Z-bracket for Door-MAGNET-V8. 3 parts in extruded aluminum. For inward door
Z Fittings for DOOR-MAGNET-V8
for inward door
consists of 3 parts
Extruded aluminum
Subcategories
Z Fittings for DOOR-MAGNET-V8
for inward door
consists of 3 parts
Extruded aluminum
Mounting bracket Kit. 3 parts
for inward door
Accessories for DOOR-MAGNET-V12CB
Z-angle bracket for inward opening door (inswing)
The set consists of 3 parts
Strong aluminum profiles
Dimensions: 220 x 75 x 47 mm
Accessories for DOOR-MAGNET-V12
Z-angle fittings for inward door (Inswing)
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing
Accessories for door-magnet-mi
z-angle brackets for inward door (Inswing)
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing
Accessories for DOOR-MAGNET-LOCK6
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing
Accessories for DOOR-MAGNET+
z-angle fittings for inward door (Inswing)
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing
Mounting bracket kit. 3 parts
To inward door
angle bracket kit, 3 parts
bracket for inward door
Angle bracket consists of 3 angles
mounting the holding magnet for inward door.
Vinkelbeslag kit med 3 dele
Til indadgående dør
Tilbehør til ALARM-GSM-BASE
Tilbehør til ALARM-GSM-PIR-UD
Kan blive trådløst tilsluttet til en alarmbase
Til tilslutning af kablede alarmsensorer
Til udendørs brug + stænktæt
Forsyningsspæning: 13.8V 200mA
All Weather Exit contact
cast aluminum housing with sturdy green button
contact DPDT (NO / NC / COM)
Monentary contact 250VAC / 3A and 125VAC / 6A
Can withstand heavy weather and extreme environments.
Ideal for doors and gates
Dimensions: W 90 x H 85 x D 58 mm
Waterproof and sunscreens
black | Material: ABS plastic
Dimensions: 15cm x 10.4cm x 9cm
Simple to install and good quality
Outdoor electromagnet for example. lattice door, gates etc.
door magnet with clamping force up to 272kg
Stainless steel and vandal proof
With waterproof gland for waterproof flex cable
IP67 close - designed for harsh outdoor environment
supply voltage by team: 12VDC or 24VDC 6Watt
Automatic switching between 12 and 24 VDC
No holding force when not energized
Magnetic: 218 x 44 x 27.5 mm
Door-plate: 185 x 38 x 12 mm
Operating temperature: - 10 to + 55°C
weight: 1.5kg
door magnet with clamping force up to 545kg
Rusrfri steel cabinet full sealed with epoxy and is vandal proof
Equipped with thread for flexible tube to protect the cable
Supply voltage for team: 12VDC or 24VDC, 6Watt
Cable change-over between 12 and 24 VDC
Only holding force when energized
With Bond Sensor (Lock indicator)
Operating temperature: -10 to + 55°C
Magnetic: 220 x 62 x 41 mm
Door-plate: 185 x 61 x 16 mm
Anti-magnetic feature
Weight: ca. 5 kg
The door magnet with holding force up to 136 kg
stainless steel housing full sealed with epoxy
Voltage for holding: 12VDC 6 Watt
No holding force at voltageless
Operating temperature: -10 to +55°C
Magnet: 170 x 32 x 24 mm
Amaturple plate: 152 x 32 x 10 mm
Anti magnetic function
Weight: Approx. 2.5 kg
Door magnet with holding power up to 545kg
Stainless steel cabinet fully sealed with epoxy
Supply voltage for team: 12/24VDC 6Watt
At 12V connect red to white, yellow to black
At 24V connect white to yellow. Red + Black -
No holding power when de-energized
Operating temperature: -10 to +55°C
Magnet: 220 x 68 x 42 mm
Amatur plate: 185 x 61 x 16 mm
Anti magnetic function
Weight: approx. 5 kg
The door magnet with holding force up to 363 kg
Rust free steel cabinet full sealed with epoxy and is vandal safe
Voltage for hold: 12VDC or 24VDC, 6 Watt
Switch between 12 and 24VDC
No holding force at no voltage
Operating temperature: -10 to + 55 ° C
Magnet: 216 x 53 x 32 mm
Amaturple plate: 185 x 45 x 14 mm
anti magnetic function
Weight: Approx. 4.5 kg
Door magnet with team power up to 272kg
stainless steel and vandal safe
IP65 - Designed for harsh outdoor environment
Supply voltage: 12VDC or 24VDC 6WATT
Prepared for 12 and 24VDC - view Label unit.
