485 port, 4*RS232 in expansion port
GPIO: 1* 10 bit GPIO Inside the expansion port
Power supply: 9-36V DC plug
Working temperature: With air flow -10 ~ 60° C
Anti-vibration with SSD: 3 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 hour/axis
Anti-shock with SSD: 30 G, IEC 60068-2-27, half sine, 11 ms duration
437.27x361.27x68.8mm
OS Support: Windows 10 / Ubuntu, CentOS
Function LTE-based WAN expansion for various IP networks
Applications Enterprise, surveillance, WiFi hotspots
Dual SIM For ISP fail-over
Web-UI Basic settings, CLI and Command Script for advanced settings
Ethernet Ports 1 configurable WAN & 2x Fast Ethernet
Includes WiFi support
Micro-SD Slot for log storage
Power Input DC 5-18V
Operating Temperature -30°C ~ 70°C
Weight 220g
Dimensions 93x90x27mm
Mounting: Desktop or Wall Mount
Construction: Heavy Duty Cold Rolled Steel
Color: Black (Standard), or special colour on requist
Support Micro ATX M/B (120ATXR) (Max. to 9.6" x 9.6")
Drive Capacity: 2x 5.25" CD-ROM & 2x 3.5" FDD &1x 3.5" HDD
Power Supply (Optional): PS/2 Size Single or Mini Redundant ATX P/S (Rear Installation) Max. Depth 190mm
Cooling: 1x (120mm = 90.0CFM ea.) Fan
Front Door: Single Door With 2 Thumbscrews
Air Filter: Inside Front Danel (Washable)
Connector Port (Front): 2x USB Ports (on special request)
Thermal Management Card
Indicators: LEDs for Power ON/OFF, HDD Active, Fan, Temperature
Flexible Hold Down Bar Designed
Switch: Power ON/OFF, System Reset, Buzzer Reset
Dimensions (W x H x D): 400 x 177 x 420mm (15.7" x 7.0" x 16.5")
GW: 15.0 kgs / 33.1lbs
Humidity:55% - 95% Non-condensing
Power supply,DVD, Floppy is not included.
Key for USB-B port lock - green
Lock is inserted with this green special key
Other color key cannot release the lock
Key is USBB-LOCK-GN
1 piece. in bag
Colour: green
Material: plastic
High Speed Access Point - Dual Band
AP, Repeater, Bridge, Bridge to several
Up to 64 simultaneous users
2.4GHz, 5GHz
Transmission: aggregated up to 1200 Mbps
Transmit power: 500mW - adjustable
2 x 5dBi antennas - removable with good range
Ports: 1 x 10/100Mbps RJ45 WAN port
IP67 tight
Powered via passive PoE or supplied 24VDC adapter
Power consumption: less than 12 Watts
Dimensions: 380 x Ø54 mm
Temperature: -40 - +55°C
Compact 5 port Ethernet switch for 100Mbps
Not Managed
Very economical: max. 2 Watt
Supply voltage: 12 - 48VDC
Can also be powered with 24VDC
With redundant voltage input
Dimensions: 104 x 70 x 30 mm
Weight: 255 grams
IP30, metal housing
DIN bracket
RJ45 connector with pass-through
For 23AWG Ethernet cable
Fanless design ( Embedded heat pipes cooling solution )
12th/13th Gen CoreTM i9/i7/i5/i3 Processor (Alder Lake-S/Raptor Lake-S)
Up to 60W GPU MXM module expansion
802.3af (15.4W)/802.3at(25.5W) Gigabit PoE ports
DP x2 + HDMI x 1 and DVI x 1 (support 4 independent displays)
Power on/off delay control / configurable ignition power control
Supports TPM 2.0 and Time-Sensitive Networking (TSN)
Two-mPCIe for optional WiFi/3G/4G/GPS or I/O expansion supported
Front-accessible I/O
1 x M.2 B for storge or 5G / LTE +1 x M.2 E-Key for WiFi / BT
1 x M.2 M for NVMe SSD
285x230x 90mm (9.84” x11.50” x 3.54”),Fanless 285x230x110mm (9.84” x11.50” x 4.33”),w/ FAN
DC 9~36V input
CE, FCC Class A, E mark
Duplicate one DVI-DL+ Audio input to multiple DVI-DL+Audio outputs
Support up to 2560 x 1600 resolution
Automatic power-saving when DVI input is lost
EDID Copy function ensures accurate output display
Read and store the EDID from the connecting display to the video extension system
Compatible with most of the popular screen resolution to XGA, SXGA, UXGA, WSXGA ….Full HD, WUXGA system.
