Subcategories
Active filters
RFID TAG Mifare and Mifare Classic ISO14443A, 1 KB 16 Sectors Memory. 13.56MHz, Unique UID, Keychain
Mifare Classic1K TAG
designed as key ring
Bag with 20 pieces.
reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 Blocks / 16 byte
UID code is factory programmed - cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
Dim: 40 x 32 x 4 mm
Restlager: Læser ISO spor 1 (alfanumeriske data, f.eks. sygesikringskort) og spor 2
Tilsluttes RS232 (serieporten)
RFID Reader 125kHz EM Round, 40bit HEX, RS232, code is sent to the COM Port Register. 9 - 12VDC.
RFID 125kHz reader with RS232
EM 4xxx Standard Tag (40 bit HEX)
Mounting in Ø 31 mm Hole
Length from Resess: 27 mm
Resess Width: 40 mm
RS232 , 9600, N, 8, 1
9 - 12VDC / 50mA
Temperature: -10 - + 70 ° C
Material: PBC
IP54 from front
RFID 2.45GHz Active TAG for pendant, range up to 90 m. SOS button, signal or power on / off
Active 2.45GHz RFID TAG
2.45GHz read/write
Range up to 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
Wireless programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
Built-in SOS button
RFID 2.45GHz Active Tag Read / Write with Keychain Pendant
Active RFID Take with key ring pendant
2.45GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless TAG programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified
Restlager: Programerbar magnetkortlæser
Kan indsætte diverse formateringstegn, f.eks. linjeskift.
Programmerbar magnetkortlæser med PS/2 interface. Lysdioder sikrer optisk kvittering, akustisk lydsignal ved korrekt aflæsning af magnetkort.
Restlager: 3 spors magnetkortlæser, PS2, OEM
Opsætnings softwaren virker kun på en Windows XP pc der har en PS2 keyboard port
Accessory: Full MDB cable for PAY2 and Onyx Payment Terminal
MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232
Batteri til BARCCD-RF-USB
Genopladeligt Li-ion batteri, 3,7V, 1620mAh
Cash drawer trigger via USB
Trigger to open cash drawers with Epson, Citizen or Star interface
Wireless 1D, 2D barcode reader, 2.4GHz, USB
1D, 2D barcode reader
Wireless 2.4GHz (RF dongle) or USB-A for USB-B cable
Reading distance: 10-500mm
Operating time: Approx. 16 hours
Recharge time: Approx. 6.5 hours via USB-B
Memory: 512K (over 5000 barcodes)
Dimensions: 150mm (L) x 70mm (W) x 95mm (H)
MDB for RS232 Converter for payment terminal, connect PAY terminal to the PC's COM port. 24VDC.
MDB Cable with RS232 Converter
for integrating Pay Terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm
RFID tag with hole for pendant, button for emergency, signal or on / off, ink. vibration sensor
Active RFID Tag with hole for pendant + vibration sensor
2.45 GHz read and write
Transmission distance 90 m
Dimensions: 42W x 30H x 10D (mm)
weight: 9.1g
wireless programming
Digital RSSI/LQI Data
low battery warning
Supplied without 1 x 2032 battery
Built-in button
FCC, CE Certified
RFID 2.45GHz Active TAG with keychain, vibration sensor
Active RFID Tag with key ring and vibration sensor
2.45 GHz read and write
Dimensions: 42W x 30H x 10D (mm)
weight: 8g
Wireless tag programming
Digital RSSI/LQI Data
Low battery warning
Supplied without 1 x 2032 battery
FCC, CE Certified
Bonprinter papir. Penbox 112 x 20ml. Kasse med 10 ruller
Paper- Printer Accessories - Thermal
2D / QR / 1D CCD Barcode scanner for finger, 3mil, Bluetooth, USB and transfer to Mobile or PDA
1D and 2D bar code reader with index finger strap
Up to 30 meters with 2.4 GHz
Bluetooth, 2.4 GHz
USB with FLASH memory
Up to 100,000 codes
Built-in Li-ion battery is charged via USB plug
Compatible with iOS, Android and up to Windows10
Right-handed or left-handed operation
1D barcodes
2D / QR codes
Restlager: Farvebånd 200 kort
Farvebånd til 200 kort (til PRINT-ID/PRINT-ID-MAG)
Evolis R3011 color ribbon
MDB for USB Converter for payment terminal, connect the Pay terminal to the PC USB port. 24VDC.
MDB Cable with USB Converter
USB-COM Port FT232RL
for integrating PAY terminal into a PC system
Demo software included
Power supply: 24VDC / VAC @ 0.5A (not included)
Dimensions: 100 x 50 x 30 mm
RFID Duplicator, 125kHz / Mifare/NFC reads / writes with USB interface. Can clone UID to t5577 RW RFID TAG
RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)
RFID reader 125kHz EM400x, waterproof, 8 characters Decimal, USB Powered from USB. With fixed cable outlet at the back.