No holding force at zero voltage
Dim: 218 x 44 x 27.5 mm
Dim plate for door: 185 x 38 x 12 mm
Operating temperature: -10 to + 55 ° C
Weight: 1.5kg
Buying access system - see accessories
Panelmonterbar EXIT contact for access
Contact COM / NO / NC
Brushed aluminum with green button
Not vandal proof
Dimensions: 112 x 70 mm
Contact up to 2 Amp
Tilbehør til tyverialarm ALARM-GSM-BASE
Tilbehør til tyverialarm WKEY kodelæser
Forbindes trådløst til alarmbase
Tilkobling af flere brugere med forskellige adgangskoder
Kan slå alarm til og fra via adgangskode
Forsynes med lithium batteri
Trådløs udendørssirene med lys til WA-BASE+
Trådløs røgdetektor til WA-BASE+
Trådløs radiorepeater (maks. 10 detektorer til WA-BASE+)
Tilbehør til tyverialarm ALARM-GSM-BASE
Indstrålingsbeskyttet
Detektionsafstand 6-8 meter
360 graders vinkel måling
installationshøjde 3-5 meters
Forsynes med 3.6V lithium batteri
Trådløs passiv infrarød justerbar rumføler til WA-BASE+
Trådløs magnetkontakt til WA-BASE+
Trådløs indendørssirene til WA-BASE+
Tilbehør til tyverialarm ALARM-GSM-BASE
Forbindes trådløst til alarmsystem
Trådløs sirene med nem stik kontakt montering
The contact is for touch-free access.
Up to 15 cm Activation Equipment (30 - 150mm)
Touchless Exit Contact with Relay Output
IR Motion Technology
Adjustable Hold Timer
Adjustable Activation Distance 3 - 15cm
with blue and green LED
Relay contacts for 12 - 28VDC, 2AMP
Robust ABS Plastic front
Supply voltage: 12 - 24VDC
Goal: 86 x 86 x 10 mm
Buy Alu Back piece - see picture and accessories
The switch is for non-contact access.
Up to 10 cm aktiveringsafstens (10 - 100mm)
Touchless EXIT contact with relay output
IR motion technology
Adjustable sensitivity
With blue and green LED
Relay switches to 12 - 28VDC, 3Amp
Stainless steel front plate
Supply voltage: 12VDC
Dimensions: 86 x 86 mm
Timestamp TNA software module for ACCESS RFID KEY and ACCESS RFID WIFI
Monteringsboks til mikrobølgebarriere
Elektronisk kalibreringsværktøj til MW-BEAM100
Thermal sensor for mounting incl. 10 m wire
Easy install
Simple to set up
Promotes hands hygiene and germs free at workplace
Hands hygiene traceability
Interface: Wire, RS232, RS485, Wiegand
Power require: 9-12VDC/AC / 1A
With Relay to be connected to electronic door lock
Weight: 110g
Size: 90 x 85 x 40 mm
Temperature sensor for mounting
10 m wire
Dallas DS18B20 Chip
With copper bracket for vertical mounting (M6, 6mm diameter mounting hole)
Measuring range: -10 to + 85 ° C Accuracy on +/- 1 ° C
Thermal sensor for mounting
Dallas DS18B20 Chip
5 Meters
Temperature gauge
1.8 Meter cable
Dallas DS18B20 Chip
Syge og ældre alarm til WA-BASE+
stand-alone adgangskontroller Mifare
4 x Digital inputs NC/NO Type
4 x Analog inputs. 12 bit resolution
0-5V, 4-20mA or 0-20mA
4 x Relay outputs 5A/30VDC, 5A/250VAC
Up to 10 alarm receivers
1 x USB port for setup
GSM 3G 4G mobile network
9-36VDC (12V / 300mA)
Backup Battery 3.7V 1200mAh
Operating temperature -10- + 70 ° C
Customized SMS Alarm messages
APP for iOS and Android
Delivered WITHOUT SIM CARD
RS232 serielport interface til WA-BASE+
Radiostyret PC-sikkerhedslås til USB-porten
Beskytter PC’en mod at andre kan bruge den.
Radiomodtager til USB-porten og lille sender til lommen.