Simple LED indicatior makes operation userfriendly
Plug-n-Play system configuration
Alternatively perform the default or the copied EDID for the connected display device
Unique DVI-SL / DVI-DL Switch for accurate EDID configuration
Steel whip antenna for Access Point
Magnetic foot
Dual Band 2.5GHz / 5.8GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
RP-SMA male / RSMA male connector
Dimensions: 150 mm, Ø30 mm foot
4 ch Network extender over 2-wire, RJ45 or Coax cable
Provides transparent Ethernet connection up to 2000 meters
Range with up to 46Mbps: max. 1200 meters COAX
Range with up to 28Mbps: max. 1000 meters RJ11
Range with up to 73Mbps: max. 699 meters RJ45 UTP
Range depends on cable quality etc.
4 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
1 x BNC Coax 75ohm
DIP switch to select Master or Slave mode
Dimensions: 155 x 86 x 26 mm
Cabinet: Metal
Weight: 347g
Supply voltage: 12VDC/1A
Temperature: 0 - +50°C
Protocol converter from M-BUS devices to PC/PLC which is Modbus Master
Up to 20 M-BUS units (meters)
RS485 Modbus interface for Modbus master
Free setup software
Supply voltage: 18 - 35VDC, 15 - 21VAC
Max. power consumption: 4 Watt
Baud rate: 1200 - 115,200 baud
Galvanic isolation
Temperature: -40 - +70°C
Dimensions: 71 x 60 x 60 mm
Break the 100 meter limit with VDSL over RG59 coax cable
1 x RJ45 10/100 Mbit
Up to 94 Mbit/s - duplex (automatic speed optimization)
Transparent (untouched) data connection
128-bit AES encryption
Frequencies: 2 - 28MHz
Same device can be Master or Slave (DIP)
Establishes even the best connection
Dimensions: 97 x 70 x 26 mm
Temperature: 0-50°C
5VDC 2A power supply included
75Ω cable must be used
Use 2 pcs. ETH-VDSL-RG for a point to point connection
Use 1 pc. Master for 4 pcs. Slaves - 1:4
10.1" Robust in Vehicle tablet
Qualcomm Cortex-A53, 64-bit Octa-core, 1.8GHz
Android 9.0
2 GB LPDDR3 RAM (4GB can be purchased)
16 GB eMMC (64GB can be purchased)
Bluetooth 4,2 WLAN IEEE 802.11a/b/g/n/a & 4G LTE, HSPA+
USB Type-C & USB Type-A
RS232 ×2, RS485 ×1, CANBUS CAN 2.0b ×2, GPIO, RJ45
IP6x & IPx7
Operating temperatures -20°C ~ 65°C (-4℉~149℉)
Power DC8-36V
Dimensions 273×183×49mm
Weight 1,6kg
Steel whip antenna for LTE, GSM
Magnetic foot
Wide Band 2 - 6 GHz
With shortening coils
9dBi Gain, 50 ohms
3 meter cable
SMA he
Dimensions: 150 mm, Ø30 mm foot
i7 Haswell i7 4578U 3.0GHz, Dual Core, 4 Threads 4MB Cache
2 x SO-DIMM DDR3L, Max. 16GB
TPD 28W
Intel Irus Graphics 5100
2 x Intel Gbit RJ45, Wake on Lan, PXE
6 x RS232/422/485 (2 is BIOS select RS422/485)
8 x USB (4xUSB3.0, 4x USB2.0)
SIM card slot
GPIO
HDMI, VGA (dual display support)
1x MSATA3.0, 1x mini PCIe
-20 ~ +75 Centigrade (requires special RAM)
OS Support: windows 7, 8, Windows 10, Linux
212,5x149,5x52mm
12Vdc
Mains cable with "device plug"
Male C14 for live equipment (IEC)
Female C13 for voltage receiving equipment (IEC)
250 VAC with ground
Approvals: CE, WEEE
Good quality