Keyboard emulation: 8 decimal places (HID)
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - +75°C
Humidity during operation: waterproof
Reading range: 5 ~ 15 cm
Cable length: 164 cm
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
wall mounting, water resistant
Dual head magnetic stripe reader
Kan læse kort hvor magnetstriben vendes mod eller væk fra brugeren
RFID reader 125kHz EM400x, indoor - DECIMAL 10 digits, HID - keyboard emulation. Powered from USB. Desktop
Keyboard emulation: 10 digits, 40bit ASCII Decimal
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model
RFID 2.45GHz Active TAG card, read / write, range up to 140 m
Active 2.45GHz RFID TAG card
2.45GHz read and write
Transmission distance 140m
programmable parameter
Supplied without 2 x 3V CR2032 battery
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
wireless TAG programming
Wireless 1D bar code reader with memory for 400 scanning, USB wireless dongle. Up to 30 meters
1D wireless barcode scanner with USB RF dongle
wireless row side is typically 30 meters
built-in memory for approx. 400 scans
Supports all common 1D barcodes
Radio Technology: Zigbee
Card readers 3 tracks to RS232
reads ISO tracks 1, 2 and 3
RS232 interface
RFID reader 13,56MHz Mifare, indoor - DECIMAL 10 digits, HID - keybord emulation. Powered by USB. Desktop
Keyboard emulation: 10 digits, 40bit ASCII, Decimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating Temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model
RFID MIFARE Reader 13.56MHz, Indoor - Decimal 8 digits, 32bit, HID - Keybord Emulation. Powered from USB. Desktop.
Keyboard emulation: 8 digits, 32-bit ASCII, Decimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating Temperature: -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable length: solved USB cable
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Desktop - desktop model
RFID reader 13,56MHz Mifare, Waterproof - DECIMAL 8 digits, 32bit, HID - keybord emulation. Powered by the USB.
Keyboard emulation: 8 digits, 32bit ASCII, Decimal
Frequency: 13.56MHz Mifare Ultra Light
Versions: Mifare S50, S70, ISO15693, ISO14443A/B
Power supply: 5VDC from USB port
Operating temperature: -10 - +75°C
Reading distance: 5 ~ 15 cm
Cable: Mount the USB cable on the back
Dimension: 118 (L) x 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof IP67, wall mounting
RFID reader 13,56MHz Mifare, Waterproof - HEX 10 digits, 40bit, HID - keybord emulation. Powered by USB. outdoor model
Keyboard emulation: 10 digits, 40bit Hexadecimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable on the far side
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67
RFID reader 125kHz EM Waterproof - DEC 8 digits, 32bit, HID - keybord emul. Pwr by the USB. outdoor model - Epoxy filled
Keyboard emulation: 8 digits, 32bit Decimal
Frequency: 125kHz EM4xxx
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable from bottum - epoxy filled
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67
RFID Reader Mifare 13,56MHz, indoor - Hex 10 digits, HID - Keybord Emulation. Powered from USB. Desktop.
Keyboard Emulation: 10 digits, 40bit HEX
Frequency: 13.56MHz Mifare Ultra Light
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
Reading distance: 5 ~ 15 cm
Cable length: Solved USB cable
Dimension: 118 (L) x 75 (w) x 17 (h) mm
Weight: 250g ± 10%
desktop - table model
Dual Band 2.45GHz Active RFID TAG card also with 13.56MHz Mifare, read and write
Dual band RFID TAG card
2.45GHz and 13.56MHz Mifare read/write
Programmable parameter
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
Combine active and passive RFID
Long operating time on battery
Wireless TAG programming
Supplied without battery (2 x 2032)
RFID Reader Mifare 13.56MHz Indoor, Hex 8 digits, HID - Keyboard Emulation, USB With Removable USB Cable
Keyboard Emulation: 8 digits, 32bit HEX
Frequency: 13,56MHz Mifare Ultra Light
versions: Mifare S50, S70, ISO15693, ISO14443A / B
UID in positive Normal sequence
Power supply: 5VDC from USB port
Operating temperature: -10 - + 75 ° C
Reading distance: 5 ~ 15 cm
Cable length: Solved USB cable
Dimension: 118 (L) x 75 (W) x 17 ( H) mm
Weight: 250g ± 10%
desktop - table model
Magnetic card reader, 3 tracks, USB, HID. For health card / health insurance card, membership card, etc., æ Ø. Black
Reads ISO tracks 1, 2 and 3
USB interface
Emulates a USB keyboard (HID)
Powered by the USB port
Reads e.g. health insurance card/health card - with æ, ø, å
Optional reading of tracks is possible with inserted end character
Omitting text in tracks is not possible.