For 19mm mounting hole
12VDC
IP65
NO/COM/NC
Momentary reset
Metal
Projektørlamper til oplysning til brug af video overvågning
Projektørlamper til oplysning til brug af video overvågning
Local forvarslingslarm to use the fx olietank
Lokal forvarslingslarm til brug til fx olietank med SMS og e-mail
door magnet with clamping force up to 545kg
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, 0.5A / 0,25A
No holding power at any voltage
Operating temperature: -10 to + 55°C
Magnetic: 267 x 68 x 40 mm
Door-plate: 185 x 61 x 16 mm
Mounting plate for the frame: 267 x 40 x 8 mm
Anti-magnetic feature
Weight : 4,9kg
Door magnet with holding force up to 545 kg
Aluminum House and vandal safe
Supply voltage for holding: 12VDC or 24VDC, 6 Watt
automatic switching between 12 and 24VDC
No holding power at voltageless
Operating temperature: - 10 to + 55 ° C
Magnet: 254 x 67 x 40 mm
Door plate: 185 x 61 x 16 mm
Mounting plate for frame: 254 x 40 x 6 mm
Anti magnetic function
Weight: 4.9 kg
Door magnet with holding force up to 540kg
Aluminum House and vandal safe
Supply voltage for holding: 12VDC or 24VDC, 6Watt
Automatic switching between 12 and 24VDC
No holding power at voltageless
with LED indicator
Operating temperature: -10 to + 55 ° C
Magnet: 267 x 68 x 40 mm
Door plate: 185 x 61 x 16 mm
Mounting plate for frame: 267 x 40 x 8 mm
Anti magnetic function
Weight: 4.9kg
Door magnet with holding power up to 816 kg
Stainless steel cabinet fully sealed with epoxy
Supply voltage for team: 12VDC 12Watt
No holding power when de-energized
Operating temperature: -10 to +55°C
Magnet: 284 x 72 x 48 mm
Amatur plate: 250 x 61 x 16 mm
Anti magnetic function
Weight: approx. 6 kg
Monteringsdåse i plastik 115 x 43 x 32 mm
ABS plastic house for Exit button
target: 38.5 x 38.5 x 48 mm
Center hole: 20 mm
4 x mounting holes for attachment
rubber gasket included
Tilbehør til ALARM-GSM-BASE
Tilbehør til ALARM-GSM-REPEATER
Dobbelt sensor med infrarød og bevægelse
Undgår falske alarmer
opdagelses distance 8 til 12 meter
NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!
Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)
Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required
BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!
Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)
Wireless infrared outdoor PIR motion sensor
External antenna
Adjustable range sensor 10-35m / 750 sqm
Battery operated 2 x AAA 1.5 volt
Operating temperature -20 to + 55 °
IP55 close to 150 meters line-of-sight
For wall mounting (fittings included)
The system does not work without reciever PIR-WL-R
Tampering Alarm, Object Counting, Intrusion Detection, Alarm Detection
Advanced Motion Detection (5 areas)
5MP/3MP@ 30 fps, 2MP@60fps
Resolution: 2592 x 1944
IR distance 35m
IP66 Weatherproof
-20°C to 55°C
PoE 8.3W max.
Micro SDHC support up to 64GB
ONVIF
Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC
Stand-alone access control in IP68 sealed housing
ADGANG20-RFID is a stand-alone access control that can control an electronic door lock.
Identification: Via keyboard or RFID EM card/chip.
User capacity: Max. 2000 users.
Identification time: < 20 ms.
RFID Reader: EM type for 125 kHz.
Checking the door lock:
Relay output with make and break function 12VDC or 24VDC / 6Watt
Housing: IP68 sealed stainless metal housing
Technically demanding product - Support hours can be purchased additionally
RFID reader 125kHz and 13.56MHz
IP65
Operating temperature: -20 ° C ~ 60 ° C
1.77’’ Color LCD
Bluetooth / USB
Lock+, Lock-, Monitor
Technical demanding product - Support hours can be purchased
Outdoor finger scanner with RFID and PoE
Up to 500,000 users (1 finger)
Up to 10 fingers per. user
up to 3,000,000 log
CPU: 1.0 GHz Single Core
Memory: 8GB flash + 256MB RAM
2.8 "color TFT LCD
16-bit audio
Operating temperature: - 20 ° C ~ 50 ° C
Weight: 440g
Dimensions: 142 x 145 x 45
Built-in tamper alarm
Built-in Wifi (IEEE 802.11 b / g)
Ethernet: 10/100 / 1000 Mbps, auto MDI / MDI-X
RS485, Wiegand, TTL input, USB 2.0
1 x Relay
Power supply: PoE
Tænd/sluk via lysnet. Benyttes med WA-SWITCH via lysnet (samme fase) til WA-BASE+
Ethernet/Wiegand konverter
Designed for Nayax payment terminals and CCI coffee machines
RS232 Male DB9 connector for interface with coffee machines.