Contact the sales department for other lengths
19” rackskab, 4U højt, 45cm dybt, til vægmontage
19” rackskab, 6U højt, 60cm dybt, til vægmontage
Outdoor 19" rack cabinet of 6U
Comes with installed fans in the top
Maxium load capacity 100kg
IP55 sealed
Weight is 50kg
Depth of 60cm
21.5", FULL HD 1920 x 1080 16.7m Colors
Brightness 250nits (Possibility: 1000nits)
IP69K
VGA, (Possibility HDMI)
USB for toutch screen control
PCAP Projected capacitive multitouch screen, touch with flat design
A true flat, easy to clean front surface with edgetoedge design
Full IP69K waterproof enclosure
SUS 316/ AISI 316 stainless steel for food and chemical industries
Waterproof sealed conduit pipe for cable protection
Support VESA / YOKE mount
Optical bonding (Possibility)
Operation temperature 0°C to 45°C
541 x 337 x 56.2 mm
12V DC
1.91 GHz Intel Atom E3845 CPU
Wall mount/VESA mount
1x 204-Pin SO-DIMM DDR3L-1066/1333Mhz, MAX. 8GB
2 x RS232/422/485 (M12)
2 x USB 2.0 (M12)
2 x 10/100/1000 Mbps Ethernet Intel i210-IT (M12)
1 x VGA
1 x 2.5” HDD drive bay (max. up 9.5 mm height)
1 x mSATA (enabled in BIOS setting)
1 x CFast™
-30°C to +60°C
210 x 366.83 x 83 mm (8.27” x 14.44” x 3.27")
9 to 36 VDC power input (M12)
OS Support: Win 10 IoT, WE8S, WES7, Linux
Input SDI signal via BNC female
Output USB3.0/BNC female/HDMI
Max video reolution 1920x1080 (1080p)
60FPS Frames per second max
Audio port 3.5mm
Working Temp. -20℃-65℃
OBS Player support
Windows/Linux /Android/MAC
26" DNVGL-CG-0339, IACS-E10, IEC60945 4th marine monitor
350 nits
PCAP touch
Fanless
IP66 on the front
Resolution: 1920 x 1200 - 16:10 format
Active display area: 550 x 344 mm
1 x VGA
1 x HDMI 1.4
1 x DVI-D
Power supply: Terminal block 24VDC
DC input: 9 - 36VDC / 55W typical
Mounting: Panel (Flush) mount with IP66*, VESA100, Bracket mounting
Vibration: 0.7g@DNVGL CG-0339 (Class A)
Shock: 15G, 11ms duration
Optional: Remote control via RS232 D-SUB 9P
DIM: Day Mode, Dusk Mode, Night Mode
Dimensions: 621 x 433 x 86 mm
Cut out dimensions: 596 x 406 mm
Weight: 12.8 kg
2x 10Gbit Ethernet RJ45
Max. Data transfer 20000Mbit/s
Net standard IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x
Vollduplex 10,100,1000,10000 Mbit/s
Full Duplex support
Chipset BCM57810S
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Superior small packet performance
SR-IOV
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)
C19 mains plug up to 16A
For 3-wire mains cable
Used for UPSs and PDUs
IEC C14 male plug - appliance plug
Mains plug for cable mounting
C15 IEC mains female plug
Device plug with slot
Plug for cable mounting
4K 60HZ up to 60m (HDMI 2.0)
4K 30HZ up to 120m (HDMI 1.4)
HDMI2.0/HDCP2.2
Point-to-Point
CAT6 cable recommended (at least CAT5e required)
IR transmition
5VDC Transmiter and Receiver
21.5" TFT 1920x1080
standard 250Nits (on special request 100 or 1500 nits)
PCAB Multi Touch Screen, Support touch with glove/ Rain mode
Intel Core i5-1135G7 2.4GHz (up to 4.2GHz) Gen 11.