Dimensions: L 137 x W 49 x H 50 mm
3-track magnetic card reader, PS2, USB, OEM, black
Magnetic card reader - HID. Keyboard emulation
Magnetic card reader for PS2
Can be connected via USB with adapter
USB adapter may require a restart of the PC!
PS/2 to USB adapter included
A reader head / tone head
Black
Works with OS up to and including Win 10
Can read Æ, Ø, Å. oh, oh, oh
Suitable for clinics for reading health cards
Dimensions: L 137 x H 50 XB 49 mm
RFID reader EM 125khz. UID is 40 bits, 10 digit ASCII. RS232, Wiegand 26 Bit, LED, Buzzer. Waterproof. 12vdc.
125khz RFID reader for outdoor mounting on wall
sealed with hardened epoxy - cable mid rear
EM4000 125khz RFID Reader for wall mounting
reading distance 0 - 5cm, depending on roof size
40 bit code, 10 digits ASCII (Decimal)
RS232, only TX. GND
9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
Wiegand 26bit format
LED Indicator and Buzzer Control Manager
Supply voltage: 12VDC / 200ma
Cable length 1 meter (8 Core)
Goal: 114 x 46 x 13 mm
RFID Reader for Mifare Ultralight and Mifare1 Standard Card, Wiegand, MSR ABA TK2 and RS232 Interface, 5 - 18VDC
Reading distance: Up to 5 cm
Frequency: 13.56 MHz
Read Mifare Ultralight and Mifare F1 Standard Tag
Mifare 1024/4096 byte, Ultralight 512bit, ISO 14443A
3 in 1 interface : Wiegand, MSR ABA TK2 and RS232
LED and Buzzer
Quick Data Transfer
Weatherproof, ABS
Cable Length: 90 cm
Cable is not terminated with DB9
Easy to install
Supply: 5 - 18VDC (Liniary PSU)
Dim: 83 x 47 x 16 mm
Dual band RFID reads 125kHz EM, 13.56MHz Mifare, 10 Decimal. HID - Keyboard Emulation. USB. Desktop.
Dual band RFID card reader for USB - 10 Decimal
125 kHz: EM-Marin EM41xx, EM4200
13,56MHz: Mifare - ISO14443A
HID - Keyboard Emulation
Reading distance: 5 to 8cm
Powered by USB
USB interface
operating temp. -10 ° to + 70 ° C
dimensions: 98 x 63 x 10mm (L x B x H)
Dual Band RFID reader 125kHz, 13.56MHz, NFC, EM400x, Mifare. 8-10 characters Decimal/HEX. HID. DIP switch. USB. Waterproof
Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
Dip-SW to ID format setting - see Table
Environment: IP67 Waterproof, outdoor mounting
operating temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm
Dual Band RFID reader 125kHz, 13.56MHz, NFC, EM400x, Mifare. 8-10 characters Decimal/HEX. HID. DIP Switch. USB. Desktop
Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443a / B / 15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
ID Format setting with DIP switches - see Table
Operating Temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm
Magnetic card reader with PS2 connection
To track 1, 2 and 3
Connects via PS2 port
Software not required
data will be inserted where the cursor is (HID)
Sound, reading speed, line breaks and æ, ø and å can set
Weight: 200g
Dimensions: 100 x 34 x 28
cable length: 2 meters
supply voltage: 5VDC (from PC)
Mifare 13.56MHz RFID reader with USB HID. Desktop with card slot. Can be programmed for Decimal/HEX and before/after character.
Mifare reads with USB
13.56MHz
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: ISO14443A, ISO18092 FeLiCa tags
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase
125kHz EM RFID reader with USB HID. Desktop with card slot. Can be programmed as Decimal or HEX. Pre/post grades.
125kHz EM 4xxx reader with USB
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: EC standard 125kHz
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase
125kHz RFID reader for wall mounting, RS232, Wiegand, 10 digimal), reading distance 0-20cm. 5 - 12vdc preferably linear
RFID Reads 125khz Em-Marin
Em 4100
64 Bit Manchester Coding
10 digit ASCII
RS232 - Only TX and GND
Wiegand Interface
Reading distance: 0 - 20cm Depending Of tag
Supply voltage: 5 - 12VDC
Use liniar power supply (not switch mode)
interface cable from the back
IP67
Goal: 78 x 43 x 15 mm
RFID NFC reader, 13.56MHz, USB, HID or Virtual COM, ISO 14443A, 15693, NFC 1-4
Mifare Desktop 13.56MHz RFID reader
NFC 1-4, ISO 14443A, ISO 15693
Other formats on request
HID, Keyboard emulation
Can be programmed for Virtual COM
HEX or Decimal, ordered upon purchase
13.56MHz
5VDC/100mA
-20 - +60°C
Dimensions: 100 x 65 x 25