Power(DC), ethernet(RJ45) and external reader(RJ11) ports.
Eliminates the need for CCI to MDB converters
Mounting angle for DOOR-MAGNET-V8 for outward-facing door. The angle clamp is mounted on the lower edge of the door frame.
It is very important that the anchor plate is mounted floating suspended and that it can come into 100% contact with the holding magnet.
Mounting box in metal for EXIT button, cast alu
Size: 112 x 70 x 32 mm
Modtager/ styreenhed til trådløst PIR system
Håndterer 1-3 sensorer/ detektorer
Forsynes via 12V dc 35mA
Driftstemperatur -20 til +55°
IP65 tæt til udendørs brug
Frekvens 433 MHz - rækkevidde 150m
Til vægmontering
Virker ikke uden PIR sensor PIR-WL35
Compact Access Control for Mifare RFID
40mm in diameter, 30.2mm long
Thread is 28 mm
Can hold up to 1000 Mifare TAGs/cards
Relay output COM, NO, NC (changeover switch)
Adjustable hold timer - (potmeter) 0.5 - 100 sec.
Users are created with "master card"
Users are removed with "master card"
No software, no PC or terminal
3 different LED colors
Makes sound when programming
IP54 sealed front
Supply voltage: 12VDC / 70mA
No physical interface
door magnet with clamping force up to 140kg
Stainless steel and vandal proof
supply voltage of teams: 12 or 24VDC, 6Watt
Automatic switching between 12 and 24VDC
Active with applied voltage
no holding power by energized
Operating temperature: -10 - 55°C
Magnetic: 200 x 36 x 23 mm
Door-plate: 152 x 32 x 10 mm
Mounting plate for the frame included
weight: 1.2kg
Door magnet with holding power up to 45 kg
Aluminum + steel and vandal-proof
Supply voltage for team: 12 or 24VDC, 4 Watt
Automatic switching between 12 and 24VDC
The door is locked with applied voltage
No holding power without tension
Operating temperature: -10 - 55°C
Magnet: 70 x 31 x 20 mm
Amatur plate: 60 x 32 x 8 mm
Weight: 300g
Purchase additional access control - see Accessories
Bevægelsessensor med mikrobølge. Til brug i forbindelse med automatiske døre
Reading of license plates with the speed of 0-200 km / h
can register license plates for up to four lanes to 5-Megapixel resolution at 30 fps
Built-in infrared white LED (approximately 60 meters)
RJ45 gigabit port
Sound alarm
ONVIF support
Motion detection
WDR
Micro SD
PoE
12VDC / 24VAC
Extended operating temperature -40 - 60 °
Door status Red / green LED light indicator. 12 / 24VDC /1.2Watt.
Accessories for Door-Magnet-V12CB
L-angle bracket for outward door (outswing)
The kit consists of 1 part
heavy aluminum profile
target: See drawing
IR safety sensor for automatic doors prevent property damage and personal injury
Mounted above the frame or on the door
Relay output connected dørautomatikstyringen
Length: 360 mm | IR beam adjustment: 5-25 °
6 measuring points
detector distance: 0 to 2.5 meters
Max. installation height: 2.6 meters
Relay Output is continuously active when the thing or person is detected
Dimensions: 360 x 45 x 45 mm
Weight: 350g
Supply voltage: 12 - 24VDC or 12 - 24VAC
IP54
EU standard: EN16005
Access control / doorphone with video and conversation
Ultra thin outdoor splashproof IP65 Camera Control unit
The outdoor unit has built-in relay for electric door opener etc.