1 x SO-DIMM DDR4 3200MHz, MAX.32GB
M12 waterproff connectors
2 x Rj45 Intel Ethernet
1 x M.2 2280 NVMe SSD
1 x RS232
1x SATAIII
TPM 2.0
IP67K
VESA: 200x100 M4
Addons: "Optical Bonding", YOKE mount
541x337x56.2mm
10Kg
Stainless Housing SUS 316/ AISI 316
10% to 90% RH, NonCondensing
Working Temperature 0°C to 45°C
12Vdc (M12 Type)
CE, FCC
600 Mbps Dual band WiFi network card
USB
External antenna
Supports 2.4 GHz and 5 GHz
Windows Vista/XP/2000/7/8/10, for Linux, for MAC OS10.5-10.13
Video Input: S-video input and RCA composite video
Output: USB Type-C
Video system support: NTSC, PAL and SECAM
Dimensions: 7.3cm x 2.5cm x 1.5cm
Power input via USB 5VDC
1 meter RS232 cable with DB9 female connector
With thumb screw
Pigtail cable which is terminated to a screw terminal
RX-TX-GND
Screen Size 15,6"
Resolution 1920x1080
Panel Brightness 1000nits
PCAP touch via USB
1 x VGA
1 x HDMI (Optional)
1 x DVI (Optional)
12V DC input
Operating Temperature -10°C to 60°C
Optical bonding (Optional)
Screen Size 18.5 inches
Resolution 1920x1080
Panel Brightness 1000nits
PCAP touch via USB
1 x VGA
1 x HDMI
12V DC input
Operating Temperature 0°C to 50°C
Resistive Touch Screen (Optional)
Protection Glass w/o Touch Function (Optional)
Optical bonding (Optional)
MAX. total 65 Watt
GaN technology
110-240Vac
2 x USB-C
2 x USB-A AC (QuickCharge)
max current capacity
3 A max. performance 65 W
Output:
USB-C™ PD1 (single) max. 65.0W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 3.0 A (27.0 W) DC
12.0 V max. 3.0 A (36.0 W) DC
15.0 V max. 3.0 A (45.0 W) DC
20.0 V max. 3.25A (65.0 W) DC
USB-C™ PD2 (single) max. 18.0 W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 2.0 A (18.0 W) DC
12.0 V max. 1.5 A (18.0 W) DC
USB-A QC1 max. 18.0 W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 2.0 A (18.0 W) DC
12.0 V max. 1.5 A (18.0 W) DC
USB-A QC2 max. 18.0 W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 2.0 A (18.0 W) DC
12.0 V max. 1.5 A (18.0 W) DC
Dimension 87.2 (L)x 91 (W)x 19.5 (H)mm
Weight 154 g
EU standard frequency band network FDD-LTE/UMTS
SMS--Send/Receive/Delete
Wi-Fi 2.4Ghz 802.11g
Up to 10 users have access to WiFi
Nano SIM
5VDC 1A
Up to 150 Mbps MAX download speed
88mm x 28mm x 12.3mm / 25g
2 Meter
USB-C to USB-C
With PD (Power Delivery)
Up To 480GBs
Outdoor robust Dual Band Access Point etc.
AP, Gateway, Repeater, Wi-Fi Mesh
2.4GHz and 5GHz, 600/2400Mbit (3000Mbit)
Up to 256 clients Wi-Fi 6
1 x RJ45 Gigabit port PoE+
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 cast aluminum housing for mast mounting
Operating temperature: -40 - +70°C
Real-time Wifi channel analyzer
Dimensions: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: PoE, 48V/0.5A (PoE+)
Patch cable CAT.6A RJ45 S/FTP 500 MHz
For Gigabit Ethernet & 10 Gigabit Ethernet & PoE
Overall screen and pairs in metal foil (PiMF)
AWG 26/7 100% copper wire
LSZH (halogen-free and flame-retardant), IEC60332-1-2
ISO / IEC 11801, EN50173 & TIA / EIA-568
120W USB Charging Station
GaN Charger Charging Hub 5
PD 3.0, QC 3.0, AFC, FCP, SCP, PPS fast charging protocol
Max. output on port 100watt
Apple 20W PD and Samsung PPS45W fast Charging
Load Charing: 1 port charging on USB-C 100watt, If 2 Port Charging on USB-C 65W and 45W, If 3 port USB-C 65W,30W,20W
Load Charing USB-A: 1 port charingin on USB-A 18, 2 port 12W
If all 5 ports in use: 65W, 30W, 20W, 10W(USB-A), 10W(USB-A)
230Vac supply