outdoor unit has direct WiFi to smartphone
Code keyboard and doorbell button
indoor 7 "Touch screen Monitor with extra buttons
Resolution is 1024 x 600 pixels
Space for 64GB memory card for event log
Monitor can be connected to 2 video stations and cameras
The camera has movement sensor
Power supply: 12VDC
Language: English, German, French
Intercom between Indoor Monitorrs
Simple Cable routing - 4-wire
Supports app that allows anywhere remote control
Infrared light barrier
Up to 7 meters between the IR emitter and reflector
transmitter is powered. Passive round reflective piece
Power supply: 12-24 V DC / AC (not included)
Relay: max 36V 1A
Terminal: DC input Relay output: COM, NO (normally open contact)
Temperature: -20 ~ +60°C
Dimensions: 40 x 35 x 100 mm (W x D x H)
Tilbehør: Strømforsyning til IRISID-7111-U1
21.5 "Infostander 1080x1920
Touch Screen
Spritdispenser 4 liters
Low Level Sprit
Adjustable amount of Sprit
Android Based
Wall bracket or foot can be purchased (not included)
Can be used with the Danbit program "Hi Customer"
and for monitoring the number of visitors in store
Call for prices!
Accessories DOOR-MAGNET-MI
bracket for mounting on the side of the frame
Strong aluminum profile
Dim: 170 x 37 x 30 mm
Accessories DOOR-MAGNET-LOCK
bracket for mounting to the inward door (inswing)
Set consists of three parts
Strong aluminum profiles.
Good adjustability
accessories DOOR-MAGNET-DUAL12
Mounting brackets for inward double-doors (inswing)
set contains 5 parts
Strong aluminum profiles
Measurements: The magnetic angle: 534 x 76 x 48 mm. Die-plate angles: 190 x 64 x 64 mm
Accessories DOOR-MAGNET+E
bracket for mounting the inward door
Strong aluminum profile
Set consists of 3 parts
Beautiful stainless steel door phone with 6 buttons / users
Sale - special price
2 x 230VAC power relay /16A – resistive load.
2 x DC switched outputs up to 40VDC/6A, also as PWM for LED, FAN, etc.
2 x independent inputs: 230VAC and up to 24VAC/24VDC, SMS alerts for power failure
SIM card and SD card
Backup battery (not included) as an option – Li-Ion 3.7V (14500)
Switch appliances on and off with SMS messages
GPRS M2M function, TCP/IP Get to directly send input status to Server
Get XML status from server to set device outputs.
Scheduled automatic switching on and off of appliances
Sends power failure warning and recovery.
Restarting appliances, such as servers.
Monitoring of 2 x A/D inputs AC/DC voltages with autodetect
4 x digital inputs DIN1, DIN2, DIN3, DIN4 for DC voltage.
Universal bus (1-wire) for temperature and humidity sensors.
Thermostat function.
Alarm function: Temperature alarm, Humidity alarm, A/D limits, DI change
Alarm in case of jamming of a GSM signal.
Up to 12 alarm numbers, each can be set for different events
Up to 1000 authorized users and 2 administrator numbers.
Bluetooth
All inputs are SO compatible
2 x digital inputs NC / NO type
2 x analog inputs. 12 Bit resolution, 0-5V, 4-20mA or 0 - 20mA
2 x Relay outputs 5A / 30VDC, 5A / 250VAC
1 x USB port
GSM 3G 4G
9-36VDC (12V / 300mA)
Backup Battery 3.7V 1200mAh
Operating temperature -10- + 70 ° C
Custom SMS Alarm Messages
APP for iOS and Android
8 x digital inputs NC / NO Type
6 x analog inputs. 12 Bit resolution, 0-5V, 4-20mA or 0 - 20mA
4 x Relay outputs 5A / 30VDC, 5A / 250VAC
1 x USB port
GSM 3G 4G
9-36VDC (12V / 300mA)
Backup Battery 3.7v 1200mAh
Operating temperature -10- + 70 °C
Adapted SMS Alarm Messages
APP for iOS and Android
GSM alarm controller - sends alarm SMS and calls
8 x digital inputs
Must be programmed with USB cable to PC
Microphone in, line out (listening in and conversation)
Battery back-up
Antenna with SMA male included
4G mobile network
Fjernstyrings-sender over lysnet (samme fase) til WA-BASE+
Special door fittings for DOOR-MAGNET + E + S
L-Bracket: 50x33x251mm (WxDxL)
Z-Bracket: 50x100x190 mm (BxDxL)
Residual sale
USB connection
Demoprogram included
API included.
OS up to and with Vista